About half the time I use Windows Easy Transfer, it fails to transfer the setting in Outlook, which is a huge hassle... I back everything up, but I have problems with Outlook. I do the same thing every time and sometimes it works, sometimes it doesn't... very frustrating! No error messages or anything like that, it just doesn't put the account settings and folders back in Outlook...
View 2 RepliesI recently bought a new Windows 8.1 computer to replace my old 8.1 laptop. I was going to use Windows Easy Transfer to transfer all my settings and files, but I accidentally (on my old computer) clicked "This is my new computer" and I cannot change it to old.
View 3 Replies View RelatedI had a Windows 8 machine & upgraded to 8.1 before I found out all the sneaky underhanded sleazy things Microsoft did. In particular pulling the useful (and in my case necessary) 'Easy Transfer' tool that was *on my machine* in Windows 8 and replacing it with a something completely useless to me and calling the same thing which it isn't.
So I'm wondering if the Windows 8 Easy Transfer is available for download somewhere and hoping it will work under Windows 8.1.
It doesn't look like the Windows 8.1 upgrade keeps any of the Windows 8 stuff in case you change your mind and want to go back, which is starting to look like a really good idea.
It's a brand-name pre-installed thing so no Widows 8 media, just a recovery partition so I can return the machine to factory with Windows 8 or even go to an OEM Windows 7 (alas no drivers). Rather odious at this point, but may be my only option.
Unless maybe there's a way to pull the Win 8 files from what's on the recovery partition (*.swm files) .
I have recently found a Windows Easy Transfer file on a USB Stick. It was created by Christmas time, it is before the computer (Hard Drive) broke. So, I luckily found this on USB Stick in one of my drawers from last Christmas.
Now I am currently have a new tower PC which it has Windows 8.1 in it and it works fine. Just that my old tower has been upgraded from Windows 7 to Windows 8.1 (trial) for a while from October 2013.
But, I can't remember what the password was - so I am struggling to know what the password was. I am just worried that I cannot reset the password on the Windows Easy Transfer, it has all of my lovely photos and videos and also my work documents. The thing is that I cannot get access to the old PC, because it is gone. But, I have got my stuff in my Windows Easy Transfer file - just that I can't remember the password.
Is there a way to get to my password out by doing something?
"If you want to see my System Specs (this PC), you click it below on the left"
Still getting accustomed to wind 8. Want to transfer files from computer with Vista O/S to Laptop with Windows 8. According to some instructions, I should be able to do this with Easy Transfer so I need to know, how do I access Easy Transfer on the laptop.?
View 1 Replies View RelatedAfter transferring my files using Windows 8 easy file transfer to my new laptop, how do I tell the new laptop where my documents are? The are in OS(CusersBobDocuments)...
View 3 Replies View RelatedI used the Easy Windows Backup on my old machine (running vista), saved to an external hard drive. Installed the latest 8.1.1 on a new machine and tried to use the Easy Windows Backup to restore my stuff, but I get this message "Windows Easy Transfer can't transfer files from Windows Vista or Windows XP".
Is there any way I can recover my files from the Easy Transfer Backup?
It looks like this PC can't run Windows 8.1. This might be because the Users or Program Files folder is being redirected to another partition."
By using the Customize feature of Windows Easy Transfer Wizard, I created a MIG transfer file, without selecting the user folders (such as Documents, Pictures or Video).
If the MIG file is copied to the C: drive, will the User Profile be created on the C: drive, when Easy Transfer is run?
I am guessing that the default User Folders will be created on the C drive, and then the locations can be changed to match the present physical location on my other partitions.
I'm trying to use Windows Easy Transfer to rename my user profile and change the folder name to match however in Windows 8.1 that feature seems to be missing. How would I backup my files like I did in 8.1 and restore it to a user account?
Selecting Yes...
Selecting No...
I want to transfer the contacts from a vista pc. the vista pc uses office 2007. I want to export or transfer the contacts from that pc to a windows 8.1 pc that has outlook 2013 installed. I tried WET, but that doesn't work with 8.1 from vista.
View 3 Replies View RelatedIt appears the transfer files and settings is missing from windows 8.1, I don't use the so called Cloud, so I would guess the only way to move my Windows 8.1 installation to a new hard drive is to use the backup image app, or use a backup program. How to make it easier to move to a new hard drive in case of failure.
View 5 Replies View RelatedSo remember when microsoft gifted us with free win 8 + wmc a few months back? I got a computer perma activated with it but now i would like to move it to another pc, while i dont mind deactivating the old one. Is there an easy way to do this?
View 9 Replies View RelatedI started to transfer a file in Windows 8.1 pro but it will only use up to 22% watching the disk in task manager. I tested it in crystal mark and HD tune and they both give the hard drive 150 MB's Read /write. This is EXTREMEMLY annoying for network transfers as well since I can get 250 MB's R / W out of a server from NIC teaming. How can I set it to use 100% for file transfer? And NO it isn't the main drive so I do not care about other processes. The picture bellow is the hard drive (Drive F: ) during a file transfer. Please ignore the other drive (K .
View 3 Replies View RelatedHow can I transfer a personal DVD film to my PC with Windows 8
or
directly to Windows Movie Maker?
I have a Toshiba Qosmio X870-BT3G23 and it has 2 1TB HDDs in it. I just purchased a SSD and want to use that drive as primary with OS installed. Is this possible and how would I go about doing it? My computer came pre-installed with Windows 8 64bit.
View 9 Replies View RelatedI have 2 RAID 1 mirrors (2 pairs of 2Tb discs) on an i7 870 on GA-P55A-UD7 (Gigabyte) motherboard under Win 7 64bit.
I have ordered a new desktop (i7 4771 on Asus Z87 DELUXE/DUAL MB) (hopefully with 8.1 on it (another thread))
When I get my new desktop will I be able to transfer the two RAID 1 mirrors from the Win7 desktop to the Windows 8.1 desktop and have them work properly?
When transferring from my windows 8 pc to my whs the file transfers seem to stop at 99% and then fail.
View 1 Replies View RelatedMy Windows 8.1 installation started developing some problems including malware. So I decided to reinstall Windows, but in order to make it without a hurry, I used a separate disk. This way I could use the old installation for everyday work until the new installation was ready for the switchover. But, I didn't have a spare SATA hard disk to start with, so I decided to use an old IDE hard disk.
My motherboard Asus P8H61 doesn't have an onboard IDE controller, so I used a Logilink IDE/SATA PCI-E card (JMicron JMB36X chipset) to connect the disk. I then managed to transfer some data to other places and freed a spare 500GB SATA disk so I could clone the installation since the old IDE disk was only 120GB. I used Acronis True Image 2014 and did an "As is" clone to make sure that the transfer would be successful and bootable. I would later extend the partition to take all the available space. So far so good.
The problem is that the disk works only connected on the Logilink card (JMicron JMB36X controller) and not when connected onboard (Intel controller). I attempted to repair Windows startup using the DVD-ROM but didn't manage to start Windows successfully, unless I connect the disk on the card. I wouldn't mind too much about it, but the card sometimes blocks when there are too many programs open increasing disk access freezing the system and I have to reset the computer. Not really convenient.
So what can I do to make the installation usable on the onboard Intel controller? Is there any workaround? Of course I would like to avoid reinstalling everything and waste a week's effort!
I was working on a windows 8 laptop and wanted to transfer user files to the new laptop. I pulled the drive from the Windows 8 laptop, plugged it into an open sata port on my windows 7 bench machine (which already contained the files to be transferred) and booted without problem. I assigned the windows 8 drive a letter and opened the drive. All the files of the Windows 8 drive were visible. I opened a directory off of the root, created a new directory and copied the files. No problem. I opened some of the image files and all looked well. I shut down the win7 box, pulled the Windows 8 drive and put it back in the laptop and it booted, no problem.
When I went looking for the files, they were no where to be found! Win 8 showed the "used space" as if the copy never happened. Thinking I made an error on the copy I shut down the Windows 8 laptop and pulled the drive, plugged it back into the win7 box and booted. The win7 boot detected "file corruption" on the volume in question and did some "orphan" recovering and a bunch of other stuff. When it finally finished and booted all the files copied were in a "found.000" directory. I took ownership and repeated. Funny thing is that while the win7 showed the drive with the expected 40gb of data taking up space, the windows 8 showed the "used space" as if the data wasnt even there? why as I try to copy the files from the win7 drive converted to a usb external directly into the Windows 8 laptop.
I have a smartphone and a PC with Windows 8 Pro 64 bits. They are paired using bluetooth. But everytime I want to send a file from my smartphone to the PC, I get a confirmation box in Windows 8, asking me if I want to accept or reject the file.
The problem is that in my PC, I have a fullscreen application, and I want that my users use nothing but my application. They should not have any access to any Windows menu or window.
So, how is it possible to disable this confirmation box, so Windows could automatically accept any sent file ?
Transferring files from Windows to (or From) a Sammy S5 phone's external micro SDHC card seems to take for ever.
Using Linux (Opensuse or Linux Mint) the device immediately comes up as an MTP device and transfer is around 7 mb/s which is fine for a Micro sdhc card.
Have I got something screwed on the Windows system -- it doesn't recognize the device as an MTP device - it just seems to recognize the internal card as another Disk -- but so SLOOOOOOOOOOW !!!!.
I plan to get a ssd drive and run only windows with few other most useful software on it.
I transfer only windows 8 system with system settings. can I make a image of windows system only, not whole hard drive? and how to backup activation. the windows 8 I have is a upgrade license I brought from Microsoft upgraded my existing windows 7.
Can my Windows Pro license (non OEM) be transferred to my rebuilt computer that now has a different model motherboard and CPU? I tried booting up the newly rebuilt system with my system hard drive (two SSD's in RAID 0) as is but failed. It looks like I must do a clean install and then try to restore everything from my last backup.
View 2 Replies View RelatedI am curious about windows 8 transfer speeds. I'm currently running a Dell XPS 1647 (mid 2010 model) with a USB 3 card from Startech installed in the expressport. It works great, but windows pretty consistently does this thing where if I'm transferring files, it will start fast and then slow down by at least 50%. I have attached a photo of this situation. In this case, I was transferring roughly 500gb of files from a LaCie drive (7200RPM) using eSata to a Western Digital drive 2.5in external drive using USB3. to about 70% of the transfer I was getting 80mb/s transfer speeds, then it drops to roughly 26mb/s for the remainder. This hasn't just happened on my laptop, on my new desktop running Windows 8 Pro, the same thing can occur.
Is there a reason for this? Is it a windows thing, or a hardware thing? I find it does it on USB keys as well - starts quick, then quickly drops to about 20% of the speed.
My laptop is being replaced as it has a faulty motherboard (but still works). The new laptop will be identical.
Is there any way I can clone my hdd so that when the replacement arrives I can copy all the data onto that hdd without having to reinstall all my programs etc.
I know there are various cloning softwares available, but do they work? Are they any good? and most importantly are they idiot proof??
Any best way to achieve this data transfer to new machine.
I was wondering if there is a way to transfer a 32-bit Windows 8 Pro Upgrade license to a bootcamp partition in a 2012 Mac Mini without having to buy a new one. I bought Windows 8 for my laptop and the laptop will no longer be used. So is there a way I could maybe deactivate the license on my laptop, and reuse the same license on the Mac Mini?
View 7 Replies View RelatedI want to move all my data from my MacBook to a laptop with Windows 8. I have everything backed up on an external HD; when I plug the HD into the laptop, it's not recognized. I've tried transferring via WiFi, but the MacBook is not allowing that to happen. Is there anything I can do with my backup HD so that it is recognized by my new Windows 8 laptop?
View 2 Replies View RelatedI am currently using windows7 in a 1 tb harddrive. I have another internal harddrive that im not using that has windows 8 on it but is only 150gb. How do i bring windows 8 to the 1tb harddrive i am using to replace windows 7?
View 6 Replies View RelatedI recently bought a Dell XPS 8500 with Windows 8 on it. I did a clean install of Windows 7 on that machine and would like to use the Windows 8 OEM license on it on my Dell Inspiron 17r SE laptop.
I tried typing in my key to do a clean install on the laptop but I got this error message:
The product key entered does not match any of the Windows images available for installation. Enter a different product key.
I bought these machines and therefore paid for the software, I should be able to install them on any machine I want. All of my machines are Dell, why can't I do this? What's going on?
How do I trans from external HD to new win8 pc w/o WET? My pc was running vista and is toast so I can't install WET on it.
View 14 Replies View RelatedIs there a way of copying my Contacts from an iPhone 5 to the People app in windows 8.
View 2 Replies View Related