Although I can see all drive and partitions letters in My Computer, when I go to Disk Management Console all Fixed Disks & Partitions letters have been disappeared. I use Windows XP Pro.
View 16 RepliesI cannot find out why the partition drive letters are not showing up in disk management but are showing in "My Computer". I can view directories and file in explorer but links and commands do not work because they can't find the paths.
View 1 Replies View RelatedYesterday, I had to perform a new installation of Windows XP because I somehow corrupted some system files beyond repair. Now I have everything up and running anew and have made all the Windows updates and it's all honky dory. However, I just went to the Disk Managent Console with the intention of re-assigning drive letter for my storage partitions (not the one that contains Windows) and ran into a problem.I have a partition set up on my main hard disk to use exclusively for Window's pagefile. I have not yet set up Windows to put the pagefile there. This is the next partition after the primary partition that contains the OS. I wanted to set the drive letter of this partition to Z: to get it out of the way in Windows Explorer.
View 10 Replies View RelatedIf I go into Drive Management under My Computer, and I see two "disks" both in the bar for "Disk 1" does this mean that all of Disk 1 has been split into two partitions but is still one physical disk?
View 14 Replies View RelatedI using XP pro C drive 4gigs and F drive 9gigs on a 13gig HD. I want to combine the c and F drive to give me more disk space on the c drive. Or how do I get everything to down load to the F drive and use my c drive just for the operating system.
View 1 Replies View RelatedI have an external hdd...my xp has detected the driver for the hdd but its not displaying in disk management and also in My Computer. I can only see my C drive and cd-rom. How to resolve this coz i have important file there.
View 2 Replies View RelatedOK,i need some help here,after changing desktop casing,I noticed that my 2nd IDE Hard drive/HD is not on "My Computer",check on the Device manager HD is present and when i tried to see the details of my HD on Disk Management HD is not present,so I've rebooted HD is present in BIOS.Things I did:1.Fix windows using recovery console2.Connect/reconnect cables3.Check if HD is still working(100% sure it's working)4.Updated driversAdditional info's"HD is Seagate Barracuda(Master-Slave set up), OS Windows XP sp3**Please note that i can't see the HD on my disk management like any other people would do to fix this problem***If anyone has any other ideas, please let me know. I'm going to attempt trying the drive on a different IDE hannel, and see if that works.
View 2 Replies View RelatedHere's my problem, for no apparent reason my hard drives are not listed under the disk management utility(cd drives appear). They appear on "my computer" correctly, they show up in "Device Manager"(and I have no yellow question marks).In addition in "disk defragmenter" they appear but I'm unable to even run the analyse command(using other software I'm able to defragment them).I've tried EaseusParttion Manager, but the drives don't appear as well.I'm not able to use USB drives as well(I assume it is related), they appear in the right side of the task bar and they appear in "device manager" but not in "my computer" nor "Disk Management
View 9 Replies View RelatedI want to rearrange my disk letters. I have a cdrw and a DVDRW plus 4HDDS the first of which is partitioned. i am running xp pro. The dvdrw is set as master on secondary and its slave is the cdrw. when i go to rearrage the drive letters, the cdrw doesnt show up though it shows up when i click on "my computer"
View 2 Replies View RelatedRunning win-xp-he-sp2 OS. I want to change the Drive Letter for my hard disk #2, but the Change Drive Letter is grayed-out; in fact, this is true for all the drives listed. How do I correct this problem?
View 13 Replies View RelatedRecently my laptop (windows XP home edition) had been having problem with Microsoft Management Console. When I double click on mmc.exe nothing happen and there is also no error message. Because of this I can't start any of the *.msc files
Under Administrative tools (Control Panel)
Component Services - comexp.msc
Computer Management - compmgmt.msc
Event Viewer - eventvwr.msc
Microsoft .NET Framework 1.1 Configuration - mscorcfg.msc
Performance - perfmon.msc
Servicesm - services.msc
Other .msc command : that open with Microsoft management
certmgr.msc
ciadv.msc
devmgmt.msc
dfrg.msc
diskmgmt.msc
fsmgmt.msc
lusrmgr.msc
ntmsmgr.msc
ntmsoprq.msc
wmimgmt.msc
adsiedit.msc
sidwalk.msc
fpmmc.msc
comexp.msc
Difficulty facing to get to group policy editor via run box and to fix the group policy management snap in.
View 10 Replies View RelatedI've had some trouble last week were I got the BSOD, due to some problem with the registry, I couldn't find a solution and so bought a new SATA hard drive and installed XP on it (as i couldn't reinstall it on my old one for fear of losing all my files etc). Now however, after moving all my files into the new harddrive (where XP now seems to be), I want to format the old C: drive but the computer management console isn't allowing me to as the "system" partition is still on the old C: drive.In short, is there anyway to move that partition to the new F: drive where the boot partition is?
View 14 Replies View RelatedI am trying to install the Print Management Console for Server 2003 R2 So far I have added the role of Print Server to the server. Discovered that the reason Print Management Console wasn't an option in the Admin Tools because you have to install it from Disk 2. Tried to install it and was told that the version of windows I was running wasnt the correct one for this update. Tried updating to R2 (how do you tell if the version your running is R2 or not?) but was told the version of Windows I was running is newer than the one on the disk. All I want is the PMC installed...
1) How do I tell whether I am already running R2 or not?
2) How do I get the PMC on this damn server?
When I boot my computer, it tells me it can't load windows because the following file is missing or corrupt:<windows root>system32hal.dllCan i use the "repair console" to copy this file onto the hard drive from a floppy disk? If not, how do I rectify this problem?
View 6 Replies View RelatedI am having a driver problem, which i find to be very weird. I cannot install, or uninstall a driver, nor can i disable on from device manager. When i try to do any of these I get either a "run DLL as an App has enountered a problem and needs to close" or if trying to do something from device manager, I get Microsoft Management Console has enountered a problem and needs to close. In the first case I believe the file was sysag.api in the second the file causing an error is mmc.exe.
View 5 Replies View RelatedProblem with getting device manager to display.Right click of my computer properties hardware device manager and I get a window titled "Microsoft Management Console" "Snap-in failed to initalize CLSID:{742468FC-4C96-11D0-ABEF-0020A-F6B0B7A}"I get it that something is missing, but what? I've tried going to the MMC to add a snap-in but the same window pops up again. Everything on this PC is exactly the same as my other one except that one has some DVD editting software. But they were both installed and maintained (updated) equally.
View 4 Replies View Relateddisk management error. unable to connect to Logical Disk Manager Service. At this point I've tried enough methods and internet - suggested fixes. Disk Management tool does not work :error "SERVER EXECUTION FAILED"
View 2 Replies View RelatedWhen I open my Administratives Tools, "Computer Management console" the "disk defragmenter", the "disk management" are VERY SLOW 2Respond and even freeze (not responding) when I clic on a any of the disk task.I run Win XP SP3 very well so far.. and I had since "few days" problems with a VERY LONG black screen before the logon screen.http://forums.cnet.com/5208-6142_102-0.html?threadID=358991 .first time I resolve it just with a restore back but it begins again.
View 2 Replies View RelatedControl Panel-->Administrative Tools-->Computer Management-->Disk Management, I have 3 HDs: C, F, G I see them in the board as healthy.C with the XP in it says [System].
F says [Active].G says nothing, just [Healthy]Major problem is that in the board also see another HD which I do not have Title of this HD is [Missing] with a red X on it and the description is [Failed].Its in the same size with F so I think its some problem from the time I tried set this disk as primary in order to put xp in it (its a sata on an A8V Deluxe which requires f6 etc etc).So... may i choose delete this fake disk?PS. I use no partitions, just whole disks. Board says me that C & F are Basic type. G and [missing] are Dynamic.
I was having trouble with installing flash for chrome.It always reads the wrong disk because I put in a new HD.My main one is F:/, but flash tries to install on C:I tried to change the drive letter but disk management "fails to initialize" and thus won't start. I tried MS's solution (regsvr32 c:winntsystem32dmdskmgr.dll) but I get an error LoadLibrary("c:winntsystem32dmdskmgr.dll") failed - The specified module could not be found.
View 3 Replies View RelatedWhen I try to reactivate this one drive I get an error:INTERNAL Error - The disk group contains no valid configuration copies (C10000B6).As I understand, something happened to LDM on that disk.I know, the disk itself is good, the data is there..And I know it is possible to restore that information... only with Microsoft help or help of the professional or enthusiast who knows this subject.
View 18 Replies View RelatedI'm testing XP2 on a lab at my office network.I have added program exceptions for
c:windowssystem32dmremote.exe:*:enabled and I've also added port exceptions for ports 135 and 445 and I'm still unable to use Disk Manager to manage remote computer.I keep getting the following message: The Disk Management console failed to conect to the remote computer because the Disk Management remoting sevices is not in the Windows Firewall exception list. Add the Disk Management remoting service (dmremote.exe) to the Windows Firewall exception list and try again.
Windows won't let me partition it from disk management. I'm at lost here. I'm trying to start fresh with a new install of win xp. Got to the setup part where i choose which parition to use, but it says I can't delete the partition because there are necessary files needed on it etc. etc... So I get a win98 boot disk to try to manually format and get to the A: prompt, and it wont recognize my C:
View 3 Replies View RelatedSystem crashed last night with a Kernel Stack Inpage Error, but restarted fine ... while diagnosing, I tried to get in to Disk Management through Admin Tools/Computer Management, and received the error, "Unable to connect to Logical Disk Manager service". I checked, and the service was disabled (why?), so I set it for manual and restarted it, still received the error.Oddly, I was able to start it from a command prompt, which then allowed it to start from Admin Tools. What just happened here? Is that service normally disabled? If not, what would cause it to become disabled? Could a virus, worm, or rootkit have snuck in?
View 14 Replies View RelatedWhen I look at the XP Dish management window, I see an unnamed 5Gb section to the left of C and D drives.It is subtitled (EISA configuration), what is this for? Also the XP help says that there should be a FREE SPACE optoin on the rt-clk menu of the lofical drives. I only see delete. Am I looking at the wrong place? (reason: I would like to create a new logcal drive.
View 3 Replies View RelatedIs there a Microsoft-compatible XP Disk Management utility to adjust the size of partitions? like Partition Magic and others.
View 2 Replies View RelatedI was looking many replies, but could not find any about this topic, I'm facing the following problem: I would like to have my Disk space (750GB) subdivided to accomplish the following:
1 - Boot Windows XP Prof SP2 x86
2 - Boot Windows XP Prof SP2 x64
3 - Store my Data Folders and Files separately (to do Backups from one place).
4 - Boot to Ubuntu 7.10 and alternatively
5 - Boot to Ubuntu Server
6 - Create System Backups for my Laptop (6.1), old PC (6.2) and for this new PC (6.3).
This is my wife's Lenovo T61 and I've posted this in the laptop forums. While attempting to prep for a larger hard drive, I noticed that Disk management isn't showing any HD partitions. It does show the CD ROM device. It will not display USB external hard drive partitions but will display USB CD ROM devices. Device manager and explorer will display hard drives/partitions just fine. At this same time, I found that a scheduled chkdsk /f will not run. The PC just boots normally. Defrag will not run either. I was able to run sfc /scannow plus the Lenovo "disk doctor" utility and nothing is reported to be amiss. Another broken item was system restore. It was enabled but no restore points were available.
View 17 Replies View RelatedWhen I go to Disk Management, my hard drives are not listed. They are visable in My Computer. Nothing is listed except my DVD drive.The reason I was in Disk Management in the first place, I plugged in my backup external drive (500GB Seagate FreeAgent Desktop) and it did not show up in My Computer, so I thought it was a drive letter assignment issue. So I go to Disk Managment and none of my hard drives are listed!
View 6 Replies View RelatedI have run a windows repair twice, and no luck either time. After the first repair the computer worked fine, until I installed SP2, and lost the taskbar, and couldn't fix that (you can view that thread here: http://forums.techguy.org/windows-nt...tart-menu.html. After the recent repair everything went fine until I tried to install SP2 again. I will start the computer, and windows will load. Everything is fine until the login screen appears (windows XP home ed.). The screen lasts for about 1.5 seconds and then it goes BSOD.
View 12 Replies View Related