Disabling Automatic Driver Installation In Win 8
Jan 17, 2013
I have never ran into before with any Windows Operating system, including Windows 7. I am doing some testing on my computer, and I'm trying to do a *CLEAN* install of my video drivers. I uninstall all of the relevant drivers from Programs and Features. After that, I restart my computer. Upon restart, Windows decides it wants to automatically install the default drivers that it comes with.
Fair enough. I go to Device Manager and uninstall the drivers manually, stating that I want to delete those drivers as well. Restart. Windows, again, decides it wants to install the default drivers.
Okay. I go into System Settings, Advanced Settings, and I change the Settings so that Windows no longer looks for drivers via Windows Update. Re-uninstall all drivers (again, specifying that I wish to delete the drivers) and restart. Window STILL persists in installing default drivers. At this point I'm getting desperate, so I go into gpedit.msc and disable automatic installation of devices. Restart. This resolves the issue, but the problem with altering this setting is now I cannot manually install those drivers as well. As soon as I reenable the setting, Windows immediately starts reinstalling the default video drivers.
How to prevent Windows 8 from auto installing video drivers. Is there a setting that I can change that will prevent Windows from automatically searching for what it perceives to be new hardware? If I can change that, then I may be able to manually install my drivers without overlapping old drivers.
View 2 Replies
ADVERTISEMENT
Nov 21, 2013
Any way to stop the 8.1 upgrader from automatically installing (graphics) drivers as it sets up? I have an Acer AS4820TG with switchable Intel HD and Mobility Radeon HD 5650 graphics, and I'm 99% sure that drivers for one of these are causing a problem with installing 8.1 Pro. The screen turns black after the second restart, when Windows is "Getting devices ready". After this point it stays black.. no input of any sort affects it. I tried waiting it out for a while, and eventually I just did a hard shut down, at which point Windows reverted to 8. I'm hoping that if I can get it to install without the drivers, I can manually install them from the desktop.
View 4 Replies
View Related
Sep 15, 2014
I have an Xbox Controller S running on XBCD drivers for my Windows 8 computer. When I used these drivers on my Windows 7 laptop, I used DSEO to enable test mode, and it worked perfectly. Using the same method sends Windows 8 into a BSOD, so that's out of the question. The other solution is to reboot from the Settings menu and manually disable it at EVERY STARTUP. So, is there any other ways to disable DSE without rebooting every time I want to use the controller?
My computer is a 5-month old ASUS M11BB, 3.7GHz AMD A4, with Windows 8 64-bit installed.
View 9 Replies
View Related
Oct 12, 2013
Does Windows 8 give any extra flexibility over Win7 in being able to deactivate features? eg games, Live mail, IIS, etc?
View 1 Replies
View Related
Jul 19, 2013
in my previous mentioned as c as partition active and then made its as inactive
after that i am getting error code 0x000000f when troubleshooting the systems. how to fix that problem without re installing the windows again.
View 2 Replies
View Related
Jan 3, 2014
Just reinstalled Windows 8.1 and can't figure out what the deal is. I have a four monitor setup, and all of this worked perfectly before I reinstalled. I actually remember dealing with this issue before, but I couldn't remember how I fixed it.
Basically, with two monitors, everything works perfectly. The minute I connect my third monitor, it's like all the screen flicker, and then I get logged out and back to the start screen.
I've tried updating nvidia drivers but it doesn't work.
View 1 Replies
View Related
Jun 7, 2014
My PC fails to boot into Windows and launches Automatic Repair to attempt to repair Windows. When i try to refresh or reset alway get msg " there is a problem resetting your pc, no changes are made" My PC is preinstalled so no I don't have recovery CD/DVD Here pics
View 9 Replies
View Related
Mar 24, 2014
I have a Lenovo G580 laptop 2gb RAM, i5, and 500gb HDD. It had windows 8 RTM 32 bit installed on its C drive. It had come with DOS preinstalled so I had to do a fresh install of windows 8 via bootable usb. It worked well for few months but now it refuses to boot and goes into "automatic recovery mode" and then it says that your pc needs to be repaired with a recovery disc.
I did not made any recovery disc when it was working so I tried to do a fresh install of win 8 and then win 7 via bootable usb, but both have failed. The screen freezes after blue logo of windows appears and then it restarts saying it has encountered an error and needs to be restarted.
I have tried booting it in safe mode along with all other options on start-up menu but it doesn't work.
View 1 Replies
View Related
Aug 4, 2013
You have Windows 8 or Windows 8 Pro installed on your PC. Your PC fails to boot into Windows and launches Automatic Repair to attempt to repair Windows.
Automatic Repair is unable to repair your PC and you select "Advanced options". After selecting "Troubleshoot", you choose to either "Refresh your PC" or "Reset your PC".
In this scenario, recovery may fail and you are returned back to the main WinRE screen. This issue may occur if the System or Software registry hives have become damaged or corrupted.
To attempt to resolve this issue, follow the steps below. Following these steps should only be used if you are attempting to use the "Refresh your PC" or "Reset your PC" options in Windows RE because your system is in a non-bootable state.
-After Automatic Repair fails to repair your PC, select "Advanced options" and then "Troubleshoot".
-Select "Advanced options" and then select "Command Prompt".
-If prompted, enter in the password for the user name.
-At the Command Prompt, go to the windowssystem32config folder by typing the following command: cd %windir%system32config.
-Rename the System and Software registry hives to System.001 and Software.001 by using the following commands:
ren system system.001
ren software software.001
I did all that but when I tried to rename the Software.001 file the system responds: "The process cannot access the file because it is being used by another process" ...
I tried to create a Ubuntu start up usb key so that i could maybe get in and rename the file but that presented more problems.
View 5 Replies
View Related
Jun 22, 2014
I've just set up a clean system installation (Win 8.1 PRo x64). As a part of it I obviously installed my printer driver. The printer is Lexmark E260d and I use Lexmark Universal Driver downloaded directly from Lexmark's webpage.
My surprise is that after installation I have two such printers available at my system:
- "Lexmark E260" - which is the name I gave during installation,
- "Lexmark International Lexmark E260d" - which is another device appearing as a printer.
Both drivers / devices (?) print correctly yet I can see some differences in their functionality descriptions, when choosing Properties / Hardware. Lexmark E260 device has there "Print queues" only while Lexmark International... device has three types "Printers", "Print queues" and "Universal Serial Bus controllers". Another thing is when I double click on devices icons in "Devices and Printers" window - Lexmark E260 brings well-known list of documents actually being printed and Lexmark International... brings printer configuration dialog allowing to see printing documents, customize printer setting and so on.
Why I have somehow two different printers appearing on my system? Should I remove one of them and which? How can I avoid duplicating devices when installing drivers?
View 7 Replies
View Related
Jan 22, 2013
I am trying to install a oem copy of windows 8 64 bit onto my desktop, using a microsoft install dvd. I've installed xp, vista, and windows 7 onto it without any issues whatsoever, however when trying to install windows 8, I keep getting an error in windows setup that states the following:
Load Driver : A media driver your computer needs is missing. This could be a DVD, USP or Hard disk driver. If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now.
Since I'm using an actual microsoft disc, and the hash checks out okay, I'm not really sure how to proceed, as it doesn't seem to be the disc image.
The solutions I've come across are vague, and usually relate to USB/VMware installs instead of using a retail DVD. How I can get past this error?
My system:
EVGA Z77 FTW Mobo, updated firmware/bios
Intel 3770k CPU
Antec Quattro 1000 PSU
Kingston HyperX 3K SSD
EVGA GTX 580 3GB GPU
LG M-Disc Super Multi DVD/CD Reader/Burner
View 4 Replies
View Related
Jun 17, 2014
I did a factory reset on my windows 8, and it messed up, not completing. so it is now stuck on a cycle of 'preparing automatic repair' and 'diagnosing your pc'.
And I today recieved the windows 8 cd to reinstall the os.
But after I've chosen language, I get error message saying I'm missing 1 of the media drivers.
Computer: alienware m14x r2 laptop
View 9 Replies
View Related
Sep 15, 2011
I am trying to install the new develp build of Windows 8 (x86) on my asus eeepc 1005pe. This is a netbook which doesnt even have a cd/dvd drive.
So anyway, I extracted the iso on a bootable usb flash drive. I boot, and when I click install it just hangs for about 10 minutes and then it gives me this error:
I tried setting the bios from AHCI to IDE. This does not work, I even get a bluescreen of death when I boot up in the current win7 sp1 install. But anyway on google I read a lot about this problem and one of the solutions is to put it on AHCI.. but not for me as it was already on AHCI. Anyway IDE is not workin either.
Just recently I installed win7sp1 on this netbook without a problem. I checked the sha1 hashes of the Windows 8 ISO and they are confirmed, so that is not the problem either.
View 9 Replies
View Related
Jan 8, 2013
I have installed windows 8 in my dell laptop, then I installed the drivers after the extraction. then I found that a folder of name dell is created ,inside that folder a new folder 'driver' is created when I found that all drivers extracted folder which were just been nstalled successfully. now my question is ..can I remove those folder cause they have been already installed?
View 5 Replies
View Related
Sep 15, 2014
My system specs are the same as under my profile.
Running a single R9-290 on Win 8.1 Pro 64bit.
The PC completely hangs up when installing the new 14.9/14.7 beta drivers.
It extracts fine, checks system requirements, starts installation, reaches "Installing AMD Display Drivers" and flickers twice, and freezes up a second later.
Tried almost everything. Uninstalled previous 14.4 via control panel (they work fine btw), used Display Driver Uninstaller in safe mode, restarted and tried installing, but to no avail.
Have also tried uninstalling the MSI afterburner and other similar programs but get the same result every time.
View 1 Replies
View Related
Jan 21, 2014
My computer crashed(?) and wouldn't go past the setup utility screen. I finally got my Windows 8 installation disc, now my computer is telling my it can't find a media driver.
View 1 Replies
View Related
Jun 8, 2014
I have a toshiba canvio basics 1TB portable external hard drive usb powered. Model no. E05A100BBU2AK. I had purchased it some 3-4years back. It worked for some 4-5months or so. Then, whenever i plug it in the port, an error comes "FAILED DRIVER SOFTWARE INSTALLATION". The device doesn't come with a software installation CD or guide... It's plug and play only I think. The white LED light goes on flickering right when i plug it in till i remove it. A click sound along with metallic scratching sound comes from the device at a regular interval while plugged in & also I can feel the drive moving inside as soon as it is plugged.
I had tested it in all the ports of my system, also in many other systems of my friends but gives the same error on plugging in or the system does not identify it. It cannot be seen in My Computer. the hard drive is not getting recognised. In Device manager I cannot see any error in USB ports & everything is workng properly. USB ports works when other devices are plugged in.
View 9 Replies
View Related
Jan 1, 2013
I'am trying 8 hours now to install Windows 8 to an Acer Aspire 5920g.
Problem is that when the usb flash drive comes to hdd presenation point the hdd isnt being displayed.
My guess is that Sata AHCI/IDE controller driver for the 5920g's chipset is missing from Windows 8 installation dvd.
I googled very much and i can only find XP and Vista Sata Drivers while oi need 8's.
Is there an alternative? I must get 8 installed in that laptop.
View 9 Replies
View Related
May 23, 2014
My computer has always had intermittent BSOD but generally it's been only 1-2 a month and after a system restart everything works fine. In the last couple of weeks I've been getting BSOD after only a few minutes of operation every time I start up and generally after these errors the computer won't boot - sometimes it will be a black screen after BIOS check, sometimes it won't even get that far - just black screen without the BIOS check even starting. Usually the only way to get it to boot again is to disconnect the power and remove the CMOS battery from the motherboard. I've run driver verifier which has indeed generated it's own minidumps but I don't really understand what these error reports are trying to tell me.
View 1 Replies
View Related
Aug 22, 2014
How do I disable the auto snap feature so that when dragging a window it does not resize itself to the full screen?
View 1 Replies
View Related
May 21, 2013
I'm using a third party tile creator (Oblytile) to make tiles for the Start screen. It works fine, but I still get a User Account Control notification when I'm trying to launch the apps even though the app it's technically asking about is Microsoft Windows Based Script Host!
Is there anyway I can stop the notification for this program without disabling the thing all together?
View 3 Replies
View Related
Jan 20, 2013
Not good with computers. Just purchased computer with Windows 8. Don't know anything about it. 1st problem is how do i disable the "suspension mode"?
View 9 Replies
View Related
Feb 7, 2014
I'm disabling some fonts via font manager (NexusFont) because there's way to many fonts I don't use and it's really annoying to scroll through every single font in PhotoShop and Illustrator. So which fonts should I not disabled? Like what are the fonts that Windows 8.1 and programs usually use?
View 5 Replies
View Related
Nov 13, 2013
Right so I want to disable my touch screen because my friends at collage are very good about pissing me off (as banter). And I would like to know how I can disable it with the push of a button.
View 5 Replies
View Related
Jul 15, 2014
Any way to remove this screen when restarting Windows?
View 3 Replies
View Related
Jan 19, 2014
Everytime I start my computer it ends up showing the icon for the onscreen keyboard in the taskbar notification area. How can I prevent this? I don't need the onscreen keyboard and doubt if I'd ever use it. Oh, by the way, I'm running W8.1 if that matters.
View 14 Replies
View Related
Jul 9, 2014
Since about 4 days, I'm having various problems primarily on the internet.
1) All sorts of downloads from the internet first load normally, then stop at 99% and usually dont finish, some end 5 minutes later, resulting in a damaged file. Example: Downloading a song this way makes it randomly jump parts of the song in short intervals (a song of 3:50 minutes would then be in my itunes with a duration of 3:46 due to the random jumps); downloading CCleaner and similar programs did not work at all (not even a damage file).
2) Pictures on the internet become "puzzled" and colors change randomly. Example:
3) Only tested this on youtube - videos load 10x slower than before the issue + some flash plugin keeps crashing (also never happened before - even with 50+ tabs).
4) Frequently sites do not load (they stay white).
5) A "firefox update recommendation" and a "flash player update site" with untrustworthy URLs often randomly open, sometimes even 5 times in 5 seconds + I suddenly get overloaded with random advertisement from the left, bottom and right screen sides.
THE PROBLEM WAS A PLUGIN CALLED "NET-CRAWLER" >uninstalled it, and everything worked out.
View 2 Replies
View Related
Oct 19, 2013
disabling Windows 8 firewall through registry.
View 1 Replies
View Related
Mar 18, 2014
So basically, IE11, independent of what the settings for Windows 8.1 is, will ALWAYS have autocorrect on and there's no easy way to disable it. I actually even encountered an official bug report were an MS employee closed it stating that "this is by design for now".
Without further ado, spell-checking is controlled by C:WindowsSystem32MsSpellCheckingFacility.dll. You'll want to rename this to something, say MsSpellCheckingFacility(2).dll, to disable this.
For those not technically inclined, note that this is a system file and it may cause some problems. Specifically, if you want Windows 8 to spell check for you but not IE11. You'll also need to take ownership of said file if you want to rename it. See Take Ownership of a File, Folder, Drive, or Registry Key in Windows 8.
View 2 Replies
View Related
Jan 27, 2013
I just got Windows 8 and tried disabling the log-in screen. I went into "netplwiz" now I seem to have lost my administrative powers.
I can't download programs or access the "user accounts" tab in the control panel. Every time I try to do something that would require admin powers, I get a "user account control" prompt that tells me that if I, "want to allow the following programs to make changes to this computer," that I need to enter an administrator password and then click yes.
But there is no text box to enter a password and the "yes" button is grayed out. My only option is to hit "no" or "show details."
When I go into "PC Settings" and the "users" tab, it says that "there are no other users on this PC" and "Sign in as an administrator to add users to this PC." But how do I do that?
I've tried going into the "run" operation and entered "net user administrator /active:yes" command, but nothing happens. I also tried entering "msconfig" but I ran into the same problem of not having admin powers to do that. I tried starting in safe mode by jamming shift and F8 but that didn't work either.
View 9 Replies
View Related
May 16, 2014
I've noticed for a'while that the ATKOSD2 service would always start-up, even though the ATKOSDmgr option box is unchecked. I'm wondering if this command line would disable that particular service for good.
echo Start
echo #
echo ######################## Default dirctory for x86 x64 ########################
echo #
echo this command is default system32 directory for x86 OS or x64 OS
cd %windir% & cd system32
reg delete "HKCUSoftwareMicrosoftWindowsCurrentVersionRun" /v "ATKOSD2" /f
reg delete "HKLMSOFTWAREMicrosoftWindowsCurrentVersionRun" /v "ATKOSD2" /f
echo #
[code].......
View 9 Replies
View Related
