E Machine Model W3050 Showing Errors / Unable To Connect?
Aug 24, 2006
It started out as a error 633, and has worked its way around to error 797 after my doing things like destructive restore, uninstall modem, download modem from emachine site, re install, running antivirus, etc...and I still can not use my dailup to get online I can do anything on the puter other than dial up, to get online.
I have a Gateway FX6000 that came with Vista. I have managed to change the OS to Windows XP Pro 64 but I probably have outdated drivers. I am unable to connect to the internet with that machine using XP. I do have Linux Ubuntu installed as well and and using that OS I can connect to the internet just fine so I don't think it's a DSL Modem, Router, NIC or cable problem, it's most likely a driver issue. When I look into XP Device Manager, the Network Adapter shows as 1394 Net Adapter but under "Other Devices" ethernet controller, PCI simple and SM Bus I see big yellow questions marks.Will I need to update those yellow question mark devices and if so what's the best approach keeping in mind that on that box, for XP, I don't have a working internet connection.
In the past few months I've added a 512 stick of RAM and replaced the hard drive in my five year old laptop with a brand new Seagate Momentus. The laptop itself is a Pentium M 1.8 running Windows XP Home (Service Pack 3). Also in the past few months I've started receiving BSOD's for Machine Check Exception errors. The numbers tend to vary, though I can never catch one long enough to write them down, as the system flashes the error screen and then shuts off or reboots.
I've run MemTest as recently as this afternoon and the results came back with no errors found in the memory. I ran a SMART test from SpeedFan on the new HD and it was deemed perfectly fit. Still, I can't shake the feeling there's something going on with the new hardware in this laptop, as I had never even heard of a Machine Check Exception since I never got one until some time after installing the parts.
I notice I get this specific error when playing a computer game (Diablo 2, for Christ's sake, so the game isn't particularly taxing!) or watching video, ie intensive activities. It never happens while just browsing the net. I am not overclocking the processor. In fact, I'm undervolting it to keep heat down, though I've turned off Notebook Hardware Control to go back to normal voltage setting and I still get the Machine Check Exception errors with the same frequency.
I have a Pentium 4 with 480mb of RAM. My problem started about month ago. I would hear a click sound coming from the box and shortly thereafter it would freeze. The three finger salute "Cnt Alt Del" did nothing and I would have to turn off the machine and start again. Sometimes it would boot up OK, then others I would get weird messages..
i am trying to restore my windows xp on an emachine to original factory settings.when i pop the disk in i am getting an error that says cant read R:E17F.GHO. What is that and how can i get this thing working? There is also a message that reads ''Cannot Open GHOSTERR.TXT '' and it also says Floppy Disk(s) fail (40)
I am using an xp machine for my server with mapped drives to the wwwroot on it. Several times, especially today, I will drop the mapped drive connection, and I am unable to remote desktop to the machine. When I switch my monitor over to the machine, the default screen saver is up.I have had to reboot the machine the last couple of times to get reconnected.
I have been having alot of trouble lately. Every time I try to click on a site I get an unable to connect message, if I go back and try again it usually goes through the third or fourth time clicking the link. This is happening with every site. I am running windows ME. I have tried disabling Norton, running ccleaner, all spyware utilities and nothing helps. It has taken me about 45 minutes just to be able to post this message.
I'm trying to connect my PC with Windows XP Pro. via RDC on the internet, the screen pops up with blue screen but it never refreshes for login screen to come. It's stays there while and then it will disconnect. But am able to login on my own network either LAN or WAN. Outside my network it never works, what should I do pls!
for a little while now i've been unable to connect to any servers, or at least thats what i think. I play lots of games online and so on. things were fine and then one day i recieved this error while trying to play 'halo' online. 'An error has occurred while trying to contact the gamespy master server'. after messing around with halo for a while i tried other games; doom3, quake3, counter strike and so on, but all with the same effect, i couldnt connect to a server. This was also the case when i tried to update Ad-aware, it freezes when i try to update. I've checked my firewall and individual programs but have come to no conclusion. have also tried 'system restores' but each time they fail?
I have been having alot of trouble lately. Every time I try to click on a site I get an unable to connect message, if I go back and try again it usually goes through the third or fourth time clicking the link. This is happening with every site. I am running windows ME. I have tried disabling Norton, running ccleaner, all spyware utilities and nothing helps.
I have two PCs, both dual booting Linux and Windows(SP3). I am unable to connect these two PCs via cross-cable on Windows.Windows to Windows connection doesn't work. I tried pinging the IP address of the PCs but they fail/timeout.
hi there, recently on my toshiba's laptop computer I am not getting dial tone to connect to the internet. Yes I am connecting the phone line properly because it works on my sony vaio laptop also when I connect online.i am able to connect on the vaio but not on the toshiba. It keeps telling me there is no dial tone. what is the meaning of this. one last question. On the toshiba laptop there is a blue line running from the top to the bottom of the screen. Is that something bad? is the screen going through?
i have in the windows task manager in the process tab runing system.exe according to processlibrary.com this is a trojan.mitglieder.b and i tried to end the process from the task manager it will start counting and shut down my pc. how can i remove this trojan.?
I have an external usb hd enclosure with an ntfs 320 gb IDE drive inside it.. when I connect it to my PC it shows up as local disk but I would rather it show as a removable disk so I can properly eject it. How would go about doing this?? thanks! (i have xp sp3)
I don't know where to put this topic. But alright so basically yesterday I started having this problem. When I go to anything that uses Java such as Geocities my computer starts making a chugging noise and the browser (IE or Firefox) crashes. It brings up one of those senseless error messages about something failing. I'd look now but it'd close this screen. I tried uninstalling Java but when I try uninstalling the JS2E Runtime Enviroment 5.0 Update 5 it won't let me uninstall either. It makes the same noise and freezes up the window. What in the hell do I do? I've never had a problem quite like this.
I recently purchased a new Hard Drive from Western Digital. It's an Internal 500Gb, and its been running so-so. It's sort of loud, mainly as it sort of vibrates the case of the computer (I have one panel off as the cord im using wont fit). Aside from that ive had no problems.What I'm worried about though, are these STOP errors that occasionally pop up Quote: "MEMORY MANAGEMENT - STOP 0x0000001A (0x00041284, 0x0E586001, 0x000015BC, 0xC0883000)" I know that ...0014a has something to do with memory or RAM, and that 0x00041284 is "0x41284A PTE or the working set list is corrupted." according to MSDN.
my computer got alot of errors, when i play warcraft3 tft in the loading screen sometime it will jam and i have to restart. and alot other problem have in my computer. ya i download a software call Free Registry Fix 3.0 from www.download.com, and i scan for error i have over 1000 errors in my computer. And since i can only fix 50 error coz that software not totally free. so what must i do, can u guyz give me some free web that can dl software that can remove error, or tell me the way to fix them.
I am trying to connect a laptop to our network. When I first logged on a box came up asking for a Netware login (we don't use Novell). I went to the network adapters and unchecked Client Service for netware, NWLink NetBios and NWLink IPX/SPX/NetBios and made sure the DHCP was checked for TCP/IP. I rebooted the laptop and went and tried to connect to the network, still came up with unable to connect, check domain name, etc. Is there anything else I can do or do I have to reload Windows XP?
I followed the advice of the sticky above and with my "refreshed" XP Home Installation on my Dell Desktop, I can't connect to the Internet. The "find a connection" Wizard seems to want to find a dial-up connection and nothing in the way of broadband. I use a Linksys Wireless G PCI Adapter card. The reinstallation did not wipe out any documents or user created files, so am wondering if there is a place in the old Windows files that I can use to get my old connection?
My laptop has been hijacked, can't connect to TSG, homepage's been taken over. I have ran AWSE6, Search & Destroy, but each time everything comes back as soon as it's fixed. Please help, this is my personal laptop and I need it.
I have recently upgraded to WXP Pro from Home and have since had trouble with my monitor picture, it frequently goes into a very fast scroll for a period and the fine again when using the internet.i have changed the graphics card I have changed the monitor and still the same problem. Also I am unable to connect to MSN Messenger but MSN Hotmail etc working fine.
I am unable to connect my winxp computer to my network or get an internet connection. I also get message of unknown protocol when checking the properties.
My host PC (my desktop) is running an ASUS P5PE-VM with 1gig DDR PC3200 Crucial RAM, has a Intel DualCore E2180 @ 2GHZ. I use a dial-up connection, and even though it is dial-up, my connection speed averages from 52Kbps to 54.3Kbps. So its actually pretty good for dial-up. My OS is Win XP wit SP2. I think that pretty much covers the important basics. My client PC (my laptop) is an ACER Aspire 3100 w/ 512MB DDR2 It has an AMD Sempron 3200 @ 1.6GHZ w/512KB of L2 Cache. It also has an 802.11 b/g wireless Lan. I installed a wireless card (Belkin Wireless G desktop card) in my desktop (host) and set up an ad-hoc network between the two. Basically I set up a wireless network without a router. I've done this before and had no problem, however this time I cannot connect to the internet using the client (my laptop). Everything appears to be in order, ICS is enabled on the host, Firewall in configured, communication between the two is there, I verified by pinging both IP's using ipconfig. The host is able to connect to the internet and browse with out no problem. its just the client I am haveing trouble with. Could it be a DNS problem? When I open IE on the client it just displays the 'cannot display web page', I even tried pinging the web page and am successful in that, it just wont display the web page. Am I missing something?
I now think a problem, that may have been a bug, could now be a winsock problem. What is happening, is I cannot connect to windows update. It is only anything having to do with and url dealing with windows update. When I get the screen, "unable to connect" and select to have I.E. run diagnostics, it doesn't come up with anything. I've run serveral virus/malware scans and nothing comes up. I have XP, a legal copy, but it does not have the diagnostics software. I have downloaded some sort of winsock "fix" software, but do not want to run this, in fear of totally messing something up.
I am unable to connect to the internet from a computer that is directly connected to a 2Wire wireless router with a ethernet cable, the serial number to it is 2701HG-B. side note i am able to connect wirelessly with a laptop and even with a xbox 360 with an ethernet cable. i called support and they said that the problem is because of a software app but it is not the anti virus or the firewall i have installed.
I just purchased a new HP computer yesterday. I have a linksys wireless connection. I cannot connect to the internet. I use microsoft explorer. I have been on the phone with Linksys, HP and Netgear for four hours to no avail.
I had to set my XP back to factory defaults (long story) and of course when I did that it wiped out all my stuff. I have my main computer hooked to a wireless router via a cable. The computer that I had to set back to factor defaults in the one with the wireless card. I reinstalled the wireless card software and it it talking to the router but I can't get to the internet.
I had a problem blue screen had to do a clean install of xp pro. I managed a successful clean install, however, I am now unable to connect to the internet, my wired pc doesnt seem able to automatically obtain the ip address from the netgear router. I am able to connect my vista notebook wirelessly using the router.