My son recently used our computer one evening and logged off without a hitch. The very next day, when I went to use it, all I got was the WindowsXP splash screen indicating that the system was loading. However, that's as far as the operating system would go. I can only use the computer in Safe mode. I have all the backup & resource CDs. Is there anything I can do besides a full restore. What do I do first? This is a WindowsXP Pro MCE2005 operating system.
So I was surfing the net, when I got the dreaded BSOD, so I restarted my machine, and the flash screen cameup okay, at first, after the flash screen, it was saying "Loading descriptor for PBR 2...done Disk Read error Press control, alt, delete ro restar now it is saying"Loading descriptor for PBR 4...done
I've done something and not only do I not know what I did, but how on earth to get around it. I've been working on a Dell system and have gotten rid of several games, programs described as spyware or adware when I googled them and that's about all. Now, however, the system simply won't boot up. It just keeps looping after the Dell screen comes up. I tried booting from a boot disk from drive A: but can't even get in that way. Does anyone have any ideas what I might have done and?moreover?how to get in to the darn thing so I can fix it?
I went away at the weekend, came back on Monday and the PC wouldn't boot. It gets to the point of the loading bar / splash screen and then just stops, the PC then has to be turned off or reset. It will boot into safe mode and seems relitively responsive, there are no signs of any spware of viruses and the last windows update was done in November.
What I mean is: Microsoft Flight Sim X comes out in a few weeks and I was wondering if there is a way to easily boot up without all unnecessary programs loading, to free up memory for the game itself. And I was hoping this could be set up to be done easily when I wanted to. is there a program maybe that I could download that would do this?
System will not boot pass Dell welcome screen. Does not respond to F2/F12/F8 and this all began after i clear cmos. Original problem was BSOD so now i wish to do a clean install but unable to enter the bios to set PC to boot from CDrom. Got into safe mode once but it freezes. I piggy back the HD to another pc, did a virus/malware clean then defragged and clean the hd. Now i am ready for a fresh install but cannot get pass the dell screen. I tried 4 keyboards but still the same. The dell screen shows the F2=SETUP, f12 = Boot menu and Bios revision 1.0.10.
All of a sudden when I start my dell - it does not boot.I just get an amber blinking light on the start up button. Nothing on the monitor.We have had many power outages in my area after which this happens. After a day or so the Dell will boot up. Yesterday I just pressed restart and since then all I am getting is the amber blinking light again on the start up button and nothing on the screen.
I have 2 computers (well more than that but for this i have 2) One works and one doesn't. I took the hard drive out of the working one and put it in the non working one as the master. (BTW on the non working one its just the hard drive that is working properly) I put the hard drive from the non working one as the slave so i can try and get some files off of it and format it. So I boot up the system and the computer recognizes it but then i get an " Error Loading Operating System" error.
If this has been addressed in the forums; then apologies all around. I have a Dell Latitude L400. The HDD has been low level formatted and is clean, I also know it to be fully operational, It won't boot from the USB port, so there is no hope of loading XP back onto it through a usb dvd drive. I have read that there is a docking port adapter for this thing, but the cost of finding one; well, you do the math. I have tried repeatedly to 'preload' DOS or even XP to no avail. Call it Karma or stupidity, but I simply can not find a definitive answer as to how to get anything onto the laptop drive stable enough to get Xp to load normally. Forget the preloading from another computer because all it does is 'windows' logo and then blue screen, so that's out. and no amount of bios jocky-ing is going to do it either. And just to be redundant, this isn't a netbook or current technology that recognizes booting from the usb port, so we can skip that too.
i need help with my dell easy note laptop well when i turn it on it comes up at the bottom with a progress bar (almost like the one if you shut the lid and open it and again and it says resuming windows) wich takes a very very long time to complete and when it dose it then starts windows any idea how to make this startup quicker or maybe even get rid of that bar altogether
My computer tries to boot, it takes a while to detect anything from the CD-ROM (my first boot priority), and then when it detects the IDE, it says "error loading operating system" and after that I can't do anything but restart or shut down. I am running Windows XP Professional and it will load with a boot disk, but if I take out the boot disk it won't load.
Ever since i bought the PC i had a trouble every now and then upon bootup, the xp loading bar would freeze. I would restart select the option to start in safe mood. Then would reboot and start normally. Happened maybe 4 or 5 times in the six months i have had the PC. However i turned it on today the same thing happened so i started in safe mood and still had the problem when i tried to reboot. Next step i went to msconfig and removed all non essential startup items. Then repeated the reboot step and still no luck. Since then i have tried to reboot a number of times. Now the next problem is my PC now freezes when i click safe mode.Anyone have any idea as to what can be done or what could be broken.
My friend told my about TinyXP (windows xp with a lot of crap left out = fast) I don't know if I can give you the link where I got it because maybe that will be seen as advertising.But whatever, the problems I have don't have to do with the TinyXP specific I think, they are also occuring when isntalling a normal windows XP versionWhenever I boot from my cd, the setup is loading But after that, I get: the setup is starting and then BOOM, blue error screen:Quote :A problem has been detected and Windows has been shut down to prevent damage to your Computer
This post is to address certain errors that can be encountered in using UBCD4Win, building the Ultimate Boot CD for Windows.If you have a Dell OEM XP SP2 CD, you may get the following errors during the build of the UBCD4WINBuilder.
PS fan runs, CD drive lights, opens, closes. On opening case, standby light on MB is on, stays on when computer turned off with power button. Stays on when plug pulled short time, less than a minute, goes off. When plugged in, fan starts, standby light lights, even before power button is pressed. Removed CMOS battery, waited five minutes, SB light still on. (Dell online says don't change PCI card while light is on.) The computer is my college G-daughter's; I'd like to get it fixed and back to her ASAP.
When trying to boot my computer it freezes.I have tried to boot into safe mode with no joy and then safe mode with command prompt.The last entry with command prompt is:multi(0)disk(0)rdisk(0)partition(1)WINDOWSSystem32DriversBTHidMgr.sysNow using the little I know about computers I am guessing that it is hanging whilst loading the driver BTHidMgr, what ever that may be and at a guess I either need to delete that driver or repair / replace it.... but.... thats about as far as I can guess.
After a visit to the wonderful land of pornography, my dell (about 5 years old) has decided that it doesn't want to boot past the loading screen. Just before this happened, I booted up and the screen froze on the desktop, flashing some distorted lines across the center of the screen. I have tried rebooting multiple times and running diagnostics, but nothing appeared wrong. I'm going to assume its virus related.
booting my cpu because it hangs at the loading screen. I have read a lot of posts but none of them help because I can't get the cpu in safe mode. I have tried all the options and all kinds of boot disks.It won't let me use my keyboard to highlight any of the options where it says windows had problems loading and gives several options like safe mode or last good config. The keyboard will let me into the bios but after that it won't work. f8 won't take me to safe mode and it won't boot to the cd either. I had this problem once a few weeks back but I created a boot disk and after I booted from that for several times it started booting on it's own. I got the boot disk from a web site but it wasn't an xp boot disk.(i think it was an 98se or me disk) Well of course now either I have lost the disk or it just won't work anymore. I need to find a way to at least boot it long enough to get the data off. the file system is ntfs and I am using windows xp pro.
My brother's computer froze so the only way i knew to turn it off was to uplug the power.. I did that and ever since then i cannot get the computer to boot up all the way it just gets stuck on the xp loading screen.. Ive tried starting in safe mode, normal mode, and "last know configuration that worked" mode.. When i boot from my boot disk i get into the window's console, i try and choose the repair option, when it lets me do this it asks for a "administrator password", i dont remeber using one when i installed windows. I know the "quick" fix is to do a complete reformat and install, but my brother has alot of work files that he does not want to loose. This is my brother's computer, i always make a backup disk of my files for this reason.. but he didnt so im stuck betweena rock and a hard place.
I was playing a game last night (a legit game) and it freezes, so I restart and get the whole "Sorry for the inconvenience windows shut down to protect files on your computer" screen and it asks me how i want to boot up XP, either in the safe modes or Last known good congifuration or start windows normally, so i use last known and the windows loading screen comes up and the blue bar is passing by normally, but it goes for a very long tiem and eventually freezes and I have to restart. It also does this whenever I choose any other way up booting XP too. I've taken my computer apart, cleaned it, unplugged everything and plugged everything back in, read justed the harddrive and NOTHIGN works. It still gives me the frozen windows loading screen. Is there ANYTHING I can do to solve this problem short from hooking my hard drive up to another computer and seeing what's wrong from there?
My computer was running fine last night, but today when I tried turning it on, it came up with "Error Loading OS" on the boot up screen. It has never done this before, and it will only work now when I have the Windows XP disk in the CD Drive. I even tried unplugging everything and plugging it back in, but it still won't work.
My XP has recently started freezing after the xp loading screen. I have to restart several times for it to work properly. I've tried to fix it with registry scanners etc.
Dell that has been fried by lightning and wants me to get the pictures off the Hard Drive. No problem, sort of. The problem is that now I see no info when I boot the computer. The monitor only comes to life when windows starts up. So, I can't enter into the BIOS, change my boot drive, mess with my arrays, or anything. I'm using Windows XP SP2. My HDD are SATA while the Dell's was IDE (just thought I'd throw that out there). Problem occurs after the Dell HDD has been removed.
I'm using a Dell 9300 Inspiron laptop that was working just fine yesterday. I shut it down and now it won't boot into Windows XP Pro SP3, it goes past the Dell screen then goes all black except for a curser on the top left of screen. It will not boot into Safe Mode (F8). I can boot into the BIOS (F2) but see no discrepancies and can change the boot from the HD to the CD drive. What I've done so far:
1. Inserted the Dell Utilities CD and run full diagnostics-no problems found. 2. Inserted the OS disc and ran XP repair, it finished with no problems shown and then reverted to the black screen with the curser.
I have access to a SATA dock and could check it there but there must be something else, especially since I can't even get into Safe Mode.
