When I try to install my new HP-1040i multi-format dvd writer I get the following message when I go to my device driver.Windows cannot start this hardware device because its configuration information is incomplete or damaged.I am using windows xp on a fairly outdated pentium system. I took the writer to a friend's personal computer and it installed fine. Do I have any options short of reformatting and re-installing windows?
View 6 RepliesI have an AMD 2.1 athlon, i try and re-install my C-MEDIA AC97 Audio Device, i dont have the CD and i dont know how to fix this
View 1 Replies View RelatedI've been using a Buslink 40G disk-to-go for about 2 years and love it. Today I plugged it into the USB port and the drive did not display. I've searched forums half the night since this drive contains financial data that hasn't been backed up for a month (yes, bad practice, I know) and I need to get it working. I've uninstalled, reinstalled, updated drivers, removed and reinstalled drivers, rolled back drivers and tried everything short of bios changes I've seen recommended.
View 1 Replies View RelatedAlright guy's I have searched the forums, but haven't found the exact same problem I am having. Please help if possible. Upon start-up I get a stop device error, but it does not tell me for what. I have looked at device manager, but everything looks ok. See attachment for print screen of the start menu for programs installed. STOP DEVICE This application will not run in this Operating System.
View 1 Replies View RelatedI am still having a recurring problem with my Realtek Audio Device. This is not a new installation and no other new hardware has been installed on the computer (Win Xp Home, SP2). No conflicts are shown. I fear that some files may have become corrupted but this is one behaviour which constantly recurs - maybe someone has a fix or knows what files I need to replace.When I start up the computer, there is no volume icon, no sound and device manager shows the audio device as unable to start, code 10. All the codecs etc other things under sounds are OK.If I choose to uninstall it, then run add hardware wizard, it will reinstall it no problems and the sound comes back. But next boot up it's gone again.In case of not having read previous post, I suspect some corruption occurred when I had to cold shutdown my computer.
I obviously have the correct drivers on the computer & can load them through hardware wizard - I just don't know why they don't stick on shutdown - it's as if the function which registers the entry in the register is corrupt - I know there are certain files which can be installed or uninstalled from the registry in order to start or stop a service.is it something like this I need to do?
I just got a Prolific PL2303 USB-to-serial adapter cable. I went to Prolific's web site for the most recent driver (v. 130) and it installed successfully. Now when I look in Device Manager, there's a "Prolific USB-to-Serial Comm Port," but it isn't functioning. When I look under properties, the error message says, "This device cannot start. (Code 10)"I have Windows XP Media Center Edition with Service Pack 2. I've made the rounds of some different forums, but most of the people who have had problems with this adapter seem to have issues when using it with Vista or 7
View 3 Replies View RelatedI just transferred my old hard disks to my new computer and windows xp will not start. Windows 98 starts in the safe mode but when i try to start the normal mode iget an error stating "While initialiazing device NDIS: Windows protection error. you need to restart your computer"
View 1 Replies View RelatedEvery so often, when I start my computer, the graphics controller does not register correctly and my computer loads some default monitor controller and gives this error that's in the Subject heading. The font turns huge and annoying. I've reloaded, updated, deleted, changed, etc. to the graphics controller. Nothing cures it, except, I was able to do a restore and get it to load correctly. Sometimes it would take a couple of times to do this. Right now, it's on it's 5th time and I'm getting annoyed. It's not working. Does anyone know what I'm talking about?
View 3 Replies View Relatedi just got this audio capture device for xmas and i plugged it into the wall then i plugged the usb into my computer. my computer instantly froze then shut off. so i unplugged the device and turned my computer back on. it started booting up fine but then froze and shut itself off. now when i turn it on it sounds like it boots up normal but nothing comes up on the screen. also, when the computer is off, but plugged in, there is a red light on the cd drive and a red light on the keyboard. i think something shorted out but there is no sign of damage on the mobo or ram. im hoping its just the psu, but i really have no idea. here are the complete specs:
View 2 Replies View RelatedInsert any USB device to this computer, Computer keeps restarting and it wont stop doing that until I remove the usb device. I tried with all the usb ports on this computer and problem is the same. Even by hooking up a usb keyboard or mouse, computer wont get to the login screen. it keeps on restarting. It wont even go into 'safe mode'.Anyone have any clue whats going on and the solution to fix it?
View 2 Replies View RelatedI have installed a targus 7 port powered USB HUB on my computer. Device manager reports unknown device. I have deleted and it restalled the drived after the system rebooted. Device manager still saying unknown device. Their is not driver needed according to the manufacture. When the PC is booting it does see the IPOD mini and the Flash drive. But once the PC is fully out and login and I look a the device manager is still reporting unlnown device error (code 10).
View 1 Replies View RelatedI had some trouble last night and today with getting rid of a virus. Now that it is gone, I am having sound problems (maybe related, maybe not). This morning, when I opened iTunes I got a message that there was no audio device detected. After trying several things, I rebooted. Magically, I could play music again. However, a short while later, I again got an error message telling me that there is no audio device found, even though it shows up in Device Manager as working properly. The problem goes away for a short time after I reboot, but returns. It is Realtek AC 97. Why won't my computer keep recognizing it? (It tried going to Realtek's site to download an update. It has updates for Windows 98, 95, etc., but not for XP. Or at least I couldn't find it.)
View 6 Replies View RelatedRunning Windows XP on Emachines ET1161-07. Installed all drivers that I could find, since EMachines does not represent XP. Tried Realtek audio and HD audio, tried Intel, didn't work. Tried NVidia, as it has an NVidia motherboard. Spent too much time on this computer. Can anyone lend a hand? I know it's got something to do with Audio, as there's no audio device detected in Sounds, under Control Panel.Customer has to have computer today.
View 10 Replies View RelatedI gotta a XP Home SP2 Machine was running fine then on boot up sound device not found. went to device mng and no items displayed. System restore had been didabled and Norton disabled as well. Done a spyware scan pull nout so did virus
View 3 Replies View RelatedI had this problem last time when I fresh installed Windows XP Pro on my computer. I don't know the time, but it happens at least 30 days after I reinstall the OS and software. Today, my computer prompted me to install drivers for a PCI Input Device, but I haven't installed any new hardware for months. Basically, I haven't touched the inside of my computer for that long. So why is Device Manager prompting me to install this mystery device? Hardware ID shows that it is from vendor 1102, which is Creative, and I have an Audigy 1. Also, my FireWire port is Code 10, the device cannot start. So I'm thinking the mystery device is the same firewire port. But why show up as a separate device? I tried removing the devices and restarting the computer, but they return to haunt me again. The device properties for the PCI Input Device says PCI SLOT 7, AND I DONT HAVE A 7th slot! Can someone help me, please? Device manager shows my 1394 Net Adapter with a yellow exclamation, and it has code 10, device cannot start. There is an unknown device, the PCI Input Device, which doesn't allow me to install any drivers for it, yet it has the creative Vendor ID 1102. It shows itself as being PCI Slot 7.
View 3 Replies View RelatedI have a feeling that this is simply a case of some registry settings which need adding/modifying/deleting but exactly which ones and what values I do not know. No, I haven't tried re-installing XP.
View 3 Replies View RelatedThe system seems to be very stable at this point in time. I run Norton Utilities and other maintenance sw as well as have a firewall/pest remover/anti-virus. Behavior - most things work fine on the USB ports, either the hub or direct connects. One digital camera will only work when direct connected(not thru the hub). I have a scanner that will only work on a 2003 Compaq Presario, but not on the whitebox on any port. Also, I have had two devices that won't work at all. I have noticed that the USB mass storage device icon doesn't seem to be present now when I attach a flash drive. This is recent behavior and doesn't predate every USB problem.
View 4 Replies View RelatedLast night I installed ATiTool 0.24 over my 0.25 version (stupidly). I also did a BIOS update and installed Cat6.3 and then AVIVO converter. When I rebooted, I had this new PCI device requiring a driver,but it's an unknown device and doing an auto update helped me.I can't get rid of this pesky PCI device (tried uninstalling but Windows detects it again after restart/boot-up). All my stuff is working, so I don't know where this critter came from?
View 1 Replies View RelatedI have a huge problem with two unknown devices in my "Device Manager" after formating and reinstalling fresh copy of Win Xp Pro.In my "Device Manager" there is two lines with Unknown devices.
View 10 Replies View RelatedI'm using XP SP3 Home Gateway desktop My device Manager has nothing in it. I don't know when it quit showing. I have checked Bios plug&Play, and it is set in Auto. I am also getting an error stating my recovery D: is running out of disk space.
View 2 Replies View RelatedMy computer cannot detect any cd's in my DVD or CD drive. When I open Device Manager the CD/DVD devices have an error. This error: Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41) Click Troubleshoot to start the troubleshooter for this device.When I run the DriverScan it simply doesn't even have an entry for the drives, probably since it thinks it doesn't even exist at the moment.
View 5 Replies View RelatedAnyone know how I can rename a device in device manager, (or the registry), so it doesn't show #2 after the device.I used the leadtek driver uninstall tool last night. And it removed the drivers I had for this Leadtek Deluxe tuner alright.BUT it also renamed my onboard Gigabit LAN (onboard) to #2 my scanner to #2,
and removed my Nvidia drivers for the video card.And reverted the videocard drivers to MS Nvidia drivers.I managed to fix the scanner entry by uninstalling the drivers, then rebooting and reinstalling the drivers.And I managed to fix the videocard drivers, by reinstalling the Nvidia drivers.So, yup, anyone have any idea how I can change the board LAN, so it doesnt have #2 after it? sing XP Pro SP2
the other day I tried to insert my friends usb into one of the frontal usb ports, it said it couldn't recognize the device or that it had malfunctioned. From that point on, Anything connected to the pc via the usb won't be recognized. everything else on the pc works fine, so theirs either some really easy way of fixing this or i need to buy a new motherboard/serial bus.
View 1 Replies View RelatedI bought a WD Passport 160gb. and it worked fine I left it running on my computer for 2 weeks and now its not working error (USB Device does not recognize device) so I thought I broke it, I went out and bought another one and I am getting the same error with the new one and old one, on mulit computers that it worked on in the past, I even tried in on new computers.
View 37 Replies View RelatedThis has happened several times and I don't know how to correct it, if anyone has a suggestion please let me know. When I uninstall. unplug and remove drivers, for a USB device (web cam) and then reinstall it later Windows says it #2 or #3 or #4 but there is no other device. Why does it name it that way and how can I make it install as just that device.This has also happened when I installed a replacement NIC card.I hope someone understands what I am trying to explain.
View 1 Replies View RelatedI haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
View 9 Replies View RelatedI recieved the following message after a forced restart after windows updates were installed: "We are sorry for any inconvenience but Windows was unable to start successfully" My options are to start in Safe Mode , Last known config or normal. Safe Mode is the only thing that works. Also System Restore would not work Also System Recovery from Sony Vaio Recovery Wizard would not work
View 8 Replies View RelatedI have a Dell PC 8250 and over the past two yrs I have managed somehow to increase my start-up time by inadvertently adding to my start-up file. I understand that there is a way to eliminate items in the start-up file but having been to the site, I cannot determine which items to delete without messing up my system. Please advise, and maybe tell me what the basic start up should look like.
View 6 Replies View RelatedMy old system hasn't been powered on for about a year. Problem was the onboard video failed replaced it with a video card from another system (riva TNT) and bought some memory system wouldn't boot, determined that the memory was bad Now the system booted but win2K wouldn't work. No problem I have XP now. After multiple error during the xp install I finally got through it.only the computer will only boot in safe mode. Initially thought it was a hardare conflict so I booted in safe mode with networking and systematically cleared all the yellow.
View 10 Replies View RelatedIn a not updated Version of Windows XP you can run (Start-run) "start"command at the Run dialog just typing it, when you update windows andwrite the same "start" into Run dialog Windows shows a error message >Windows cannot find `start`. Make sure you typed the name correctly,and then try again. To search for the file, click the Start button, andthen click Search.If you are in CMD the `start` command works fine but the problem is thein Run dialog windows doesn’t recognize it ?
View 1 Replies View RelatedIt never would start windows normal but would in safe mode,so now i did a diskcheck and restarted now it gets hung up on the system32driversagp440.sys...at least thats the last one that pops up before it freezes.
View 4 Replies View Related