I am trying to create a boot disk for my Windows 2000 Professional system. I saved the files boot.ini, ntdetect.com and ntldr. When I restarted my system to test the disk it told me that the boot file did not exist and it was also asking for this file ntoskrnl.exe. Now when I tried to save this file to a disk the file was to big. What can I try so I can create my boot disk.
View 6 RepliesI have ghost 2003 installed on my pc and want to create a Recovery Disc (Windows XP and installed drivers). The only problem is I have no floppy drive. Could anyone give me step by step details on how to do this. I have tried ghost boot wizard (need a floppy).I have tried Disk to Image and then Image to Disk. I wiped out all that was on the 1st drive (C) and Partition (D) and all that was on the 2nd drive (E). I don't know how it happened but it did. I have now reinstalled Windows and all the drivers but I still want to make a recovery disc.
View 7 Replies View RelatedI need to flash the BIOS on my motherboard. First, however, I need to create a BOOTABLE floppy on which to save the original motherboard BIOS and the flash memory writer before flashing the motherboard to the new BIOS. That way, if the new BIOS doesn't work, I can Flash the old BIOS onto my mb,. A WinXP Pro SP2 Command Prompt will not permit me to execute Format AS. So, how can I create a bootable floppy disk under WinXP Pro SP2?
View 7 Replies View RelatedI have recently restored my PC to it's original state as bought from the shop using the Recovery Disk supplied leaving just the Operating System.A friend wants to do the same but has no Recovery Disk. His PC was built by an independent.
Is there a way of creating a recovery disk to do this or is there site to download the relevant info/software.
I am using XP SP2 and I would like to know how exactly do you create a boot CD? I do not have a floppy drive so cannot create a normal boot disk. I also do not have a Windows XP installation CD either as one did not come with the PC.
View 7 Replies View RelatedSince XP Pro original doesn't recognize SATA HDs, is it workable to create a install CD using Original XP Pro CD and add in SP1a and slip-stream them together on a new machine having SATA HD?Will this allow XP to recognize the HD and use it well?Similarly, same idea regarding XP HD size limit of 127 Gigs pre SP1a?
Current HDs are so large.How to create such disk ((Tutorial link)?
I have Hp media center with 1 Tet. dirve (this was installed) lateron. I had installed meida center 2004, 2005(winXp pro) when Vista Came I Installed Vista unfortunately clean install. so I lost xp.Now I am tinking to install win98,2000,vista and linux if possible then Media center winxp pro ver.How I should procede. If I go by installing with win98 and partitioning and installing os.
View 3 Replies View RelatedI bought my Dell 4700 about 6 months ago and was just going through the discs that came with it. I remembered that the Dell did not come with a Windows XP install disc in case I need to re-format. Is this normal? There is an option under Start....Accessories....System Tools to create OS backup disc. Is that what I need to make a disc or should it have came with one?
View 6 Replies View RelatedGetting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
View 13 Replies View RelatedMy computer was working perfectly well. I left it on and went out. When I came back it had a black screen saying "boot disk error, insert system disk and press enter" in BIOS. This has happened before but I just hit my pc then rebooted then no problem. This time it didnt work, I have tried to vacuum the interior of my pc but to no avail.
View 9 Replies View RelatedWhat can I possibly do to solve this problem? I have Windows XP and everywhere.
View 1 Replies View RelatedDisk boot insert system disk and press enter comes what do i do?
View 2 Replies View RelatedHey, have built a new pc, but am using the same hd as my old one, when booting i get a "disk boot failure insert system disk and press enter" however when i press enter it boots up, not really a big problem just annoying and i wonderd if anyone could help get rid of it.
View 4 Replies View RelatedI have 2 hdds on my system and windows xp crashed and would not recover from main drive so in an effort to save my data I loaded windows on secondary drive which worked, and gave me access to the old drive, all files were in tact and so I tryed to use windows recovery on winXP cd to no avail. When I try to boot from the original drive I get "boot disk failure, insert system disk and press enter" The thing that makes no sense is that I have rewritten the boot sector and mbr I also used the automatic recovery feature on the windows install disk and all looked like it went fine but still no boot
View 2 Replies View Relatedfirst i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
View 3 Replies View RelatedI Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
View 3 Replies View RelatedI have just recently gotten a new computer which came with Vista. Previously what I have done with any new operating system I got was installed it into my old computer. However, I came to find out you can only have one computer assigned to each cd, unless I wanna buy another one, which is unecessary. I wanted to get rid of Vista and return to XP but the XP disc would not install because of multiple errors, such as missing ntldr.
View 14 Replies View Relatedbecause mine won't boot. I get the message: "Windows didn't start because of a computer disk hardware configuration problem. Could not read the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your reference manuals for additional information." Well, that sort of thing is beyond me. But first, my system and how I got into this mess:
Trying to get rid of the screen that prompts you on boot-up to select an OS and counts down the seconds, I went from My Computer>Properties>Advanced and unchecked the first box, the one that has a place to the right where you say how many seconds to display the OS choice. I had changed that choice to "0" many times, but eventually the choice screen always came back, so I got the idea of unchecking the whole box. Then--I forget exactly which part of Properties this was in--I found the two OSs listed. They were the same, except that the one that was selected had a few words after it that began with "No"--maybe "No selection"? (This problem of having to make a choice on boot-up started when the computer was new and something went wrong and a Dell technician had me reinstall the OS.) I thought maybe I could get rid of the annoyance by selecting the other OS, and did it.....
My dad sent my daughter a "E Machine" with XP Home. Before he sent it, he transferred all of his personal files. When I hooked it up, the screen said "Boot disk failure. Insert system disk and hit enter". The company sent us a new set of bootable CDs as we thought the problem might be in the CD.
View 14 Replies View RelatedFor some reason my other computer i dont understand it alot but when it comes to a Disk Boot Failur, enter system disk and press enter i usually just shutdown computer plug out the wait around 5-10mins but for this time it has really driven me up the wall. at the moment now it hasnt worked and im asking for help here are some of the things i did... like i said before jst left it and wait... putting OS disk in and try to repair didnt work... try to reinstall didnt work it said it cant OS system something like that... changing my boot system to have HDD first and than CD-ROM than floppy (yes i do have a floppy drive).. but one thing it had told me Win XP when i first tried to repair it it said you have to quite when it count down on when to reboot it said if you have a floopy disk unplug it out and i did it and still not working.
View 7 Replies View RelatedI recently created a new "File Type" for file extension "H" (C source header files) and changed the "Open with" setting to that of my favorite text editor. Now, as expected, my "H" extension files have my text editors icon next to their names and when I double-click on an "H" extension file, the file opens in my favorite text editor. All good so far.Next, I created a new "File Type" for file extension "C" (C source files) and changed the "Open with" setting to that of my favorite text editor. When I double-click on a "C" file, the file opens in my favorite text editor as expected, however, the "C" files icon has not changed to that of my text editor and when I close & re-open the "File Types" dialog I do not see the "C" extension entry at all.
View 1 Replies View Relatedanyone know the best program for creating new icons and/or editing existing ones? "Whatever you can do or dream you can, begin it.Boldness has genius, power, and magic in it."
View 2 Replies View RelatedI'm wondering, is it possible to create a folder right beside the favorites in IE7? (Just to the left of the tabs.) I know folders can be created inside of the Favorites folder, but I was wondering if there could be a folder created right beside it, or in some place else that it would show up there or also where the Favorites is on the right side of the start menu.
View 8 Replies View RelatedI accidently deleted the userinit.exe file, creating the log on/log off problem. I have gone into the recovery console, navigated to C:/WINDOWS/system32, but when i tried "copy userinit.exe wsaupdater.exe" it says the system cannot find the file specified. Help ?
View 21 Replies View RelatedI have an issue here. I have a computer with a faulty version of Windows with some features missing. Basically, I have a Windows XP CD and I want to reinstall windows without reformatting. What i'm thinking of doing is setting up partitions C: <- For the new Windows Installation D: <- Previous Installation and maybe: E: <- Ubuntu F: <- Swap partition I don't want to use the previous installation, I jsut don't want to spend several days backing everything up.
View 9 Replies View Relatedhow do i create a batch file to change the proxy in IE? a batch asking Home or Company is fine. If it is at work, then apply the proxy addresss and port and bypass proxy. Else, turn off proxy.
View 6 Replies View Relatedif I try to create a new shortcut, I get the message that this program does not have a program associated with it for performing this action. Create an association in the folder option control panel.Am I missing a driver? What does this mean. I can find the folder option control panel, but what do I enter in the blanks?
View 9 Replies View RelatedTo create an app path, so you can run an application in Windows Xp from the Run dialog box you need to: 1. Run regedit and go to HKLMSoftwareMicrosoftWindowsCurrentVersionApp Paths2. Create a new key with the what ever you want to use as your run command, ie HKLMSoftwareMicrosoftWindowsCurrentVersionApp Pathswhatever.exe3. In the key folder that you created, create a new string, call it 'Path' and modify the value to point the specific folder of your executable your running. ie C:ProgramFileswhatever4. Use the default string and modify it's value to point to the executable you want to run.
View 9 Replies View RelatedI want to partition my new hard drive. Its external. OS is windows XP. I had a look on the net and it looks simple, go to disk management and right click on the drive you want to partition and select 'new partition' This is the problem, i dont have the option to create a new partition. I have formatted my drive to NTFS and there is no data on it. It currently shows one partition the whole size of the drive.
View 5 Replies View RelatedHow do I create a boot disc for WindowsXP SP2 in case of problems or is there one already on the software discs?
View 2 Replies View RelatedAs per advice received here, I would like to create a Recovery CD including SP2 and all more recent updates received from Microsoft. However, it appears that you may not be able to do so unless you have an XP Operating System CD. Most computers come without such a creature unfortunately and neither of my systems have them.
Is it possible to create such a Recovery disk using the OS Recovery CD which came with my Compaq/HP laptop?Or else, is it possible to copy just the SP2 plus all other Microsoft downloads without having to manually execute each and every file?