Cant install windows 8, it gets halfway through then I get the blue screen and message irql not less or equal, was wondering how to solve this? I am trying to install the 64-bit version and have an acer aspire with a 1.3ghz processor, 4gb of ram and 181gb free on my hard drive.
View 9 RepliesI was upgrading from windows 8 to 8.1 from the windows store but when the computer was updating the pc, the computer when off. That was when i realised i forgot to on my power supply. When i tried to on it, it gave me the 0x0000225 error and 0x000000f error when i tried to use a repair usb (win 8)
The model of my computer is ASUS N550JV.
I had win7 and Windows 8 on my system. then I deleted win7 and installed a fresh copy. the boot screen is now traditional black and white boot screen where we have to choose OS. I want Windows 8 blue boot screen back.
View 5 Replies View RelatedAfter BIOS page passes, it loads for 10 seconds and crashes. Error screen disappears too quickly so can't take note. This is a new laptop.
Have tried 64 bit Windows 8 ISO and from Flashdisk.
LENOVO IdeaPad V480 161
The problem I have now is when turning on my laptop it stays at the Dell logo for about 5 minutes before continuing to attempt to load windows, this is in UEFI mode. In legacy mode, it loads past the Dell logo in seconds, but this does not load windows.
I am trying to reinstall windows with the Dell windows 8 Home premium disk. When the disk finally loads, it just stays on a black screen, and I've left it for about an hour and it will not load.
I have tried using Hirens boot CD (USB) to load Mini windows xp, but that does exactly the same. I can load Linux from the usb but not windows. However, I have never used Linux so I cannot do anything in Linux to attempt to fix it, as I do not know what I'm doing inside Linux.
I'm trying to install windows 8.1 pro,I have tried USB and DVD. Both of which give me a black screen after the windows 8 loading logo.
View 9 Replies View RelatedThis is a Windows 8 OEM CD install, on an i7 x64 system. I have tried this with both UEFI and legacy modes.
I cleaned the drive and allowed setup to partition and format how it sees fit on an Intel SSD.
The system copies files, sets them up and reboots.
The blue windows logo is up for a minute, then the screen (not the PC) power cycles (probably due to a resolution change). It hangs there on a black screen. There is a mouse cursor that responds and the num lock toggles on the kb, but nothing else. CTRL-ALT-DEL does nothing.
I tried to update the latest windows 8.1. I got the installation package but when it started saying looking for updates on this computer it said that it was not applicatable on this computer.
View 7 Replies View RelatedI just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
I've having an issue that I think some ppl had, windows 8 crashing going to blue screen of death or blank black screen and then it restarts by itself, also I have noticed that it says repairing disk in D:/
I have one SSD 120gb in the C:/ which it host the operating system and some minnor programs, in a HDD which is my D:/ drive there I have my games.
ASRock 990FX Extreme 9
AMD FX 8350
Kingston Hyper X 120GB SSD
WD black 500GB HDGB HDD
Corsair Vengeance 8gb Ram 2133Hz
Windows 8
I get a blue screen error of "driverirql_not_less_equal" when my laptop monitor dims.
Specs:
OS: Windows 8 Professional (64 bit)
Intel i7 2640M
8 Gb Ram
1T HD
The attached screen capture is the location of my error.
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
View 3 Replies View RelatedMy PC was working fine before today, until I used Ultra UXtheme patcher for Windows 8 x64 and then applied a custom VS for Windows 8.
After a restart, Windows Explorer was not launching, so I opened task manager and did a sfc /scannow. After a reboot, I get to the Windows 8 boot menu (I have a dual-boot on this HDD with win7), and then the screen just turns on and off every few seconds, with the numlock light flickering with the screen.
I tried using the automatic repair, both from the boot menu and from a backup USB, but it does not detect anything. and I still have the same issue.
I restored the backups of uxtheme.dll, uxinit.dll, and themeui.dll, but that didn't work either.
Attached is my ntbtlog.txt.
There is no BSOD, the HDD keeps on spinning a few minutes after boot, and the numlock keeps on flashing. Anything else I can do from my win7 install? I'm currently trying to delete the theme.
Deleting the theme doesn't work, safemode doesn't work either. It seems to be a driver issue, but there were no driver updates when it was working?
Im trying to install Windows 8 (Not 8.1) but it gets stuck at the booting screen (Where setup shuold load files)
My system specs are on my profile.
Just had this new laptop running windows 8 and its an Acer.When I select the photos tile on the screen it goes to another screen which is black with a blue square icon and underneath it tells me that there are no files or folders in this view.There are photos in my picture folder as I just put then in.But if I go to the other method and select the My picture folder the photos are there.
View 7 Replies View RelatedI'm installed Windows 8 on my desktop. The Windows 8 Upgrade Assistant indicates that this software will install OK. It was NOT flagged as a problem.
However, when I went to install it, there were warnings that it wasn't supported and when I try it, I get errors about the registry.
How to use VB.NET, I don't understand it, and I'm used to VB 6.0. Is there a way to use VB 6 in Windows 8?
My laptop originally had Windows 8 installed on it on an SSD and an HDD. I have since wiped the drive clean. But now, I need to get Windows 8 back for work. How can I replicate the original layout with Windows 8 being put on both a SSD and a HDD. The nature of my work involves a lot of CAD software usage for projects as well as research and the like. As such, I would like for such software to be located on my SSD for faster speeds.
View 9 Replies View RelatedTried numerous times to install the update but keeps hanging when at "Applying PC Settings". It usually stops at around 84%, eventually the screen will go black only showing the cursor then finally it shows the bsod. The bsod says: driver power state failure.
View 2 Replies View Relatedi have a dell 5520 inspiron laptop which i bought 2 months ago . Yeasterday while starting the laptop , just after the lock screen , i pressed a key on the keyboard, but the login page was not visible ,i could not access my account .
View 2 Replies View RelatedOEM keys pre-installed in the my laptop as i too want to clean install windows 8.1 also my os was windows 8 Single Language and i have a 8.1 Pro ISO
View 2 Replies View RelatedI have Windows 7 64 bit Ultimate installed and activated. I am trying to upgrade to Windows 8 and the upgrade assistant tells me it needs at least 2gb when I have 8gb and Windows 7 sees and knows I have 8gb
I am thinking it could be my bios, but it's already at the latest version
Here are some photos from my bios, so you can tell me if there is anything I need to enable.
These are photos from my bios. I need to change to get this to work.
I bought a HP notebook with windows 8.1 installed , but no installation DVD . In order to create one I downloaded from Microsoft , ( from windows.microsoft.com/en-us/windows-8/create-reset-refresh-media ) the Windows 8.1 Setup ( file OSGS14-WindowsSetupBox-32bitand64bit-English-4141408.exe ) and ran it but always receiving the message : we can't connect right now . I have tried more than 20 times and failed.
View 2 Replies View RelatedI tried to install Windows 8 Pro on my Dell PC, but I didnt know the clean install was the best way to go and now my computer will not boot to the OS. It boots then goes black.
View 3 Replies View RelatedI am trying to install the Windows 8 DVD over the current XP OS, but in MyComputer, the DVD Drive isn't listed in the tree view. Device manager says it's installed properly and functioning well. My Q is this: how do I run the installation DVD from the DVD drive using the Command Prompt. On Windows Start-up I hit F12 to access the boot order, and when I arrowed down to the DVD drive and hit ENTER, Windows would just jump straight to the XP start-up process. It's like something won't let me access the DVD Drive.
View 9 Replies View RelatedAcer laptop already has Windows 8.1 installed. It has a MBR disk. My USB Flash Drive won't boot from it but it does my my desktop so not the USB flash drive.The flash drive was created for UEFI or MBR boot using Rufus. I tried the tutorial in sevenforums to convert the Acer to GPT but it says the boot drive is in use and can't. I tried to boot to a Command Prompt but that gives me an X: drive and I can't change it to C prompt. I have done this before from a boot drive and it worked but won't on this machine. How can I get this converted from MBR to GPT??? How can they make that tutorial work for them? They are doing it from within windows there??? This machine BIOS has nothing for legacy or UEFI or secure boot for sure. Is my only option MBR then? If it is what do I make the flash drive with as Rufus option says for UEFI or MBR but won't boot this machine. Yes I have it to boot first but it lights up but goes straight to windows.
View 4 Replies View RelatedOK, I have an Avatar Pitbull Gaming Computer. I have a blank ssd and i have the WIM file and WINPE on a flash drive trying to install from the flash drive. When I boot to the flash drive i get a black screen that says operating system loading??? There is no operating system so im at a loss.
View 5 Replies View RelatedI installed windows 8 pro and here are the issues I am having.
Every time I install (Pro Disk) when it finishes and restats, it goes right back to the beginning of the install Once I can get it installed, once the first screen spins, it stays black, but if I sleep and wake it, it goes right to the sign in screen-weird.
Then, it says no updates have been searched or ever installed, when I search I get the Error Code 80248007 cannot update.
My PC got into a loop where it kept trying to install Windows 8, crashing and trying again.
Somebody advised using killdisc to wipe clean, however, I can't boot from the Windows 8 disc to install because hard drive is not found.
What steps do I need to follow in order to get it running again?
We got a nice Samsung Series 5 Ultrabook and all it needed was a hard drive. Now.. here's the problem.. I'm good with a screwdriver or a soldering iron but software isn't my strong point.
It's a genuine Windows 8 machine and as I understand it, it will have the genuine COA embedded in the bios right?
Now I've tried installing Windows 8.0 64bit OEM which I believe is the correct uk ISO, and I've tried the Pro version also but with both, neither seem to pick up the embedded COA and therefor do not activate.
Am I correct in thinking that it might be because I have to use CSM mode in the bios to get it to recognise my installation media? If I had a UEFI version would it make any difference?