I have some kind of puter glitch in that when I restarted my desktop, it now goes into a virtual loop of resetting itself. I have taken out the master drive, put it into another PC, and ran diagnostics/virus scans/worm checks/etc., all coming up negative. But no matter what I've done (won't go into safe mode, won't do last known configuration, etc.) it still resets itself. I've now started the task of taking off all of my files & data so I can send the PC back to be fixed (unless someone has a good idea of what to try next). My concern lies in the registry/win.ini files that "tell" the PC how I want/have my files & programs. If I make a disk image of the drive, will that "reset" my settings when my PC is returned? I don't want to have to reinstall everything and redo all my settings, etc. (I-Tunes, MS Office, etc.). Or will that potentially cause it to have the same problem over again?
I have been in the recovery console, I have tried making a winpe boot disk "Failed due to errors" tried fixing the MBR, even tried to connect to it remote with regedit to make some changes in the registry with out success. I have even installed another copy of win xp on another drive and booted the system up with the 250gig in it and changed the drive letter in there. After taking the one drive out and booting with the 250gig it still has a letter of "C:" and still the same login loop.
I have Win XP Pro SP2 I also have an external Lacie 250GB hard disk I want to store my Virtual PC files on. But, it is formatted at FAT32 and I can't put a file on there that is over 4GB. So, I tried to convert the drive to NTFS, but Windows won't let me do this. It keeps telling me the disk is dirty and to run chkdsk / f. Which I have done and completes fine finding no problems on the drive. Yet convert e: /fs:NTFS still does not convert the drive reporting it is dirty. What is causing this and how do I fix it? I have tons of data on the drive so I can't re-partition it as I don't want to loose that data. I need to convert it to NTFS.
I want to take an Image of the entire Hard Disk and make a CD of it. When this CD is put on a brand new computer, it should, without human intervention recreate the same Hard Disk info including partitions, OS, and any software that was installed such as, Antivirus, Databases, programming environments( C, Turbo C++, .NET , Java etc.). Now, I know that there are softwares that help in taking such an Image of the Hard Disk. What I want is info on
1. which one is best? 2. whether it is available for free?(doesn't matter whether it is a trial version.) 3. if I download it from the net will it work?
I have three same laptops with same Windows XPs, and want to burn the one disk image for backup, if the laptop needs to reinstall, i can use the disk image to restore all of initial configurations. how to burn the disk image from Windows XP?
I was wondering if there is a good way to store a disk image of a hard drive either within that drive or on a server and have it overwrite the booting drive on every boot? I work at schools with computer labs and sometimes the kids mess up the computers and we have to run a Ghost Multicast session to wipe the drive. But everyone has been asking me for a way to wipe the computers clean on each boot? File loss is not an issue, as kids save their work to thumbdrives and network shared folders.
I currently have 2 x 250GB hard drives; the first with XP and Vista on separate partitions, and the second for data/media. Is it safe to restore an OS disk image without removing the partitions i.e. restoring an XP disk image back to its original partition whilst keeping the Vista partition intact. I'm trying to find a safe/efficient way of backing up my OS's by saving disk images to an external hard drive, so if something goes wrong, ie doesn't boot, I can restore an image via the other OS.
I have a problem with understanding the differences between these words (actions), when I use Retrospect,( a backup program,) I cannot read any files since the backup file turns into a huge something. When I backup, I mean I copy my files from one drive to an external drive and I can always restore them or copy them to another computer. These are for my files. When I want to re-install a program, I take the original disk or the zip file I downloaded, stored on CD or another external hard drive.
I protected my personal files in WXP and made an Acronis true image of the disk. After a disk crash, I rebuilt a new disk instead of using the image but want to get to my personal files by using the Acronis image mount utility. The tool works pretty well, the image looks like drive "G" when mounted and I can see all of my files, except for the personal ones. My new WXP load has the same user name, password, and computer name as the old one did. However, the NTFS security will not let me see or take ownership of my personal files. I dont want to have to restore the old image just to get my files but will if I have to. Any ideas for an easier way?
I am trying to burn an iso image to a DVD+R disk using NERO 7.0 Ultra Edition and for some reason when I go to burn the image, it tells me I need a CD-R or CD-RW. I just bought some DVD disks for the first time yesterday. I have used regular 800Mb CDs to burn iso images before with no problem. What's the deal with the DVD iso burning?
i have a p4 2.6 ghz pc running xp that i want to reformat because its pretty slow and clunky these days.My question is how can i clone the hardrive onto an external drive, reformat and than just migrate the user folders over from the disk image?I own acronis true image and wonder if i can do this with it?
I am running Virtual PC 2007 on a Vista Platform. Everything is good with the exception of setting up shared folders. I have three guest PCs running. I have installed Virtual Machine Additions on all three. I am able to set up and access a shared folder on the host system on one of the three with no problem but the other two refuse to access any shared folder. When I configure the shared folder, it shows up in the guest PC under MyComputer, but it shows as "disconnected" and is inaccessible.
Im intrested in purchasing a product to clone hard disks in Windows but I have a question before hand If I clone a hard disk into some DVD´s and the I want to restore that image into another hard disk, a new, different size/brand hard disk. Is that possible? Is there a "correct" way to do it? Someone reccomendme either Norton Ghost or Acronis True Image, but Im not sure if itll help me. I hope your answers help me to decide weather to buy the software.
I keep getting the error message that my Windows virtual memory minimum is too low. I have Microsoft Windows 2000 and the following settings: total paging file size 205 MB; minimum 2 MB; Recommended 190 MB; Currently allocated 205 MB; current registry size 21 I'm not the system administrator so I can't change these numbers. I also couldn't find the pagefile.sys that someone suggested looking for. My IT guys don't know what's wrong; they reformatted my computer but I got this error message again. What should I tell them to do?
I am trying to create a full HD image of my Dell c800 Laptop using Drive Image 7 (circa 2003) to an USB HD. I have tried twice and received failures about my HD having bad sectors OR locked sectors. I ran check disc with repair and did not find any problems. Re-ran check disc from the boot disc that came with the application and found no problems with the disc. Tried again for a backup and received the same error. I am thinking it is one of the programs I have loaded has a locked sector or one of my processes that loads during boot is the problem?
So two days ago my computer suddenly decides that when I arrive back home it would want to start running like a win 95. Thus, I promted to shut it down. Once it arrived to the loading screen after the reboot nothing occurred. I then decided to wait... 30mins later it goes black and then the message arrives: "Winlogon.exe-Badimage The Application or DLL C:/Windows/System32/sfc.dll is not a valid windows image. Please check this against your installation disk settings." I have alot of stuff on my computer I need for work, is the only option to deleted everything and re add XP?
it gave the c drive a big red X and dropped tons of pos.tmp files in places. I downloaded an antivirus (the program was fine, it worked for my friends who had the same virus) and ran it. Randomly in the middle of the running my computer just died. It reset itself. So I went back into the account, and it reset itself again. I've done some work and am able to realize that the system will LOAD to the point where the account becomes active. Before any program can be used the computer restarts itself.
To be able to set your own screensaver, follow the following instructions: Go to run and type gpedit.msc Navigate through User Configuration>Admin Templates>Control Panel>Display Double click Screensaver Enabled and apply. This should fix it. NOTE: Group Policy Editor is only available in XP Professional
recently my pc has been resetting itself(rebooting) for no apparent reason,i also experienced a crash with corrupt screen graphics.My pc has been stable for 4 months now and i have not recently upgraded harware or put any new software on the pc?
My install of XP Pro now resets itself 5 or 6 times a day without warning. It can happen anytime, and it's as if I've pressed the reset button on the case but obviously I'm not. I've got Sophos AV software, Zone Alarm Pro and Spybot installed and these can't find any virus's or spyware or malware. It's driving me mad because before this it was a very stable installlation.
I'm having a keyboard problem that nobody can solve. Should I reinstall the driver? Windows says if I remove the driver it will automatically select one the next time I reboot. Has anyone done this? I'm afraid it will screw up like most Microsoft programs and I'll have a laptop with a dead keyboard.
I have a laptop from my old company which I used to use to login to work.I have not used it for some time and I can't remember either my own password or the administrator password.My old company used Active Directory so I am not sure whether any of the solutions available on the internet would work because of Active Directory. Can anyone help me reset either my own password or the Administrator's password so that I can use this laptop? The OS is XP.
I was reading a string from 2007 on this site about a similar problem I'm having. My XP computer keeps resetting and after the computer restarts and an error report is sent I get a rather vague web page from Microsoft that a device driver might be at fault.
The string I mentioned reading involved a member here that seemed very knowledgeable and quite helpful, I think it was "The Hound" at any rate in reading the string The Hound recommended setting up the error process, for lack of a better term, to not automatically reboot so the message on the bluescreen could be read. I've done that but the system is stable for now.
I bought my laptop through the university and it came with XP Pro preinstalled on it. I did not receive any cd's with it and was wondering how to go about getting it back to a freh copy of windows. I think my registry is buggered now and wouldn't mind starting afresh. I did some digging and found a thing called sysprep that has the option to prepare the machine for the end user.I'm wondering if I pushed it that would take it back to the state
I have XP SP2 with a Sandisk C250 MP3 player on it.Two things I am having a problem with:I have a mini-SD card in it, WMP 11 sees it has music in it but will not tell me what it is. Player itself recognizes the music and the music is on the hard drive of that PC (WMA files). Short of buying a card reader and reformatting, then reloading, how do I delete music from it. Is the card the problem or WMP?
Windows display setting keeps resetting after startup On startup of my computer the monitor screen displays normal sized icons, then enlarges to gigantic icons. After all programs are started I right click on the screen and click on properties. Display properties open, then I click on settings and move the slider to my likings, I click apply and the desktop reverts to normal size and operates in all areas normally. The problem is I have to perform this task every time I restart my computer. It's obvious that the apply/ok setting in the display properties setting is not sticking. Is there a fix for this condition? Please HELP. Running Windows XP.
Submitted by: Mel W. Here are some featured member answers to get you started, but please read all the advice and suggestions that our members have contributed to this question. ....
I reset an account password by typing in "control userpasswords2 " in the Run command and clicking on an account and clicking reset password. When I came back to that account on which I reset the password on, some of the things are reset. I noticed that one thing that is reset is the MSN Messenger background images. For the Background of MSN Messenger, I had other downloaded background pictures in the Backgrounds tab, but now I don't. There only saved in my folder.
