This morning i got a "blue screen of death" and my pac said "your pc has ran into some problems". It then fixed everything and all was fine. I then typed "sfc / scannow" in command prompt and come up with the message "windows resource protection found corrupt files but was unable to fix some of them windows 8".
Windows 8.1 being used.
It seems my windows ran into a problem. I am using Sony VAIO with OS windows 8, ram 8 GB with Nvidia gt780m graphic card 1 GB. It all started when i restored my pc (without recovery disks) as i was getting some problem in installation of Game (assassin Creed 4) and after restoration it worked fine and well. Then after a week or so my windows crashed and I rushed to service centre as I was not having my recovery disks to restore it. back I got my windows again and so I tried to install the same game but it was not installing showing error (screenshot is attached). I looked to other software like NFS MW 2 again I had same problem.
To ensure that installation files were not corrupt i copied the same files on my friends PC and installed it and it worked well and fine on it. Then I got to know it has something to do with my windows system file so I Google it and found the solution to run SFC/scannow command I did the same and there it was the corrupted files of windows(SFC details are attached). I found one particular solution (though it didn't work) Dism /Online /Cleanup-Image /RestoreHealth command and tried to repair those files but it alwayz get stuck. How to get on to this issue cuz neither it's allowing me to play games nor letting me run a application properly it alwayz interrupt the application and say that certain .exe need to be closed.
My laptop is running ok but I have noticed that certain programs have been taking a lot longer than usual to install/update (e.g. iTunes) but they always do. Then the last few days AVG Antivirus has been wanting to auto-update the software (not just the virus definitions) but each time it would freeze during the ''configuring'' step and subsequently cause every other program running to freeze and stop the opening of any other program - although I could still move the cursor so not a complete freeze if that makes sense.
So today I removed AVG with the removal tool and tried to do a fresh install but now I get a failure message immediately telling me ''MSI Engine: failed to initialize the package''.
How to go about fixing this and ran system file check which said corrupt files were found but it was unable to repair some of them. Here is the log:
Originally Posted by CBS.log 2014-08-20 14:24:13, Info
CBS TI: --- Initializing Trusted Installer ---2014-08-20 14:24:13, Info
CBS TI: Last boot time: 2014-08-20 13:56:23.498
2014-08-20 14:24:13, Info CBS Starting TrustedInstaller initialization.
[Code] .....
How to read one of these or even if it effectively evaluates the status of the installer.
Windows resource protection found corrupt files but was unable to fix some of them..
View 1 Replies View RelatedAfter installing Windows 8 upgrade over Win7 on two desktops and one laptop, I ran sfc /scannow (in an administrator command box) as I usually do after new installations, and in all three cases sfc found corrupt system files and repaired them. So downloading the upgrade and installing might find running sfc useful!
SFC /SCANNOW Command - Run in Windows 8
Just purchased a new desktop PC with Windows 8, after some video card issues (now resolved), tried to run System File Checker and received:
"Windows Resource Protection found corrupt files but was unable to fix some of them...."
I copied the CBS file to take a look but i'm not really sure which of the multiple errors are causing my issue.
I've got a few:
"[DIRSD OWNER WARNING]"
and
"Failed to create CSI transaction"
"Failed to get CSI Inventory"
My desktop (Dell Optiplex 755, Windows 8.1 Pro 32-bit, 4GB RAM, Intel Core 2 Duo CPU E6550 2.33GHz) has been playing up over the weekend.
1) Have run restore point 30 June.
2) Sometines beeping (seems like 3-2-3) & not starting. Have removed the 3 RAM sticks, & replaced one at a time. All allowed it to start, so put all back & now booting OK.
3) Ran SFC /scannow, and reported corrupt files found and unable to fix some of them
I am attaching a screen shot of the sfc report, and also attaching the SFC log file.
The latter is many pages if info reports. How to interpret the log, and/or how to repair the system?
As the lpg file CBS.log is nearly 5MB I have split it into 3 files named CBS20140707-a.log.txt, CBS20140707-b.log.txt & CBS20140707-c.log.txt to fit within the 2MB limit for attachment size.
In my laptop, SFC or DISM cannot fix corrupt files so I have to manually replace them but can these corrupt system files cause BSODs? Im asking because I am having BSODs ...
View 3 Replies View RelatedMy windows update, windows defender and lots of other programs including Vistart start menu refuse to work. I run the Windowsupdatediagnostic download and it tells me the SFC Output is corrupted or missing. Recently the BITS wasn't working but for some reason found the windows events log was disabled in services. I went to black vipers site and reset all of the services to a standard or safe setting. Yet I cant get anything to work. Ive been running the sfc /scannow in command prompt and it says it found problems but was unable to fix them. It says to check the log files, but when i go to open them they refuse to open and say i don't have administration privileges???
I suddenly got BITS working recently and i swore that would have fixed everything but to no avail. I am afraid to have to to a factory refresh but the problem is I foolishly listened to microsoft suggestion in the store to upgrade this from windows 8 to 8.1 therefore it automatically deletes the windows 8.0 partition on the computer thereby erasing its original operating system with cd key....
I have heard of ones doing a factory reset or refresh and finding since that upgrade they cant get it running without them purchasing it....
I have done a system restore, but the last system restore was a month ago and unfortunately that was when the system was exactly the same as this.
So right now i need to try every possible avenue I can take and want to see if its possible to do a factory refresh without it freaking out because the cd key on the bottom of the computer is for a windows 8.0 and this is the useless upgraded 8.1. This is a Toshiba C55-A 5300 laptop
I ran SFC and it complained that some corrupt files could not be repaired.
Here's the relevant part of the log:
Code:
2014-09-17 00:06:45, Info
CSI 00000520 [SR] Verifying 100 (0x0000000000000064) components2014-09-17 00:06:45, Info
CSI 00000521 [SR] Beginning Verify and Repair transaction2014-09-17 00:06:46, Info
CSI 00000522 Hashes for file member
[Code] .......
Win App store not installing app, SFC scan details attached. Some files were corrupt... ow to replace/repair them.....
View 9 Replies View RelatedI was running SFC after reaching 100% I get this error Code: Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.Log windirLogsCBSCBS.log.
For example C:WindowsLogsCBSCBS.log.
Note that logging is currently not supported in offline servicing scenarios. I don't want to do another clean install. Here is my CBS log as well ...
I bought my Sony VAIO flip on 12 Feb this year. At the beginning of April it started frequently crashing (a few times a day when using it on my commute and in the evening). It (almost) always crashes with a BSOD, but no error code, and no crash dump generated. About a quarter of the time, upon restarting from the crash, its says "Couldn't start Windows. Internal SSD not found". I'd keep restarting it and it would fail to start with the same error. If I leave it for a while (30 mins+), it restarts fine, until the next crash.
Given the 'SSD not found' errors, I had assumed it was a hardware fault with the drive failing intermittently. This would also explain the lack of crash dumps if the drive had issues and Windows couldn't write to it. However, I've read around and found some SSDs displaying this behaviour after a crash due to unexpected power loss to the drive, so I'm now wondering if this is a symptom not a cause.
Furthermore, windows restore does show windows updated some drivers at the beginning of April when the crashes started.
I did have one crash with and error code and a dump (24th April) but this is the exception. From the event log (occurrences of id 41 "The system has rebooted without cleanly shutting down first") I can see crashes a few times a day every day I've used the computer in April:
Date Count
14-Feb 1
17-Feb 4
05-Mar 1
06-Mar 1
08-Mar 1
09-Mar 1
18-Mar 1
22-Mar 1
23-Mar 1
28-Mar 1
29-Mar 1
31-Mar 2
03-Apr 2
04-Apr 4
05-Apr 2
06-Apr 6
07-Apr 4
08-Apr 1
16-Apr 6
17-Apr 3
20-Apr 3
21-Apr 5
22-Apr 1
23-Apr 2
24-Apr 8
25-Apr 2
26-Apr 6
I've tried cloning the hard drive to an external one and booting from that to eliminate issues with the internal hard drive but I can't really get that to work.
This morning with a big surprise I found that a lot of files had been deleted from my external HDD
On the desktop I had a look in recycle bin and could notice it was empty.
So sad, I plugged the external HDD on USB port and had a look again in recycle bin, at my surprise many files were there, waiting to be deleted and I could restore them by chance.
I unplugged the extrenal HDD and plugged another one and noticed a file was present again in the recycle bin waiting to be deleted., then I unplugged the HHD and tried to cancel the famous file with no success, the only way was to plugged again the HDD.
So strange situation as the recycle bin icon does not look as it is full, so I don't know if this is a bug from Windows 8 or not but will take care in future as I never seen that problem with Windows 7.
I had a problem with BSOD and tried to run sfc /scannow command but found corrupted files and couldn't fix them, I finally resorted to clean installation, today I received a new BSOD with error 0x0c000021a, and tried again sfc /scannow and message appeared FOUND "CORRUPTED FILES, BUT COULDN'T FIX THEM".*
View 6 Replies View RelatedWhen viewing mp3/jpg/mp4 files in library or search view, one is unable to modify tag and metadata to these files. This is a new problem since the release of Windows 8.1. Prior to that (Windows 8), this problem was nonexistent.
This issue is profiled in:
[URL]
This issue is obviously breaking the search functionality.
I have a TB drive and when I was trying to delete some files, it crashed. As a consequence, the recycle bin has some invalid information in it. If I try to perma-delete files in there, the system freezes. I try to restore files, it freezes. When I tried to restore files, it also asked me if I wanted to replace the files in the respective locations that it was restoring to, which to me means that the files are still there and its in some kind of limbo.
I'm sure this problem is at least somewhat related to the hybrid boot feature with the crashes. I dual boot with Linux Mint 15. I think that upon messing with some files on the TB drive and going back to Windows caused it to... well I'll say have a seizure. Now I've done chkdsks and it never seems to truly finish. It gets to the end, and sits there, and maybe even freeze or crash. But when I do a chkdsk I can usually access my files in Linux in read-only mode.
While, in Windows 8, I can still access everything perfectly fine. I can read, write, and do what I want normally so long as it doesn't involve anything with the recycle bin. Also, say I try to go to the files on the HDD that I tried to delete but are still there and delete them, it freezes crashes.
I've also disabled that hybrid boot feature and have attempted clean shutdowns and in some cases it would even freeze on shutdown. Also I've done both chkdsk /r and chkdsk /f with the only difference that one takes hours and the other doesn't.
I have 2 programs that I cannot install on my new Win 8.1 PC but they install fine on Win 7. I also believe that I was able to install 1 of them when I had Win 8.0
When I install I get error message on one of them "Error 1723.There is a problem with this Windows installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor."
If it makes any difference the files I am trying to install are GCSMSetup_3_6_0.msi and msgames_win8_x64.msi
I am having a folder of size 28.7GB which contains 551000 files (547000 jpeg files and remaining files with some other extension) and 152000 folders. I am unable to access all my files and when I view the properties of the folder in windows explorer it is showing file count as 432000 but when I try to delete the folder it is saying that 551000 files found do you want to delete these files.
how to solve this issue. I have even copied the folder to another harddisk though no use.. I have even tried stellar phoniex data recovery software though no use I mean it is showing file count as 432000.
I am using Windows8 OS and my harddisk is partitioned as ntfs.
This has happened a few times to me. I work a lot with professional Audio Production and I just tried to move some files that were created last year on the same PC (using windows 7 64-bit at the time) from one folder to another on the same partition. I used the 'take ownership' context item and even added my user name (only user on my PC) with all permissions. But I still couldn't move them (not one application or folder open that was using the files inside).
In the end I had to copy/paste and delete the originals afterwards. They deleted fine, but wouldn't allow moving. How to avoid this in future, so that I can just move the files?
It's happened to a few (seemingly) random folders since I've started using windows 8 64-bit, amongst hundreds I have in the parent folder from the same dates +/-.
I am having a problem where any msi (and some .exe's) I have try to run to install a program have trouble accessing the AppData folder.
This is a recent install of Windows 8.1 (on a fresh drive) and then moved the user folder (which I think could be causing the issue). I moved the user folder using these steps User Folders - Change Default Location . I have proper access to the folder and everything. The most recent failure for me was Skype, after trying to launch the app which (seemingly) comes with Windows 8, I decided to install it myself. When I did, that box came up.
TL : DR - Programs will not install and it seems to revolve around my AppData folder.
I am running Windows 8 64-Bit on a new Advent Monza T100 laptop.
I am unable to make changes to Program Files (x86) which is very annoying as this means I have to install programs to my desktop.
When I try to move something into Program Files (x86) I am greeted by the usual 'You need permission to perform this action' message.
I have tried to Take Ownership of the folder using advice from many different forums, however my problem seems to be unique because I am not able to change the ownership from TrustedInstaller to Administrators.
When I click 'Change' the window transforms into this...
I just tried downloading an exe file to the "Program Files" folder & was not able to in Win 8.1 pro. I get the attached message. I believe I was able to save files in this folder in win 7. I am the admin.
View 4 Replies View RelatedI'm having a pretty major issue with Skydrive on Windows 8.1. A vast majority of my files are unopenable from Explorer (or the Modern UI app which seems to just open them through explorer in the end anyway). When I try to open one of these files, I receive an error message titled "1 Interrupted Action" and displaying the message:
An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search to solve this problem.
Error 0x80040A41: No error description available
I have yet to find anything even resembling a solution when I search for that error code. The options this error window gives me is to "Try Again" which presents a typical explorer progress bar that never goes anywhere or to "skip" or "cancel" which do the same thing. Essentially this means that I have to use the skydrive web client to download the file to some other location locally and then edit and reupload from there. As far as I can tell there also isn't a traceable logic to what files are going to be accessible and which ones are not. I could literally be just finished working on a file, save it, and have it inaccessible when I try to reopen it. This error has not improved or changed at all by my making any files "available offline" or "available online-only" (in fact clicking those options doesn't seem to actually change their Availability that is listed in explorer).
I've used Skydrive for a few years now (since the beta I believe) as my primary cloud storage service, I pay for Office 365, and therefore I have access to a larger amount of storage on Skydrive than I do on other cloud services. I'm using Google Drive temporarily, but its incredibly inconvenient given how invested and reliant I've become to Skydrive.
Any way of resetting or jarring Skydrive on 8.1?
This was working until today. Now, if I right click my Word or Excel icon on the task bar, I see my pinned and recently accessed files, but if I click to open (or right click and then click open) the following happens - the menu goes greyed out for slightly less than a second, then the entire task bar disappears for a second, then the notification icons reappear, and half a second later the task bar icons reappear, but no files open. The icon itself works, to open the program, it's just the files which will not open. It only seems to Office which is affected.
View 7 Replies View RelatedI am having a folder on external usb harddisk of size 27.8GB which contains approximately 555000 jpeg files and 132000 folders.I am unable to see all my files in my folder and if I see the properties of this folder it is showing number of files as 440000 files and 25.6GB and when I tried to delete this folder it is showing number of files as 555000 ofsize 27.8GB.My external usb harddisk of size 1TB is formatted as ntfs of single partition.
How to solve this issue I mean I want to view all files in this folder.
installing apps on my laptop running window 8.1. I select install the app I want. The store downloads it and "installs" it. The files are hidden in the program files however in the start menu the app icon is just a box. When i click on it, it says that there is a problem and it cannot be opened. the store would repair the install. I have tried that but no luck. No apps seems to be working that I download and i cant delete them because there is no such option in the start menu. And then manually deleting the files is also impossible because windows blocks it even when i have admin rights.
View 4 Replies View RelatedI am trying to debug some crash dumps which all point to NTOSKRNL.EXE but I am unable to debug or even analyze it because the WinDBG throws me an error :-
Code: ************* Symbol Path validation summary **************Response Time (ms)
LocationOK C:symbols Symbol search path is: C:symbols Executable search path is: C:symbols Unable to load image SystemRootsystem32
toskrnl.exe, Win32 error 0n2*** WARNING: Unable to verify timestamp for ntoskrnl.exe***
ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
[code].....
Now, I am unable to understand what is the reason behind this even after much browsing. Also, the symbols are downloaded and saved in C:/Symbols. I am sure that these are working because some DUMP files which do not point to NTOSKRNL get debugged fine.
Also, one more issue I am facing that whenever I have to open another crash dump file immediately after closing one, the option for opening the Crash Dump gets greyed out -_-' . The only way to open another DUMP file is via closing and opening workspace and everything again?
I have recently purchased a laptop with windows 8.1. After I had to delete some search engines - apart from yahoo and google, I find that I am now unable to upload email attachments in my yahoo webmail and unable to upload photos in facebook. I don't know whether the 2 things are connected, I just noticed the problem after I had done this action. When I try to attach/upload I get a page telling me skydrive is unavailable, not the folders from which to chose file. All I can then do is cancel.
And btw, I had tried to get rid of the adware using adw-cleaner which hp had recommended but it did not seem to complete the action and after re-start seems to have vanished. I don't know enough to reconstruct what I did to delete the search engines, I don't think.
On my home network, I have my desktop, my HTPC (wired) and my wife's laptop (Wifi). The desktop and HTPC are bth running Win 8 pro. The laptop is running Win 7. All are 64 it.
Invariably I try to log onto my HTPC from my desktop and it says that I am unable to access the files. I then open up network and sharing center to check on the network password only to find that is has changed itself somehow. Even after I reset the password on both the HTPC and the desktop. I still cannot access my shared files on the HTPC from the desktop. The only way to share files is to get them from the HTPC which for some reason lets me access my desktop files.
The laptop is not really an issue. ONce I enter the new password I can access files on the desktop and print no problem. I guess the 2 issues are...
1) the random changing of the network password
2) the inability to access networked files FROM the desktop. The reverse seems to work flawlessly.....
On my old Win 7 and Win Vista and Win XP laptops I've had no problems opening and viewing my old MPEG-2 video files. My new laptop running Win 8.1 will not allow me to view them.
Windows Media Player will only recognize them as audio files - not video - though the sound will play. Real Player is the same - the application will open and begin playing a file but only as audio file. I've tried the built in Toshiba media player and it shows errors and won't open the files at all.
Again - these are conforming MPEG-2 NTSC 760X480 video file (old analog home movies) captured using an ATI video card dongle to connect to my video source and an old version of capture application ULead Video Studio. These files conform in every way to MPEG-2 standard/format and will run on all of our PC EXCEPT the new one running Win 8.
I bought and loaded a video editing application from Corel and it will open and play these files perfectly so why won't Win Media Player and Real Player recognize them when running behind Windows 8?