Windows 8.1 Custom Power Plan Keeps Resetting CPU Usage
Jan 26, 2014
I have an Asus K55N-DB81 running windows 8.1 and I decided to create a custom power plan. So I created one and went to "Advanced Power Settings" Option and then went to the Processor Power Management to change the Minimum CPU usage to 1% and the Maximum to 50%, I click Apply and Ok and X'ed out. I Closed the Lid, Came back to my computer and I checked to see if my CPU settings Changed back to 100% Minimum and 100% Maximum which it DID. I keep Changing it back but it keeps resetting itself ...
Installed 8.1 about a week ago and I'm fairly happy with it so far (after removing charms, going straight to desktop etc) however I have a few minor problems.
Firstly my windows keyboard shortcut key is not working (Logitech G15)
Secondly in power options there are no plans that I can change, if for example I try to create a power plan I get the message "Your power plan information is not available". Tried sfc etc but no problems are detected.
Finally it just seems slower in some respects vs win 7 x64 ultimate, especially booting up. SSDs are all trimmed and aligned and all drivers are installed.
I recently reinstalled Windows 8 completely because I bought an SSD for in my laptop. I exported my power plans I used before the reset (when Windows was still on the HDD) and imported them again after the reset. In every power plan, Windows should go to sleep mode when closing the laptop lid, but that's not what's happening. Instead, Windows shuts down entirely, but the power light on my laptop indicates it's in sleep mode (flashing slowly). I also tried the built-in power plans (after just adjusting the appropriate setting), but the same happens. When i change the setting to do nothing (instead of going to sleep mode), it acts like it should: it does nothing.
I refreshed Windows but even now I recently reinstalled Windows 8 completely because I bought an SSD for in my laptop. I exported my power plans I used before the reset (when Windows was still on the HDD) and imported them again after the reset. In every power plan, Windows should go to sleep mode when closing the laptop lid, but that's not what's happening. Instead, Windows shuts down entirely, but the power light on my laptop indicates it's in sleep mode (flashing slowly). I also tried the built-in power plans (after just adjusting the appropriate setting), but the same happens. When i change the setting to do nothing (instead of going to sleep mode), it acts like it should: it does nothing.e problem still remains.
In the future I'm planning to build a new computer to replace this old hunk of junk and I'm curious as to one thing as I'm not entirely sure on this. Just how safe is using the High Performance Power Plan in Windows 8.1?
You see, my current rig is running an old i5 661, normally on the Balanced Power Plan on an old ASUS P7P55D-E Deluxe Motherboard with a GTX 660 and 4GB of RAM on 32-bit Windows 8.1.
But my future plan is to use an i5 4690K with a Corsair H110 All In One Water Cooler for CPU Cooling on a Z97 Motherboard and 8GB of RAM in 64-bit Windows 8.1.
I'm hoping to get quite a bit of performance on this next computer cause hey... I'm planning on using it for gaming and such. But also web browsing and chatting with friends. I hear how High performance is suggested for 'optimising' Windows 8.1 but how much safer is it...
And how much of a performance increase could I possibly see in comparison to the old rig?
I have a Dell XPS 13 and the F3 button has a battery sign on it. Pressing it brings up some battery meter property . Is there any way I can change that to toggling between two of my Power Plans ("Power Saving, High Performance") each time I press?
Is there any way to remove old not needed advanced entries in the windows 8.1 power plan settings. Here is a picture of what I'm talking about. Highlighted in red is what i don't need anymore any way to remove it?.
For the longest while I've had issues with my Windows 8.1 ignoring my selection of power options. By this I mean by CPU will stay clocked at 1.4GHz when it should be hitting around 2.3GHz when I set to high performance from power saving mode.
In the past it's cleared up by itself or through reboots but I'm thoroughly pissed off and I want it fixed.
I just had my laptop install Windows 8.1 tonight. It's a clean install, by the way. Now the problem is I noticed that every time I restart my laptop it's power plan reverts back to "power saver", I had it set on "high performance" before. I own a Samsung laptop, model is NP535U3C-A01, Series 5.
Why Plan Settings and 'Advanced Power Options' configuration differs from each other?
My plan Settings sets the time to sleep with computer plugged in to 25minutes whereas the advanced power options has it on 180 minutes. Same applies to other options of the power options.
I was wondering what this mess is all about? I restored both to default and set the advanced to 'Never' and manually configure the Plan Settings.
After installing the 8.1 Pro update on a fresh install of 8 Pro, I only entered the Power options one time: to change the "high performance" plan to never turn off the display. (as I usually do when setting up windows)
Today, I noticed my display turn off after a few minutes, so I went to see if something had changed my power plan. To my surprise, I have found that I now have over FIFTY copies of the High Performance Power plan! Many of them have different settings in minutes regarding when the display shuts off, and when the PC goes to sleep.
I can't delete any of them, as windows apparently considers them ALL as default plans. If I didn't create these plans, how did they get there? How can I delete them? I know deleting default power plans is dangerous and can cause errors so I just want to avoid another re-install of windows.
I own my MSI laptop since last october. I have random BSOD's, I would say 1-2 per week, and especially when I am playing left fo dead 2 (2-3 per hour), and when I turn the high performance power plan on (5-6 per hour). I have a killer network card, and I heard that this card was the cause of a lot of BSOD. But I do not see the link between l4d2 and the high perf. power plan. I always keep all my drivers up to date. This is very annoying, I alwas leave my laptop on to download games on Origin/Steam, or to do other task and when the BSOD occurs, I am just wasting my time...
Every time I turn my laptop on, I lose my thumbnails and it has to reload them. I've tried today to go through a few refreshes/reinstalls, and I'll occasionally be able to keep them, but then I just start losing them again.
I have a new laptop with and therefore learning Windows 8. my concern today is in the taskbar I have the touch keyboard always on my taskbar and the English keyboard settings. I go into taskbar properties, and I have tried every conceivable option I can think of to stop this unlock toolbar, apply , save, uncheck settings apply, save, lock toolbar apply, save. etc from my reg acct as well as from within admin acct. But still after every reboot, they appear back again.
So I reset my pc to factory setting and everything went good but when starting either internet explorer or google chrome it seems like they saved my browsing history.
I used the same email account that I used before the resetting.
Is that good? or my pc wasnt resetted at all and there are still some files that weren't deleted.
Plus I found some google chrome files that remained in a folder and I click on one of them and it brought me to google chrome official download page.
Asus laptop Windows 8 stuck at Resetting PC 2%, Only option is hard reset??
This laptop belongs to my Grandma (87 years old). **She did not make the recovery disk for the computer.**
I got to the Recovery options and it has been stuck at 2% for about 6 hours. Asus OEM X55C Windows 8
NOTE: Yesterday I told Grandma I would see what was wrong, but it would bug out, freeze, etc when trying to log into the administrator. The screen would go totally black and then freeze. So, the computer has shut down improperly several times.
However, it did repair the disk last night before I attempted this recovery.
I have a new Lenovo G580, came with Windows 8. When it first arrived I mistakenly added new partitions (repartitioned) to the hard drive. (Actually it should not be a mistake - It should allow me to do so, its my choice.) . After I repartitioned I realized that reinstalling partition of Windows 8 no longer works through onekeyrecovery of Lenovo. All the partitions are there - including the hidden partitions arrived with PC - all the recovery partitions but it does no longer reinstall Windows.
I called Lenovo - I believe they will send me the new recovery disks, if so. But until then I am trying to find a solution - and I learnt that there is a feature of resetting windows in the Windows settings "remove everything and reinstall windows."
I will use this option and make a recovery hidden folder and ISO myself with this fresh install of Windows with "paragon backup" etc.
But.... I need to know if this resetting PC option is really safe - If since the time I used Windows 8 until now, some viruses and malware spreaded into my computer - would these have the possibility to inject themselves to windows reset feature and the files it will use? As these should be in my C: drive I believe this is a possibility.
I will use this image after reset always for reinstalling Windows 8 so I have to make sure there are no viruses or malware entered into it.
trying to reset to factory settings my Dell Inspiron 660s that uses Windows 8. Some how my ex had downloaded a interface to make Windows 8 look like windows 7. It has virus on it that I just want to reset it. I have tried to reset thru going thru change pc settings-to general-to recovery. It gives me an error code of 800....???. So I restart it, hit F12 brings up a boot window where my options are Boot Manger (clicking on this takes me back to my desktop) Boot Setup is the 2nd options, then Diagnostics (which I have run and says nothing is wrong then takes me to my desktop) then I forget what the last option is.
Reset password on Surface Pro 2, they haven't used it for a month and could not remember last password they used. Built-in resetting option won't work because it will erase all user files they have on that tablet. I usually use Nordahl password recovery tool when i need to blank or change forgotten password, it worked fine for me on regular non-tablet Windows machines, both options - CD and USB boot.
I'm not familiar with Surface tablet, so i did online research on how to boot Surface from USB, tried all options, but was not able to boot it from USB stick (i used 3 different USB 2.0 sticks).
Here is what i tried: I was able to get into boot screen and disable Secure Boot Control, then able to get into Advanced Options screen, checked USB drive option. Tried 3 different USB sticks with 3 different password recovery software - no luck. Any experience with Surface Pro 2 password recovery? Either i'm doing something wrong, missing a step, or maybe older USB sticks don't agree with Surface USB 3.0 port? Should i try to plug in external DVD drive and attempt to boot from it?
Had this problem after using advanced system care,it screwed up my whole pc.Did a reset and refresh through the window 8 ulilities but problem still persist.After resetting the pc,resetting tcp/ip stack success once but failed onwards after rebooting.Is this normal or something is wrong with pc?
Recently, when right clicking on the explorer icon in my task bar I noticed that all of my pinned folders and recent places had disappeared. I looked in my recent places folder and found that that was empty.
I also realized that other programs had lost their extra jump list options, for example Skype, which when right clicked should give the option to quit Skype, but instead only had the basic 'close window' and 'unpin' options. The Skype jump list reappears once I restart Skype, however the explorer jump list is still missing when I restart my PC or explorer.exe
I have tried deleting the files in C:Users\%USER%AppDataRoamingMicrosoftWindowsRecentAutomaticDestinations. Then when I restart explorer.exe and pin things to my explorer task bar icon, everything is fine...
Until a little while later (for reasons I cannot explain) the jump lists disappear, even though their files in AutomaticDestinations still exist!
I have only one administrative account associated with my Windows 8 PC. I have this said account password protected yet my child can bypass the logon screen by merely resetting the PC. What kind of security is this?
How can I go about setting it up so that a password is require regardless of whether the PC is reset or not?
How are we suppose to go about keeping our children from unmonitored PC access if they can simply reset/shut down the computer and bypass it?
I keep loosing the Internet, every few days, and I go to my adapter settings, disable, then enable, and it comes back on. My adapter ia an Asus PCE-N15 Wireless LAN PCI-E card. I have a Lenovo H415 desktop running Windows 7.
My laptop (Dell Inspiron 2013 64-bit) was playing up today and instead of restarting it, I foolishly clicked on the option to "refresh the pc". i know this would remove all my current programs. I decided then to do a System Restore. Now, all my programs are back, however, the majority of my programs such Firefox, Microsoft Office and such will not even open! I would just like to know if there is anyway to get these programs running again without having to reinstall them all? Furthermore, would I need to reset or refresh my pc as I can not uninstall old programs via Control Panel?
My parents bought a PC last year running Windows 8. I set up there talktalk E mail accounts in the Windows 8 Native E mail client from the Mail tile at the start screen without any problem. All worked fine until recently when in order to download an app they had to register an Outlook E Mail address. Not sure if they had updates applied as well but they had to start logging on to the PC at boot up every time using a password. In an effort to resolve this they restored the PC to an earlier time which has cured the logging on issue (ie no password required) but when they access the Mail tile from the start screen it is an outlook E Mail account that comes up. I have tried without success logging into this outlook account and then adding the talktalk accounts. I even tried using my own account but could not add that either.
All they want is to click the Mail tile and get there talktalk accounts to come up just as before (no outlook or hotmail or anything else). Is there a way to reset the E Mail client/tile in Windows 8 back to what came with PC so that I could set it up just as I did when the PC was purchased. They are running Windows 8 and do not wish to restore back to factory settings as they have a few other bits and pieces of software installed.If they upgrade to Windows 8.1 will they be forced into using a password to log on every time ?
My PC freezes when I'm just browing the web. It doesn't happen when I'm decoding a video, or when I'm playing a game, or running an emulator. It always happens when I'm browsing, or during idle. All of a sudden there's a slowdown, and the right mouse click menu takes a while to appear. When the right click menu appears it's kind of transparant/greyish and then it fully appears but none of the options work. For example I right click on the desktop and click task manager, but it never appears. I can minimize/maximize windows but cannot close or open new ones. Then it's completely frozen, I can't do anything other than move the mouse around.
Yet Metro UI still works, somewhat until it slows down and completely freezes again. I cannot restart or shut down PC, I have to do it manually by holding down power button or pressing the reset button.
I get no error messages... I used to have malware antibytes installed but removed it. I have all the drivers up to date (motherboard, sound, graphics card, intel, and windows updates of course).
Deleted graphics drivers and installed latest ones and the problem still persists.
I have dual monitors set up, one at 1920x1080 and another one at 1600 x900 on DVI from graphics card. It's happening very frequently now, after about 15 minutes, no matter what I do.
I created a custom refresh image the day before upgrading to 8.1. I am having shut down and sleep issues with windows 8.1 that I don't have time to troubleshoot any longer and I wish to go back to win 8 for now. I went to check that my image was there and active and this is what i get:
It showed successful when I created it? I can find in in the location that is it supposed to be:
and:
Now I'm stuck. I don't want to use the factory image and reinstall everything, and I can't cope with the bsods and hangs when trying to sleep or shutdown ( I have tried every option in that massive thread about windows 8.1 not sleeping ) ...
Is there any way to set up a hotkey using the windows logo button in sequence with another? for example "Win + Z" or "FN + Win". I have classic shell downloaded on my windows 8.1 laptop, and I want to set up a hotkey for the metro start screen. I'm aware of how to make a hotkey through a shortcut's properties, but there's no way to use the windows button as one of the keys.
I have a windows 8.1 laptop and I'm trying to install this theme to it right now. I'm new to custom themes but I've already used UxStyle to patch and ran the RIbbon Disabler as per the instructions. However, for some reason, whenever I install themes all I get is the basic colors that the theme is supposed to be, as if I just went under the personalize settings and changed the window color to white. There are no rounded windows as shown in the image and the minimize, restore down, and close buttons look the same as always (in the picture they are shown as grey & red circles). I'm probably missing something because I'm so new to this, but I've followed the basic instructions for installing themes.
