My other laptop will not start up at all. I have Windows XP. When I turn it on, this message displays on a black screen:Windows could not start because the following file is missing or currupt:system32DRIVERSisapnp.sysYou can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM.
View 8 RepliesI start up my laptop with the screen closed. When I open the screen I see the XP login screen for a second and then the computer goes black. I can't do anything else.I have Windows XP Home with the service pack 2 (I regret installing it).I never had any problems before. If you know how to fix this let me know.
View 6 Replies View Related1. I get the usual memory and bios messages
2. The XP screen with the scrolling lights appears
3. The screen becomes black and the cursor appears. The cursor can be moved all over the place just like normal, but there is nothing else visible.
4. After a long period (minutes), the screen becomes blue (dark band at top and bottom) and displays the Windows XP logo. XP infomrs me that "Windows is starting up". The cursor shows a CD next to it. This is as far as I've gotten.
i have a really annoying problem. my computer works fine but when left for a hour the screen goes black and the monitor revives no signal. the only way to get it back on is to switch the power button on and off. then windows says it was shut down wrongly and i have to go through a process of safe mode then start normally and las known config. there is no screen saver set and its windows xp pro any ideas before i chuck it out of the window
View 7 Replies View RelatedI had put my pc off with the on/off button, because I was in a hurry. Later when I tried to open it, it shows the BIOS screen and than nothing happens it just turns black and thats it. And it goes off when I put my finger slowly on the on/off button.
View 12 Replies View Relatedi had a computer which had a pretty bad visus on it. i think i got the virus out but now it wont start.I tried to do a repair of windows with what i thought was the disc for the pc, turns out it was a different xp version than the one on the pc.
So how i have the original corrupted windows, and the repair version of xp on the machine. Both of which will not even run.Its really important that i get the data of the pc, that was the whole point of what i am doing. the computer starts, then said it didnt load, i choose how i want to start the pc, safe mode...etc and then it freezes.Sometimes it just goes straight to a black screen, and i can no longer get it to boot from the windows disc.
(spoiler alert: this is a long story computer specs:mainboard: msi i875p chipset sata I supported, onboard lan, agp&pci slots.cpu:intel p IV 3.06 ghz HT (single core)vga I : sapphire ati radeon x1950gt 256mb 256bit gddr3 agp8x vga II: his ati radeon 9250 something hdd I: seagate 120gb sata I hdd II: samsung 200gb sata I
hdd III: wd 250gb sata I rams: 2gb(4*512mb) kingston ddr I pc3200(400mhz)psu : fsp epsion 700w psupsu II: stock 350w psu(came with case, never used it)
os: windows xp pro eng sp3 retail version (unattended)
my computer would give me a few problems while booting up. I would start the computer, it would run through BIOS, run through the Windows loading screen, and after that it would run the CHKDSK to make sure my disks are fine. CHKDSK doesn't work, it just freezes right before checking the disks, so I restart and generally it will boot up. Most of the time it would boot up perfectly, but rarely would it go to the xp loading screen and then flicker as if it as going to go to the windows login screen but wouldn't. The screen would just stay black and I'd have to restart.
Next time, generally it would work perfect.So this brings me to the current day. After the windows xp loading screen, it goes black. The computer is on, but I don't see any activity for the HDD via the LED. SO i go into safe mode, i finally get CHKDSK to run, I had to really mess with some stuff to get that working. Windows says the volume is fine, and the only way I can boot my PC is in safe mode, but even that will freeze sometimes while loading some of the files.
My main pc is stuck in a boot cycle giving me the black screen with options to start in safe mode etc etc and when selecting one of those options it reboots to the same point. When I press return the system tries to start it attempts it, clicks then goes back to boot cycle. The Windows XP system disk won't cut in like it should so I cannot gain control of the pc.
System is a Dell, 2years old and has had various viruses despite having the usual protection. I am currently using my old trusty Advent Pentium 3 for this message (which has never had the same degree of virus prob's curiously). After the first virus Dell talked me through using Ghost - brilliant. Within a couple of days it was hit again and usinng Spybot got rid of the virus but PC kept displaying the message rundll.dll file damaged. So I used XP Recovery seemingly with no problem only to find it won't reboot.
After my computer is on for approx 15 min. the screen goes black. After I reset/reboot it comes on and runs ok the rest of the day.The next morning when I turn it on it's the same thing to do over.I've run all my virus programs and can't find anything.the computer power indicator never goes out. I push the switch to reset, computer comes on and runs normally the rest of day.Looks like I still have a virus/bug somewhere.
View 9 Replies View RelatedI have a Dell Dimension 8400 Desktop computer and whenever I start the computer up it goes to a blank black screen with a flashing bar in the top left hand corner. Usually it does this for a second and then continues to load but it jus stops there and the computer isn't working or anything.
View 1 Replies View RelatedI have a friend who is using windows xp.When they boot the computer up.They encounter a black screen with some wording.He tells me that the wording is to do with ms dos.Then the screen goes black,with just the cusor showing in the top hand left corner.
I have an idea of what the problem is,and think that someone has gone into his settings and asked the machine to boot up in dos.
When i log in everything loads like its going to work but then after the last thing loads it goes to a black screen and you can't do nothing, but you can sign in on safe mode, have any idea of what to do in safe mode to fix it???
View 1 Replies View RelatedI do something wrong. lately my screen has been going black plus startup is not completing, having to restart startup 3 or 4 times, also lately the computer has been running at a crawl.
View 3 Replies View RelatedReally don't know where to post this, so forgive any inappropriate posting.I'm running Windows XP Home, SP2 all updates current.My problem is that my computer has just been freezing up and the screen going black for no reason I can figure. I've checked "sleep" and "hibernate" settings, and they all seem to be off. I've instructed the computer to NEVER go to sleep.At first, I had the problem which I thought may have been linked to my newly-purchased & registered version of AVG AntiVirus, but then I took everything out of System Start-up EXCEPT for that, changed the time for daily update and it seemed to fix things. Then the other day, I installed Kodak's Easy Share software for my new digital camera, and the problem started again. Suspecting the software,
I uninstalled that just this morning, and restarted the computer after the uninstall. After that, my mouse would no long choose just a single selection of anything no matter how much I clicked, it would choose multiple selections. So, I rebooted.Seems fine now BUT I am leary, and of course, I have to reinstall the camera software in order to be able to transfer the pictures.
I have Microsoft Windows XP and once I turn it on it appears as it is restarting but as soon as it starts up after the black screen that says Microsoft Windows XP the screen goes black and says monitor going to sleep and then it restarts over and over and over!
View 5 Replies View RelatedI have a Compaq laptop with windows XP about 5+ years old. Windows locked up a week ago so I had to cold stop the computer. After I restarted it, it did it again. I'm unable to remove any programs because the screen goes black and it freezes. I went to microsoft to check for up dates and it recommended an update. I can't install the update because it freezes and locks up, screen goes black so I the only option I have is to shut it down and try again. I've also noticed that if I leave it setting for a while, it normally goes into sleep mode.
View 3 Replies View RelatedA few weeks ago i had a problem with my computer where it would boot up until the XP logo with the blue scrolling bar, where it would freeze. I tried everything until i had no other choice but to format and re-install windows. Since this my computer has been very slow starting and increasingly so over the past week or so. After a defrag a couple of days ago it has pretty much gone haywire.I repeatedly got explorer error messages followed by dr watson debugger errors. Other problems include seemingly random restarts and general slowness after booting. Upon starting it this morning, it gets past the xp logo but then just displays a black screen. If i press space it asks me to select a hardware profile but this just does the same as previously mentioned. Also the hard drive light on the case is on constantly, as if to indicate that it is doing something.
I cannot boot into safe mode, as the system freezes at 'Mup.sys'. There is not much that i can do seeing as i can't get into windows. I also do not own a windows xp cd as my computer is a HP and did not come with an xp disk. i do however have a copy of their recovery disk, but i want to avoid using this as it will only wipe all my data which i do not want to lose.I am beginning to think it is the motherboard. any thoughts? temperature is at about 78 C at the moment, which sems about normal. both fans seem to be running as normal.
i just upgraded my cpu and i get a bios beep (which is just 1 long beep repeating) and nothing on my screen. i have an awardbios. had a AMD Athlon 64 3800+ Orleans 2.4GHz Socket AM2 62W Processor but upgraded to AMD Athlon 64 X2 6400+ Windsor 3.2GHz 2 x 1MB L2 Cache Socket AM2 Processor i have a DFI INFINITY NF ULTRAII-M2 AM2 NVIDIA nForce4 Ultra ATX AMD Motherboard Patriot 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 667 COOLER MASTER Real Power RS-450-ACLX ATX12V 450W Power Supply MSI NX8800Ultra-T2D768E-HD-OC GeForce 8800Ultra 768MB Video Card
View 14 Replies View RelatedOkay so my computer became unresponsive while browsing the internet multiple tabs. So i was forced to turn it off by pressing the button on the computer. Then when i went to turn it on it will display the sony vaio screen, then the intell pentium processor screen(normal for booth up, both of those), but then it just goes blank.
View 8 Replies View RelatedI just bought a new hard drive for my computer because with the old one I was having problems with creating a new partition and installing XP... so I figured the Hard Drive itself was the problem. Anyways, I have the new drive hooked up, I run windows XP setup and it loads all of the files. It finishes and says "setup is starting windows" after this my screen goes black, the computer restarts and the cycle repeats.
View 12 Replies View Relatedi bought the new game, Lord of the Rings Online. Works and installs perfectly however, because i have a weak connection sometimes an error message comes up saying you have lost connection, so i would keep trying untill i manage to get onto the game successfuly. Then i would get another problem which i am sure it is to do with my graphics card. As i am loading the game and enjoying the introduction video, my computer screen would go black and a message would appear saying 'No Signal' with the computer still running. So after seeing this message i would assume to restart the computer, there is no other way of getting it back to the desktop. I did this quite a few times maybe about 6times. After pressing the restart button for the last time
View 14 Replies View RelatedAfter a hard disk crash I replaced the disk and did a clean install of Windows XP. Now when I do a Shut DOwn, the operating system will shut down and I get a black screen but the actual machine will no longer power off.I have not changed anything in the bios but cannot find out what the problem is. Can anyone help?
View 2 Replies View RelatedJust switched of pc,Switched it back on and I get a page with,safe mode etc and to choose a setting.Which ever setting I pick the computer goes to the widows xp window then goes back to the black screen then to the xp startup screen again.It does this all the time.It was all working well until switching off.I am on laptop now as unable to access pc.
View 2 Replies View RelatedThis computer had win98 SE, it kept dying, the screen would go black, but the computer was still running. Had to reboot several times before it would load windows again. It seemed it would do that when the computer was running a while. I checked the processor fan and it is working. I finally decided to reformat and load XP Exeutive. It loaded fine, but when I go to do windows updates, it freezes and gave me errors # OX8024402C and OX80072EE2. Then it will just die again, Screen goes black, nothing there, but you can hear the computer box still running. I don't know what else to check.
View 2 Replies View Relatedwhen I boot the computer it comes up with a black screen , white lettering and it says select startup system to start there are 2 choices ( help and Microsoft windows XP ) and there is a timer counting down allowing me 30 seconds to make a choice using the arrow keysIf I select windows XP the computer goes through the boot sequence and windows starts.If I let it time out or select the "help" It takes me to a second screen that has several options
View 12 Replies View RelatedI cannot start up XP. When I do a black screen comes up to try and boot up in other modes,( safe, normal, with previous configuration etc). None works. I went to BIOS message and it states an IDE driver for Fasttrack is missing/ not connected?
View 8 Replies View RelatedI download, installed and restarted XP after installing SP2 fine. I then logged back onto windows update to install remaining updates.they were downloaded and installing when I left. I expected the computer to need to be rebooted and would be fine when updates have finished. Got a text message later this evening from sister saying that all the computer does now is having a black screen? What has gone wrong? How can I solve it? We are running xp home edition on a machines PC.
View 1 Replies View RelatedI have a Compaq Presario 5320 US, XP Pro, 768 MB Ram 1.5 GHz CPU. It works fine until I shut it down. Then I get a Black Windows screen that says "It is now safe to turn off your computer" I have updated the bios. Anyway to fix this so I don't have to manually press the button to power it off at that point?
View 5 Replies View RelatedI push the power button on the modem and it's fine... right after the screen does the Windows XP with the loading bar at the bottom screen it turns black and I even left it on for like 10 minutes and it still wont work. I also tried to start windows in SAFE MODE and LAST GOOD CONFIGURATION plus many others, but it wont work. I still have valuable information in the computer so,
View 2 Replies View Relatedmy windows xp home edition hung and now shows a black screen everytime i start the computer. how do i cancel installation? do i have to access and the bios, and if so how do i do this
View 2 Replies View Related