FSHLP.SYS And VMM32.VXD Corrupt
Jul 14, 2005At startup, I get a black screen that tells me that the two above files are
either damaged or corrupt. Can't load Windows in safe mode.I'm running XP with a 2.8 GHz Pentium 4, 512 MB RAM.
At startup, I get a black screen that tells me that the two above files are
either damaged or corrupt. Can't load Windows in safe mode.I'm running XP with a 2.8 GHz Pentium 4, 512 MB RAM.
I have a problem with an application starting to load and then a message coming up stating that there was a problem with the "ntdll.dll" file.
I even located a copy to download, placed that in the WindowsSystem32 folder and each time I continue to attempt to launch this application, it partially starts up, then hangs and then gives me the error message.
Is there something I am not doing correctly? Any suggestions? It had been working just fine for the past year or so and about a month ago, BOOM, this error message came up.
I am Running XP home and has a corrupt ntdll.dll. The person I am helping tried reinstalling wimdows to a different directory to bring the computer up. How to replace the nt.dll file from the initial install.
View 3 Replies View Relatedit all started when i went on my second partition which had windows vista beta 2 installed on it, well, i started fooling around and i messed something up, so, i went back into my partition 1 which had windows xp pro on it, so i went into a program on my computer called partition manager, and i deleted partition number 2, or i think i just formatted it again, not really sure, but, then i started downloading the vista beta again cuz i needed to reinstall, so then after the download finished, i restarted the computer and came across an error, windows boot manager wasnt allowing me to go into my first or 2nd partition, when i tried to go on my first partition with winxp pro, it said that ntldr.exe was corrupt, and when i tried on my 2nd, the one i supposedly formatted or deleted, it said boomgr.exe is corrupt, so what i did was installed windows xp 64 bit edition, but i am having problems booting into that as well because my monitor is blank and all it says is output signal out of range change to 1280 x 1024, so im running 64 bit edition in safe mode right now, but what i need help is booting into my winxp pro partition
View 1 Replies View RelatedToday while booting up my computer I was came across a serious problem. Each time my computer begins to boot up It comes to a black screen saying: Windows could not start because the following file is missing or corrupt:system32driverspci.sys I have no idea how this problem occured. My computer has been running fine and this is the first time ive ever encountered a problem like this. Problem is after I hit R to repair and it goes to the black screen with just C prompt
View 2 Replies View Relatedmy dvd-rom driver is corrupt or missing (error code 39) apparently!ive tried system restore but it cant be restored and ive tryed troubleshooting but this didnt work, ive tryed uninstalling the device but now it cant be reinstalled so what can i do? i keep going round in circles.
View 3 Replies View RelatedI am running a dell Dimension 4600 that came with windows XP installed from the begining. XP worked fine with no problems at all. All this changed however when i installed Windows 2000 prfessional. It was installed on the same hard drive and on the same partition to XP. Windows 2000 runs without any problems but now i want to remove it. Windows XP now fails to boot if picked from the boot options. Here is the error
"Windows 2000 could not start because the following file is missing or corrupt: Windowssystem32configsystemd Startup options for windows 2000, press F8.You can attemp to repair this file by starting windows 2000 setup using the original setup floppy disk of CD-Rom. Select `r` at the first screen to repair. "
Win XP Pro, unknown SP. The computer belongs to a friend, Jo. Someone cloned Pat's HDD to an identical HDD, IDE, Western Digital. Upon boot, Jo was greeted with c:windowssystem32configsystem is corrupt. Problem onset after someone the cloning. As far as Jo knows, the source / original HDD was working fine prior to the clone.
copy c:windowssystem32configsystem c:windows mpsystem.bak
copy c:windowssystem32configsoftware c:windows mpsoftware.bak
copy c:windowssystem32configsam c:windows mpsam.bak
copy c:windowssystem32configsecurity c:windows mpsecurity.bak.........
I've had the familiar hal.dll missing or corrupt on starting XP SP1 on a mainboard NameMSI KM2M Combo (MS-6738).All I did was to take out the 1 Gig of SDRAM I've used OK for months and fit a new 1 Gig DDR module. A year or two back I had STOP errors through merely changing a RAM module, the simplest upgrade usually, so I kept switching RAM until it went with no STOPs. I resent having to reinstall an OS for a five-minute RAM refit! Obviously the hal error is caused by the new DDR module, since I'm now using the old SDRAM. Is there a way around this apart from the dreaded reinstall of OS? In the rare event the DDR could be faulty does anyone know a non-windows DDR test utility please?
View 6 Replies View RelatedMy PC with recently installed XP Home will not recognize the cd-rom drive anymore (after a system error from trying to install a sound card driver).I tried doing an uninstall, reboot, reinstall, update driver, etc nothing works! It always comes up with something about not finding suitable drivers for this device.Is there any easy way to get the drivers back again? I only have a single Windows XP Home cd which is meant to be installed on a new Dell PC, but worked ok with my somewhat generic PC. Someone told me it was just a recovery cd, but it did the full installation.
View 6 Replies View RelatedI have an OEM copy of WinXP Pro. I got it in 2002 so long before SP2. Anyways, I'm trying to reinstall Windows due to some problems I'm having and it's saying one of the files on the disk is corrupt. It required me to abort the installation before it even started and I didn't bother to write down what the offending file was because I believed it.I've treated the CD poorly and I wouldn't have been surprised if the drive couldn't read it at all. Basically I'm wondering if I have any options for getting a new CD cheaply since I already own one or if I just need to go buy a new copy of Windows XP? Thanks.
View 9 Replies View RelatedI was smart enough to execute a file i THOUGHT was a .jpg, but it was in fact a shortcut (lnk).The file executed a large amount of commands in dos, and it took me about 1.5 seconds to close the program. I later found out that this "virus" was designed to delete system files from my system32-folder I don't know how much damage the execution did to my computer, but here's my question Is it possible to check if my version of WinXP is still "intact" or corrupt, if any important files really were deleted (without in fact rebooting)? I just want to find out if it is safe to reboot, so I don't need to backup my files and reinstall. I think win982000 had some kind of Systemcheck-tool, but I haven't heard of such a tool in WinXP
View 2 Replies View Relatedmy operating system is corrupt and i think my restore disks are bad too. how do i tell if they are and what can i do about it?
View 9 Replies View Relatedwhen accessing any application or programme from my hard drive I get the following error message "The file or directory c: is corrupt and unreadable. Please run chkdsk utility." I then click to get rid of the error message and the utility works fine. I have run chkdsk several times but it does not shift this error message.
View 2 Replies View RelatedI restarted my computer today and right after it started booting from my C: drive, an error came up that said something like "Windows cannot find the file C:windowssystem32tfs.sys because it is missing or corrupted." It suggests that I use the recovery disk to fix it, but I don't have the recovery disk, so I'm kind of in trouble. Luckily, I had some Linux LiveCDs laying around, so I used one to boot up my system.I think that this might have something to do with me trying to change my boot screen, but I didn't mess with that particular file, so I'm not sure. Also, I haven't done anything to the RAM lately.
View 9 Replies View RelatedI am trying to reload windows XP on a computer it has become corrupt and when I did I received this message. Can anyone tell me why and how to resolve it?
View 2 Replies View RelatedMinutes ago I attempted to copy my HDD to another HDD. And I got this message: "Could not copy the file NxFsMon." It IS an XP system driver.Now, I don't know for a fact that this file is corrupt. But let's assume that it is. In which case deleting it and replacing it would, one would think, be a logical approach to the problem. (I fear such an assumption does not always apply in dealing with computers.). Assuming, of course, the file is on the CD. But it's in System32, so would that not be a fair assumption?If the file is corrupt, then there's an XP Repair install or a clean install option. But tell me, could not a copy of the file be taken from the XP CD and used to replace the same file on the HDD. It would seem a quick and much easier solutionthan a repair or clean install.
View 6 Replies View RelatedMy PC always reboot... anyway, when trying to reformat or to repair, this error found "INF file txtsetup.sif is corrrupt or missing, status 4096. Setup cannot continue.Press any key to exit." is this a virus? im using OS (windows xp sp2). Is there a way to retrieve my files using repair? because i have a lot of files there.
View 2 Replies View Relatedmy existing W2K Pro has become corrupt and needs to be reinstalled. I have the original disk but I use the 4-floppy boot set instead. Tried to do reinstall without fdisking first and all that resulted was a blue screen. Should I clean-up the drive completely first with an fdisk then do a reinstall? If yes, what would be the best way to initiate the fdisk procedure?
View 2 Replies View RelatedThis is not your typical Hal.dll file is missing or corrupt. I've tried all the fixes, and am getting nowhere. This is a Windows XP Pro install.I tried chkdsk /R in the Windows XP Recovery Console first, and while it did complete, it reported that "the disk contains one or more unrecoverable problems." I also should note that Recovery Console did not ask me to identify the windows install, nor did it ask me to enter the Administrator password.Next, I tried bootcfg /rebuild and got "Error: failed to successfully scan disks for windows installations. This error may be caused by a corrut file system, which could prevent bootcfg from scanning.Use chkdsk to detact any errors."
View 1 Replies View RelatedI will try to explain as well as I can. My friend has been having some slight computer problems lately so I went over to take a look. The first problem that the screen would get a lot of jibberish on it. Pixels or what ever. I tried a new cable and uninstalled and reinstalled the driver and no go. I installed a new driver and the same. Finally I tried a new video card and it worked great. That is just the first of the problem. I then noticed that one of his hdd on his raid 1 had gone bad so I took it out and got it replaced. In the meantime when I restarted his computer it did a disc check and did some things I had never seen before but it completed the check on the good disc. All seemed to be working well until a few days ago he said that his music was doing crazy things so I went over to take another look. I played a song and it would start in the middle of the song and play a whole nother song. I would play Queen and Celine would come on but it would start in the middle of one of her songs. Not all the songs are like that though. We never did count but I would venture to say at least half are still good. I then just out of curiosity went to his pictures and they also had problems. A couple of them would show up and the others would not. They still showed they had 1.6mb or 2mb in each folder for the pictures but nothing would show up. He mentioned something about some power surges but he is proteced with a battery backup ups from APC. What does it sound like to you?
View 2 Replies View RelatedI will try to explain as well as I can. My friend has been having some slight computer problems lately so I went over to take a look. The first problem that the screen would get a lot of jibberish on it. Pixels or what ever. I tried a new cable and uninstalled and reinstalled the driver and no go. I installed a new driver and the same. Finally I tried a new video card and it worked great. That is just the first of the problem. I then noticed that one of his hdd on his raid 1 had gone bad so I took it out and got it replaced. In the meantime when I restarted his computer it did a disc check and did some things I had never seen before but it completed the check on the good disc. All seemed to be working well until a few days ago he said that his music was doing crazy things so I went over to take another look. I played a song and it would start in the middle of the song and play a whole nother song. I would play Queen and Celine would come on but it would start in the middle of one of her songs. Not all the songs are like that though. We never did count but I would venture to say at least half are still good. I then just out of curiosity went to his pictures and they also had problems. A couple of them would show up and the others would not. They still showed they had 1.6mb or 2mb in each folder for the pictures but nothing would show up. He mentioned something about some power surges but he is proteced with a battery backup ups from APC. What does it sound like to you?
View 2 Replies View RelatedAny way I can get one of these onto a thumbdrive from a laptop to reload into my computer?
View 3 Replies View RelatedI'm running XP Home SP2 on an IBM desktop OEM install. I think one of my kids may have delete some criticle files.i found a bunch of family jpegs and 2 cab files in the recycle bin. I restored all the files but have been having slow performance. I am unable to send large emails without getting memory errors if i try to access Device Manager i get the following error:MMC cannot open the file c:windowssystem32devmgmnt.msc. This may because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you do not have sufficient access rights to the file. I have adminstrator rights and have tried logging in as another admiinistrator. I've reinstalled SP2 but that didn't help. Short of reinstalling XP (which would be a PITA)
View 14 Replies View RelatedI have a problem with my login account. I have read numerous posts here about similar problems but have not found a solution that works for me yet. I have three regular login accounts - mine (admin account), my wife's (admin acct) and my son's (limited acct). For some reason control panel is not available on the start menu any longer when I am logged in my account (I do have the "set program access" on the menu but when I click on it it tells me I do not have permission to access). Control Panel is available on my wife's login start menu. When I go to user accounts in my wife's control panel - my account is listed there as an admin account.
So after reading a few similar problems in this forum I believe my account may be corrupted. So I create a new account under my wife's login, which I plan to copy my settings and files over to and delete the existing corrupted one, but I cannot create anything but a limited account there. I then ctrl-alt-del twice in the welcome screen to access the real admin account to see if I can change it to an admin account. BUT although control panel is on the start menu - when I click on it, it tells me that I do not have permission to access it. Even from -what I'm pretty sure is - the real administrator's account. How can this be? I have also tried to add the new account to the administrators group in lusrmgr.msc and that doesn't work either. I have spent so much time on this I am at my wit's end. Anyone have any suggestions that might get my account back working properly or how to get a new account?
every file i download is corrupt in xp
View 7 Replies View Relatedwhen I boot laptop I get this message. I'm running win media 2005, when I try to use my disk windows wants to do a clean install ,when i try to use the recovery console to copy the sys32 file it's unable to copy the file, i tried to use a linux live cd to access the harddrive (koppex, moppex)no luck.
View 9 Replies View RelatedI tried downloading anything from the internet but nothing works. I tried yahoo messenger file transfer, mail transfers and using links but my download don't open. I used download accelerator it works but the files tends to be corrupt.
I'm running Skype (the absolute latest stable release with auto updates on) on my XP sp2 machine. Every single time i use it however (I use video chat), my machine BSOD's on me within 5-30 minutes of usage. This happens even with voice chat only. I get a bsod error message pointing to tcpip.sys most of the times but sometimes i also get a random message at bsod.I'm using the tcpip.sys patch that was made by lvllord i think that uncaps the maximum number of half open tcpip connections. I did this for my torrent clients. None of them hang the system even when running 24/7.
View 9 Replies View RelatedIm doing a clean, brand spanking new install on a machine that has no floppy drive. I have switched around the boot sequence in the BIOS to boot the CD ROM first, and that recognizes the disc ok. Windows formats the unpartitioned hard drive to NTFS. At first I got an error saying the NTFS.SYS file was corrupt, so I wiped everything out, and began again. This time I partitioned the hard drive first, and it seems to want to go futher, and I no longer get the NTFS.SYS error, but when it begins copying files, it hangs at about 18 percent when it starts copying 'driver.cab' and I get a Blue Screen saying PFN_LIST_CORRUPT.