My computer keeps switching itself to standby on its own after 20-30 minutes. This is a problem as I do alot of DVD back ups so it ends up stopping the software I use meaning I cant do any back ups whatsoever.
I have checked in my power settings and it is supposed to be set to always on, so have no idea why this is happining.
The computer is pretty much brand new from Dell so maybe it is some factory setting.
When I finish using my PC and click on start then standby I get the following message: "The devise driver for the ATI technologies, inc 3D rage PROagp 2X" devise is preventing the machine from entering standby. Please close all applications and try again. If the problem persists, you may need to update the driver".
Clicking OK and trying again gets the same message.
my pc is just suddenly switching off just like that and i suspect it could be a virus.but now the problem is if i when to run an antivirus it switches off before the scan is complete. how i can remove the virus that is if it is a virus.
View 10 Replies View RelatedEverytime I try to switch between a user in XP pro without logging off my computer slows to a crawl. I would have to hit the reset button and restart. It runs pretty quick otherwise. It has a 120 gb harddrive, 256 mb of ram and a atlon processor 3100+. Has anybody experience this before. Any ideas would be greatly appreciated.
View 3 Replies View RelatedFirst of all, after clicking "shut down" my computer would go to a screen labeled "It is now safe to shut down your computer." I have encountered this before, and I went to turn on APM in power settings. However, I can no longer go to stand by anymore
View 6 Replies View RelatedI run xp and have a HP Pavilion 9600. I've never used stand by before, but I have a standby key on my keyboard that my 11 month old son convenantly hits everytime I am online. I've tried hitting return, space, esc, and so forth but nothing brings it out, and I have to do a cold shut down.
View 1 Replies View RelatedWhenever I try to enter Standby mode...either by clicking the menu button or closing my laptop lid... my PC freezes
The monitor turns off but that's as far as it gets...I then have to tuen it off manually and reboot everything.
Usually when this happens, the fan continues to run at high speed until I turn power off
I run XP and recently have been unable to keep my pc in standby mode...........it goes into it for a few seconds then pops out again
View 3 Replies View RelatedI have windows xp installed on my computer, the home edition. packet 2, Anyway, I have been trying to get my computer to go to stand by but it keeps telling me. system standby failed, the device driver for the standar 101/102 key or microsoft natural ps/2 keyboard device is preventing the machine from entering standby. Please close all applications and try again. If the problem persists, you may need to update this driver. I tried to update the driver, but for this basic key board there is not a driver to update. It is the microsoft natural keyboard elite. Nothing special about this at all. Other than that my computer is about 5 years old and had windows 98 second edition on it, but would go into stand by then, but now that I have put XP on it, it will not go to stand by.
View 2 Replies View RelatedI recently installed SP3 and IE8 along with all updates. All went well except now Hibernate and Standby often kill the system including the cursor. If I boot and try Hibernate or Standby it usually works, but if I run for a while and try them they hang the system. The problem did not exist before I installed SP3 and IE8.
View 5 Replies View RelatedI just installed a new graphics card BFG 6200 G force. My system will no longer come out of standby mode, i have to reboot. I tryed disabling power mangement function in my bios but my PC wont boot unless they are enabled.
View 2 Replies View Relatedwhen i install xp operating system iam not able to enable standby mode. it is disable mode. what is the problem can anyone give the solution for this.
View 1 Replies View RelatedI have a new Dell Inspiron Media version of Win XP- a Laptop I am using as a desktop replacement. It simply won't remain on Standby for longer than 10 or 12 minutes and then goes back to desktop and then in time, the screensaver.
View 4 Replies View RelatedDo you like IE7 ? I downloaded it thinking it would be better .If I decide to go back to IE6 how would I do that step by step.Do you think I should keep it ?The print type looks a lot better.
I switched on this morning and after a few minutes the screen went black. I restarted and the screen remained black. I kept swtiching on & off then is started. I did a system restore and now it seems to work OK but the colores have changed, I get a yellow background and my word page is yellow. I have tried altering settings in display to no avail. I am typing this on a yellow page and still get a yellow page in word.
View 1 Replies View RelatedI have two people (two user accounts ) using one computer. However when one wants to switch between users by going Start | Log Off there isn't any other user name to switch to and I end up shutting down the computer.
how do I configuar the computer so I can switch between users with out shutting down?
i am having a problem with my computer it keeps on switching off. I read the thread about it and i cleaned out the fan. It was clogged full of dust. In my bios, when i go to power, the the voltage meter 3.3V is at 4.08 and red. It has not changed since i cleaned it. When it first occurred it went back to normal level after i left it off for awhile. Have i got permanent damage and if so to what component would it be the power supply or the chip processor.
View 6 Replies View RelatedI have two accounts created on my computer which is running Windows XP Professional. One is the account I've been using for about 3 years, which contains all my personal information, settings, as well as 30 GB of media that is stored in the 'My Documents' folder.
The other account was created about 15 minutes ago. It contains nothing. I need to switch (if possible) all my settings, data, everything essentially; over to the new account. Is there a way to do this?
I had a Thrustmaster Dual Power 4 game pad, and bought a Logitech Rumblepad later. I like the Rumblepad better, and want to consider it my "first string" controller. But if I go into say, Nba Live 2005, and go to choose controllers, no matter what I do, the thrustmaster is on the top of the list, and the logitech is on the bottom. All the old posts talk about choosing Preferred device in the control panel. By running DxDiag, I can see that setting something as the Preferred Device assigns it Controller ID 0. But I also see that the order of the Controllers, as recognized by most games, is the same as the order listed in the game controller control panel, and is completely unrelated to which device is "controller id 0" and "preferred device." For example, I set the logitech as preferred device, and plugged in the thrustmaster and also a gamepad pro.
View 4 Replies View RelatedI have a computer that has windows XP Home. I't has some driver issues etc that cannot be fixed mainly because i do not have the disk that was used to install it. I do on the other hand have a Win2K prof. disk that i would like to install on this comp so that it can be used again. I was wondering if someone might be able to either tell me or point me in the right direction of getting this machine re-installed with the win2k op sys. i.e tutorials etc. I also do not have the bios install disk so the bios will need to remain the way it is.
View 2 Replies View RelatedI have been having problems with my computer crashing and switching itself off when I am running my Nortan Internet Security full system scan. It gets to about 8000 files scanned then it crashes and switches off. It has happened at other times today when Norton Scan has not been running as well. I sent the error report and it came back with what is written below.
You received this message because a device driver installed on your computer caused the Windows operating system to stop unexpectedly. This type of error is referred to as a "stop error." A stop error requires you to restart your computer. More information ...
When using Alt-Tab for Task Switching the menu aborts irregularly after an inconsistent amount of time rarely more than a few seconds.To re-state: I hold down Alt and then push Tab once while continuing to hold Alt. The menu comes up to show all current running programs. Then after a moment the menu exits just as if I had pushed the escape key.I have also noted that viewing the alt-text when doing a mouse-over on an image in my web browser is interrupted similarly.I have run my virus checker and Ad-Aware and found nothing. I have also tried closing all programs: no effect. I have also tried ending all non-essential processes through Task Manager: No effectI am running: Windows XP Home on a Dell Inspiron 1501
View 10 Replies View RelatedWhen I Switch users to logg on another account but still keep the previous one logged on, the other account I logg in after I switch users, the computer works really slow. Only after I switch users. It didn't do that before. Why is it slow?
View 8 Replies View RelatedBoth my wife and I are admins. On my side all things run ok. When my wife switches to her side everything comes to the screen correctly but there is no sound. No sound bits, wav., game sounds. I have checked all the places that I know and it looks like everything is ok.I do not know how to fix this problem, but I'm sure someong out there might be able to help me. I sure hope so. I will be waiting for your solution
View 3 Replies View RelatedWhat a pain. It says that upgrading from windows 2000 to XP home is not supported and when I go to reformat, it doesnt allow me to reformat the "partitioned space". It gives me no other option than to install XP on the same partition as Windows 2000, and then tells me it isn't advisable to do it. Whats up with that, and how do I get rid of 2000 so I can properly install XP home?I've unfortunately got XP partially installed, and when I reboot it will go to the black screen... but then asks do I want to start up with xp or 2000, so I start with 2000 and, well, frankly I am sick of this and just want it to install.If I'm going to screw around with this all the time, trying to keep these dang computers functioning, then I really need to take some classes, sheesh.
View 6 Replies View RelatedThis problem seemed to coincide with a new monitor. I had changed some of the services, but Terminal Services and Fast User Switching are set to manual and have started. The option to switch user in the control panel is ticked. When I go to switch user from the welcome screen, the other user begins to load and then flashes back to the welcome screen
View 1 Replies View RelatedHow do i switch off all the flash animations of my fire fox1.5 browser? How do i switch off the flash plugin at all? How do i stop a fresh fire fox installation from popping up messages like, this page requires additional plugins.
View 8 Replies View RelatedH button keeps switching focus. what to do?
View 14 Replies View RelatedWhen switching between dual and single monitors, how do you save the positioning of the monitors so I do not have to reorient the two monitors under display properties settings?
View 2 Replies View RelatedWhich window I want to be active. By that I mean if I have two windows open I can't switch between them by clicking on the appropriate window. Instead I have to use alt-tab to do it. If I only have one window open and wish to de-select it as the active window I have to use the windows key to open the start menu clicking on start does nothing, I can only interact with the active window.
View 5 Replies View RelatedI have a fijitsu siemens PC running windows XP home (SP2), I have 2.4ghz CPU, 80G HD and 750 MB of memory. Whilst running for me as the administrator it is slowish but I can live with that. However, when my wife uses "switch user" her "section" once opened runs VERY slowly. Coupled to this when I switch back (even if she logs off) it crashes, I get a message when checking events that her part of the registry was still in use? Is there any way around this it is very irritating especaily her "section" running so blasted slowly
View 5 Replies View Related