I recently downgraded from vista to xp pro and during the downgrade i unplugged a 400 gb hard drive that i use only for storage. after a clean install of xp pro i plugged in the drive and while booting i get a wierd dos looking screen that says vista cant load or something of that nature. i unplug the drive and viola xp loads. this is just a back up drive with nothing but music and pictures on it. could vista have written something to the drive i cannot see? format is not an option. if i plug it in after xp loads it works great and i can access the drive perfectly
I've got a Lenovo X60 Tablet, which came preinstalled with XP. Last year I installed Vista Ultimate (OEM version), but of different reasons I do not want Vista anymore on my PC and want to downgrade to XP Tablet edition. I have now a XP Tablet edition that I want to install, but it crashes just after it have started the process. PC is turned on, it boots from the USB CD-Rom drive, it starts to install the drivers, but when it comes to where it says "restarting windows", it crashes and gives me a blue screen telling me that the disk can be corrupted, should be checked for viruses etc. etc. This have happened three times now, and now I have been searching the internet for information of how to work around this. I haven't found any good sources yet and hoped some of you guys at this forum could help me out
With all the threads providing help for people who want to downgrade their Vista OEM branded systems to XP, I'm wondering how you go back to Vista if desired using the recovery partition. In this particular case the computer in question is a Dell. I successfully installed Windows XP, but the MBR was obviously overwritten, so the F8 and F11 keys do not provide the option to access the recovery partition. I did some searching on the web, but I wasn't able to find a solution to this
I got a PC on Boxing Day and got a free vista upgrade when vista came out.So when vista came out I installed it and it was running fine, Then about 3 months later all the problems started here are some of them:
PC takes about 15 minutes to start-up. It goes to the loading then a black screen the after the 15 minuets have gone it goes to the screen where you pick the user you want and it's ok from there on Blue screens Control panel not working ,So Im looking to downgrade back to XP however I don't have an XP disk I have a Packard Bell is there a way I can downgrade with no CD, Someone said it's on a drive but its hidden
I am attempting a downgrade on my Dell XPS M1530. It has Vista Ultimate. I have unallocated hard drive space for the XP partition. When I put in my XP disc, it loads and states that "Setup did not find any hard disk drives installed in your computer. Make sure any hard disks are powered on and properly connected etc. etc." How come this is happening? I know people have downgraded this specific laptop before, as it is all over the internet but I can't find anyone else getting this error
I recently put XP on a Compaq Presario C700 CTO that came preinstalled with Vista. I had to change some things in th Bios for Xp to install and now I need some drivers. Nothing is supported. I received links for various drivers someone told me i needed but none of them worked partly because i wasn't sure how to install them as the instructions were useless. The drivers I'm missing are Audio Device on High Definition Audio Bus, Ethernet Controller, Modem Device on High Definition Audio Bus, Sm Bus Controller, Video Controller, Video Controller (VGA Compatible), and one Unknown device which I think is my wireless (Atheros 06X Wireless Network Adapter). Any help as to how I can get these drivers installed and get XP working would be greatly appreciated.
I bought an HP Pavilion p6101f that came with Vista Home Premium installed on it. I bought an OEM version of Windows XP Pro with the intention of downgrading the operating system. I was told that our network, which runs mostly XP Pro machines, might suffer problems if we installed a computer not running Vista - I guess mismatched OS's might pose problems.In any event, after I booted to Vista, I could not see an option to "Install" XP upon seeing the associated dialog box after inserting the disc while in the middle of a successful Vista session. I then tried to boot to the XP CD, in order to install XP and then restore the system.I kept getting the Blue-Screen of Death.
The computer will begin to boot Fedora (Linux), Windows 7 repair disk, and maybe some others - but not XP Pro.
I want to install Windows XP Pro on my buddy's computer that came with Vista, but I am physically incapable of doing so.
I recently downgraded my HP PAVILION DV6500 from vista to xp because I was having complications with connecting a dial up plus other downloading other softwares. Now that my system is with xp, I have lost sound and some other drivers. I have tried downloading several drivers but none seem to work. Right now I have a laptop without sound or even VGA.I need help.Please,if anyone can send me a software to get back my sound and other drivers I will be most grateful. I like my laptop and don't want to lose it.
Is it possible to have a Vista based system and then load XP on the same system and switch between the two. I know mac's have something similar to this but i have an HP dv7 pavilion notebook with an AMD Turion x2 Dual-core mobile RM-70 2ghz processor, 4 gb of ram, ATI Radeon HD 3200 graphics chip set, and 156GB of free harddrive space
I have just partitioned my hard drive on my computer running Windows Vista, renamed the partition 'X' and I wish to install Windows XP Professional.I have loaded the disk, got the Welcome screen up, clicked the green Install Windows' button and I get This programme is blocked due to incompatibility problems'. It quotes the Windows version on the equipment is more recent than the CD version.It recommends finding a solution on line.Once I get to the Windows site, I don't know what to look for.Should I have done more in setting up the partition (which is already in NTFS format.)I have to do this myself as I am not in a locality with ready help on hand.I am running a Compaq with AMD Athlon 64 X2 D C Processor with 2.87GB of memory.
Dell Dimension E520.The machine came with Vista but it doesn't work with any of the applications that we need. We just went out and dropped the wad of cash on Windows XP and resized the hard drive with the Vista Disk Management.When we boot into the WinXP cd, it loads all the drivers etc but when it gets to "Starting Windows XP" screen at the end of the driver loading (no graphics yet), it suddenly bluescreens and says to check for a virus or run a checkdisk. We tried this a number of times and its not working.Due to the fact that nothing is set yet for installation, the WinXP disk should _not_ be even yet touching the hard disk, just loading into RAM. The machine is new and has 2GB of RAM on it, more than enough for an XP install.Does anyone know what could be the issue? I am wondering if we have to find/install additional drivers at the initial XP disk loading, but I am not sure.
I'm trying to make a dual boot system Vista/XP with my HP Media Center purchased in 2007 with Vista pre-installed. Inside Vista I created the partition for XP (disk D and rebooted with the 'XP Pro SP2' inside. After selecting its correct partition for installing it copies all files on hard disk and it reboots in order to start its installation, upon rebooting and starting first time from hard disk, it says that there is an error in the system and stops. If I install only XP on the system it works correctly even though some newest hardware is not recognized. I had already made a dual boot two years ago with a 2007 XP Student Edition and it smoothly. If it is due to the XP version being too old that maybe cannot deal with the boot record created by Vista Or perhaps such an old XP cannot recognize a boot hard disk that is not C:? Is there a way to bypass this point (perhaps fixing the boot record) in order to continue correctly the installation? Thank you, Al
First my computer was cutting off in the middle of any program. I decided to delete everything on the drive and reformat it and reload windows xp. While trying to load windows xp it would load the set up but when going to load files it locked up everytime. I tried also loading windows 98, 95 and they too locked up. At one point it said I had a virus in my boot sector and at another time it said I had a virus in my RAM. I got a program called PC Beginner to help partition my drive and redo the MBR. I can partition the drive and format it but windows still doesn't load. Now I wonder if there is a problem with the mother board and I have a dual bios board, I was wonder if there is a program loaded in the dual bios that may somehow causing my problem. If so what can be done to clear the problem? How can I get windows reloaded?
I originally had Vista Business edition on my laptop and decided to dual boot with XP. So far I created a partition on the same drive (C: ) as Vista and installed XP on it. how do I choose between Vista and XP when my computer boots up? When I turn on my computer it boots straight into XP and doesn't show that menu where it gives me a choice of which OS I want to boot
just ordered a new pc that is on its way pre loaded with WIN XP PRO SP2. It also come with a free VISTA BUSSINES upgrade. I want to set up a dual boot system when i get my VISTA disk. should i use partition magic and set up a new partition for vista or is there a better way of doing this
I initially started with XP and created a separate partition for Vista, installing Vista on the other partition, Vista sees the (XP) Earlier version of windows. When I choose XP, I get the following error: NTOSKRNL.EXE is missing or corrupt. If I repair the XP with fixmbr - I end up screwing up Vista. Then when I repair Vista, it end's screwing up XP
does ne1 know if vista can dual boot with xp no problems yet only wonderin cuz we are very close to vista, and i want it. i cannot use my dorm room internet with vista cuz of bs security shit.
I was dual booting XP and Vista but didn't want Vista anymore. So I got rid of Vista, and that's all said and done now. Problem is, the boot loader is still coming up telling me to choose between "Earlier Version of Windows" and "Windows Vista". How to I get rid of it without using Vista's boot manager?
I'm currently running Vista on a raid 0 array, and want to dual with XP. I have two partitions, one with vista and the other that I tried installing XP on. After it finishes the initial installation and restarts it says to press any key to boot from the CD. I wait without pressing anything and than it says that there was an error reading the disk. If I remember correctly, after it restarts it goes strait into windows setup. This happens every time I try restarting, but I can get back into vista by putting the hard drive to boot first. In vista I can see the other partition where XP was installed, and inside is just a folder titled WINDOWS and it seems like all the windows files are in there
On Add or Remove Programs, it says "Service Pack 3" and I can remove it, but I'm not so sure if that's the right way. and I installed Windows XP on SP2, and updated my windows, and got SP3.
I frequently see computer advertisements with the Vista OS and there is an option to downgrade to WXP. Why would anyone want to downgrade when XP will eventually be phased out and Windows 7 is on the horizon Years ago I bought a new computer with W98SE and within months WXP was on the market. A short time later W98 wasn't supported any longer. I know some individuals don't like Vista but isn't it just a matter of time when XP won't be supported by Microsoft I am an XP user and will soon be in the market for a new computer so haven't had the opportunity to try Vista
After trying VPC with Win2k I noticed everything is a lot faster and responsive, only start up is slower when compared to XP Pro. Should I downgrade to Win2K, This is unbelievable even though I was running in VPC Adobe Photoshop CS2 was running faster in the Virtual PC then it would on my XP
i just bought a hp dv9730US. It comes with vista home premium. I want to downgrade it to Xp Professional or just XP home. I am having trouble finding the drivers for the applications
We have a new laptop that came installed with XP SP3. Software that we use from Rockwell Software (several packages) is not certified for use with SP3. Is there any way to remove SP3 and get SP2 on it
It had Windows vista in it and she had someone put Windows XP in it. It now has a virus and my friend wants Vista put back in it. I have a cd here that says TOSHIBA recovery and applications / drivers, Satellite A130/ A135 series, Windows Vista Home Basic 32-bit. I put this cd in the rom and restarted. it did nothing. just loaded XP up again.
I have service pack 3 on my desktop pc with windows xp. is it possible to downgrade to service pack, my wireless usb adapter will work on it properly, This is what I was told to do by a tech at Linksys just now, although it worked fine last night, they know they have issues with service pack 3 on xp, and have not got a driver working yet for service pack So they told me to downgrade my pc to service pack 2 until they do have a good driver
I have Windows Server 2003 on my laptop and would like to 'downgrade' it with Windows XP Professional. The CD-ROM (XP OS nstallation) does not allow my to INSTALL XP (cannot select the on) maybe because downgrades are not allowed. I also tried to reformat my hard-disk and install XP from scratch. My laptop have just one drive (C: drive). When I force to boot from my CD-ROM (BIOS settings), nothing happens Boot error
