Windows 8 Hard Drive Crashed - Unable To Delete Files?
Oct 4, 2013
I have a TB drive and when I was trying to delete some files, it crashed. As a consequence, the recycle bin has some invalid information in it. If I try to perma-delete files in there, the system freezes. I try to restore files, it freezes. When I tried to restore files, it also asked me if I wanted to replace the files in the respective locations that it was restoring to, which to me means that the files are still there and its in some kind of limbo.
I'm sure this problem is at least somewhat related to the hybrid boot feature with the crashes. I dual boot with Linux Mint 15. I think that upon messing with some files on the TB drive and going back to Windows caused it to... well I'll say have a seizure. Now I've done chkdsks and it never seems to truly finish. It gets to the end, and sits there, and maybe even freeze or crash. But when I do a chkdsk I can usually access my files in Linux in read-only mode.
While, in Windows 8, I can still access everything perfectly fine. I can read, write, and do what I want normally so long as it doesn't involve anything with the recycle bin. Also, say I try to go to the files on the HDD that I tried to delete but are still there and delete them, it freezes crashes.
I've also disabled that hybrid boot feature and have attempted clean shutdowns and in some cases it would even freeze on shutdown. Also I've done both chkdsk /r and chkdsk /f with the only difference that one takes hours and the other doesn't.
I had Windows 8 32 bit installed on a WD5000AAJS 500 GB hard drive that died on me. I had a backup of it made using the free version of Paragon Backup & Recovery. Apparently there is something wrong with the disk image so I am unable to recover from it (spent the past week trying everything I can think of or find on the internet to get the image to work). Anyways, there are some files on the hd that I would REALLY like to recover.
I can connect the HD to another PC running Win 7 and it starts to spin (no noise or excessive vibrations). The PC sees the HD as an unallocated drive with 134217728 GB when I look in Computer Management. I read somewhere that this represents the largest possible size for a Win 7 HD (something like that - I'm sure I'm wrong, though). Anyways, I was thinking that since at least the HD spins and the PC can see it, there must be some way to recover the files off of it. There is a MySQL db on there that I would like to recover and some batch and vbscript files I would like to recover.
Recently i upgraded my system to windows 8..N after clean install i backed up the copy of my C drive (Includes System Image) to my external 2TB Hard Drive.. It took around 250GB of hard drive space..Now since i am running out of space i decided to delete the back up copy from My hard drive.. I deleted WindowsImageBackup and all associated files using control panel..But around 150GB space is missing(not visible) from my external Hard Drive..
As You can see from attached pic that 125 GB free out of 1.81TB..But size of all files including hidden files is 1.53TB..
I need to delete a recovery partition off my second hard drive. I've seen this link: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista - My Digital Life but it's for Vista and the final command "delete partition override" doesn't work in diskpart. It comes up saying "The specified command or parameters are not supported on this system"
Yes, I really do want to delete the recovery partition because it's on my secondary HDD, I still have the recovery partition on my C: so I'm really not losing anything ....
I wanted to delete some audio tracks from a cd I made.They won't delete.
The Windows 8 message says to go to Disk Cleaner and chose "D Drive " from the drop down menu, however, there is NOT Drop Down Menu and the only thing Disk Cleaner goes to is to clean files on the C Drive.
Doesn't microsoft even know how its lousy operating system, which is universally detested, works?
What a disaster Windows 8 is., At least I got a older type starter button through the MIT guys, which makes it more palatable. Oh yeah, the Windows Explorer also leaves a lot to be desired.
Alright, so I was in another OS, and decided to copy over some files. The problem is when I got into Windows it gave me disk errors. So I allowed Windows to repair them automatically, and everything was dandy. But the files that were transferred are nowhere to be seen on both Operating Systems, but the disk space is still being taken up (About 100GB) so how on earth do I get rid of this phantom space?
I have a Western Digital external hard drive. Model WD5000C032 500GB. It's an older device that was working just fine on my Mac (I don't know what OS it was running and do not have access to it any longer). I have brought this HD with me and am now trying to use it on my Windows 8.1 lap top. When I plug it in, the device is not assigned a letter. I can search for it in disk management, but it is uninitialized. I have right clicked on the drive to initialize, and receive an error message "the specific disk is not convertible because the size is less than the minimum size required for GPT disks." I searched and suggestion is downloading and using Partition Wizard. I downloaded the program and opened the wizard, but it does not see my hard drive. The screen shot will display as far as I've gotten.
How to clean up the windows containing hard drive from everything but the system files, because I upgraded my windows and not installed it to a clean hard drive. I have a lot of unneeded files. How to do it, without reinstalling windows.
My old Sony Vaio broke the other day, so I've just got a new laptop. The Vaio was Vista, but now I'm on Windows 8.
I'd been backing up my Vaio to an external harddrive, but all I ever did was run the backup and let it get on with it. So for example, within the external harddrive now it just has a list of the dates I ran a backup, followed by 'Backup files 1', 'Backup files 2' etc. I'm hoping these include some of the documents/files I had on there, but I can't be sure. What exactly will have been backed up here?
I've been trying now to restore these files on my new laptop, but I can't seem to find a way. Is it possible?
I have windows 8.1 and c-drive is system drive. Programs are mainly installed to C: but I have also some programs installed to E: Program Files, Program Files (68), Program Data etc . Now I want to to move E-drive contents to another hard drive (all files stored on e-drive).
I think the safest way is to reinstall all programs, but I don't want to do this. Also it is possible to move files to new partition which has another drive letter than e: and create link, but this I don't want to do either.
Can I do it like this:
1) Change e-drive letter to x 2) Create new e-drive to another hard drive 3) Copy e-drive contents to new e-dive 4) that is it?
Can I use normal copy - paste to copy all files? I think register references are the same after these steps because drive letter and content of the e-drive are still the same.
Does my method work? It sound so easy to do. Is it "too easy"? Does it have any risks?
My old vista laptop died so I upgraded to a new laptop pre-loaded with 8.1. I tried to load some files including photos from my Seagate hard drive but I get a message to the effect that they are not supported. How can I download the other files?
Basically at the moment i am using Windows 7 Home and will be upgrading to Windows 8.1 in about a weeks time. I currently have Windows 7 installed on a 60Gb SSD and i have a secondary 500Gb Seagate Barracuda for other files. What i am wondering is if i clean install Windows 8 onto the SSD only will i still be able to use the 2nd drive in Windows 8? Basically this drive has a fair amount of music / videos etc and i would like to make to make sure i can use these. I would like to do a clean install and not an upgrade btw.
I have put together a PC for the first time. It' POSTs and All is well. I have installed a SSD 250G drive as my primary drive with windows 8.1 install. Also have a 1.0 Terbyte Hard Disk for storage. How do I make sure that all data files(downloads, applications, etc) are sent to the hard drive.
I'm trying to recover lost partition and files from external USB hard drive (Maxtor Portable 250GB). I'm using disk Internals sofitware and the software finds the files, but when I try to save them on the drive, each time I get a watchdog, or another BOSD error.
I recently installed a HD (WD25EZRX). it's been operating normally for about 2 days.
i was using my comp when i saw an alert that said something about a hard drive error and that my PC needed to be reset to fix it. so i reset the PC and saw another message saying something about restoring to a previous point. i wasn't really thinking and i clicked OK.
upon reset, i noticed the HD in question was now showing up as 1.36TB (it's a 2.5TB HD). it also has a bunch of files from another HD, which is odd.
i've used Error Checking under Tools of the HD's Properties, but the results showed no errors.
i'd like to regain the "lost" capacity w/o having to reformat my entire HD.
System Specs:
Win 8 Pro with Media Center Intel Core i7-3770K CPU Samsung 30nm DDR3 1600 RAM 16GB ASROCK Extreme4 Z77 Motherboard ATI Radeon HD4650 Samsung 840 Pro 128GB SSD (OS)
I have a laptop that crashed over the weekend. I need to do a restore on the computer but before I do I need to get the documents and pictures off of the drive. I've taken the drive out of the laptop and plugged it into my Windows 7 desktop using an external USB bay. I hear the computer detect the drive but it will never show up as a drive. If I look in Computer Management it shows up in there.
I was moving my default user folder locations, where I have managed to move 'My Pictures' and 'My Documents' successfully. however when I was moving Documents folder I made a mistake of selecting the whole 'e:' drive as the target location instead of 'e:download'. As I don't want the E: to be the target location I have reverted it back.
Now for some reasons I am not able to delete Downloads folder that I created manually in E: drive. That folder is hidden, it doesn't show even when I select the option to show hidden files and folders. However the files in that Download folder are showing up when I search them.
To open the 'Documents' properties I selected one of the file from the search list, right clicked and selected open file location. so finally when I saw the properties of the folder it says hidden, and it is not allowing me to uncheck it. I tried changing permissions of the folder but still no luck. I even used command prompt to delete that folder, but it says access denied.
All I now need is I want to delete the folder 'Download' in my E: drive. I am the admin of my windows 8 pc.
Ok maybe and it is not a terrible bug but when i try to delete any files from folders the files delete.
But when click on referesh from desktop context menu the files i have deleted show up again when i try to delete them again the files delete again and after 3 or 5 min the files are gone which i have deleted.
I was wondering if there is a way to entirely remove windows 8.1 and keep all application and files and then reinstall windows 8.1 pro freshly? If its done should i use MTK or kmspico to activate it?
I'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.
I have a 2TB Western Digital My Book Essentials, it's filled with tons of old photos, movies, docs, games, and I'm scared to think of what else. The SATA to USB connector broke on it, so I took the drive apart and put it inside my computer. I opened up device manager because it wasn't showing up automatically and the 2TB is showing up as unallocated, I'm freaking out now because I'm scared the data was somehow deleted.What do I do?
edit: I realize also this isn't directly related to Windows 8 (besides the fact it's the OS I'm on), but I don't know where else to post it. I'd also like to say that I had a really deep feeling the drive was going to break continually for about two weeks before it happened, so if you have a similar feeling about something, don't ignore it!
Recently I bought a new Asus Netbook, it has free DOS OS, I have installed windows 8, there were 3 partioned and I selected one of the drive. The problem is my C Drive (Boot Drive) is 40GB, D Drive is 13 GB, remaining all spaces are allocated to E Drive which has DOS OS. In Disk management my E drive is showing Active System, Primary Partion. I wanted to resize my D and E Drive. I tried to delete my E Drive but getting error message like windows unable to delete E Drive. Is there any way to delete this drive.. I want to join my D and E after that I want to re partion 90 GB's 3 additional partition.
I know there is good software out there to clone/image my hard drive and restore it to a new SSD drive. I'm just wondering though, since my laptop is brand new, I made a full recovery to a USB drive and included the OEM recovery partition.
Couldn't I just swap out the old HDD with the new SSD and boot with the recovery stick and do a full recovery back to the new SSD?
Also, however I do this, recover or image backup/restore, do I need to do some type of SSD alignment? I can't find a clear answer on that.
I have downloaded some applications, and it won't allow me to delete them (it keeps saying the file is open in that application--I checked task manager, and there's nothing there). I read that a program called Unlocker can work, but when I try to run the setup, nothing happens. This is happening for all applications in my Download folder.
