I love Metro, but I think booting into it is worse for me than if the Start menu were hanging open everytime you booted 7. I have to say this is an additional step that makes it feel a bit forced, a bit in the user's face. How to go straight to the dekstop?
View 9 Replies
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
View 3 Replies View RelatedWhat should i type to enable the metro boot?
View 9 Replies View RelatedI have a problem where I turn on my pc and get error code 0xc0000225. It's and Acer desktop I bought July (2013) for a little B-Day present . But now it stopped working. I can't take it to a repair shop because
1. I'm not a fan of them
2. They tend to take like a week :I
I need it soon I'm only using my other laptop. I make like intro/outro's for people and I have one person who asked me a week ago which I feel bad about. Plus all my school work is on there and my dad also has his job documents nothing can be erased on there.
I tried to set up a dual boot, Windows 8.1 and Linux Zorin 8 on a new Lenovo desktop. I setup the partition first in Windows and then loaded Zorin per the instructions here: [URL].....
Everything seemed to go OK but in the end I didn't end up with the grub boot loader, so I can only boot into Windows. Now I ended up loosing 20% of my hard drive which is now unallocated space that I can't figure out how to reclaim into my hard drive. I tried deleting the partition but it's still there and there was no option to expand volume.
I upgraded to the CP a few days ago and just noticed a huge problem. The "Show Desktop" tile that is normally on the start screen be default has gone missing. I can't figure out how I got rid of it in the first place, but is there some way to add it back?
I have changed the title to more accurately reflect the problem. A bunch of the features that come with Windows 8 CP (the tablet friendly Settings page, Remote Desktop, the show desktop tile, The Windows Store, etc) all vanished shortly after I installed Windows 8. I tried reinstalling and the same thing happened again.
There have been a lot of questions about how to boot directly into desktop and avoid Metro. My question is just the opposite. When I'm in Metro and I open an app, it first brings up the desktop and then the app on top of it. I would like to open an app without opening desktop. Is there a way?
View 7 Replies View RelatedBoot Direct to Desktop. I found this in a Windows 8 book in the Start Screen Store. If you want to boot directly into the desktop without passing thru the Start Screen
-Go to the start screen & type in schedule to search for Schedule Task in Settings.
-Click on Task Scheduler Library in the left pane, and select Create Task in right pane.
-Name your task something like Boot to desktop.
-Now select the Triggers tab, choose New, and use the drop-down box to select starting the task At log on.
-Click OK and go to the Actions tab, choose New, and enter explorer for the Program/Script value.
-Press OK, save the task, and restart to test it out.
I've had Win 7 Pro on my laptop for over a year. I installed a 2nd hard drive to it recently and today I installed Windows 8 Pro on the 2nd hard drive. It's been a roller coaster of good & bad luck.
The first install went fine, until I tried to install the Windows 8.1 upgrade from the Windows store, then things went bad and I had to go into Windows 7 and eventually delete the Windows 8 volume and change it from MBR to GPT because of UEFI (no secure boot enabled). What a stretch of error messages telling me I can't install Windows 8 on the blank hard drive because it was or wasn't MBR or GPT, or the automagically made partitions weren't in the right order.
After spending over 7 hours twice in a row installing Windows 8, I finally find out that there's no boot option for Windows 7 anymore.
The only clue I have is to use a Windows 7 repair disk and use diskpart.exe and make the Win 7 drive "active" but that's a little foreign to me at this point.
I'm looking in Computer Management / Disk Management from within Windows 8.
Disk 0: SYSTEM D: 438 MB NTFS (lengthened from 199 MB with EaseUS because Acronis 2014 thought it too small while crashing), Healthy (Active, Primary Partition); Win 7 E: 930.98 GB NTFS Healthy (Primary Partition); HP_TOOLS F: 102 MB FAT 32 Healthy (Primary Partition)
Disk 1: 300 MB Healthy (Recovery Partition) {no letter}; 100 MB Healthy (EFI System Partition) {no letter}; C: 931.00 GB NTFS Healthy (Boot, Page File, Crash Dump, Primary Partition)
And several other external disks which don't deserve mention today.
I'm using start8 and dual monitor setup in extended mode. Is there a way to keep the metro start menu up on 2nd monitor while have a browser or another program open on the 1st monitor.
View 5 Replies View RelatedIE Metro tile is missing from my metro start screen. It's not in the 'all apps' list either. when I go to program default, it is set as the default browser. I went through all the checks in the tutorial on here, but at best, I can only get the desktop IE tile to pin to start. I would rather have the metro version tile on my start.
View 2 Replies View RelatedFirst, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
Late last Fall I bought a new Desktop, an HP H81414, with Windows 8 installed with the intention of installing Windows 7 on an SSD. I migrated Window 8 to an SSD, removed that from the system, installed new SSD and put Windows 7 on it. Both worked fine. I wound up with 2 SSD's. capable of running on the EFI BIOS machine with Secure Boot turned off. I later bought a new laptop with Windows 8. I found the Win 8 with Classic Shell to be very acceptable.
What I would like to do now ,if possible, is to mount both SSD's in the HP case and switch to either one of them at boot.
How would Microsoft suggest an Intel 3600/Atom 2800 user running 8.0 however incapable of running Metro apps or accessing the store update to 8.1?
Machine manufactures, Microsoft and Intel have not taken responsibility for creating video drivers capable of running Metro apps on these Intel 3600/Atom 2800 recent machines, they pass the 8.0 Windows compatibility check and were advertised by manufactures as being Windows 8.0 ready.
Having already purchased machines and Windows 8.0 we feel somewhat discriminated against, and cheated out of our investment once again?
A coworker spent the entire day getting a Windows 8 machine up and ready for imaging. As part of the process, he went ahead and let it update the metro apps from the store.
Big mistake: Apparently updating Metro apps breaks sysprep;
Sysprep giving "fatal error" -- but *only* after updating Metro apps?
Here is a KB article on the issue;
Removing or Updating Windows 8 built-in Windows Store apps causes Sysprep to fail
It's even being reported that simply "opening" a metro app will cause sysprep to fail on Windows 8; Techy Geeks Home: SCCM capture of Windows 8 fails during Sysprep stage - Fatal error occurred while trying to sysprep the machine.
I have been doing so research lately into system imaging and deploying said image across multiple devices.
I want to image Surface Pro 3s (about 40 of them) with several dozen apps from the app store. My understanding is that if I want to use an image across multiple devices I have to use sysprep to generalize the image. The problem is any app off the app store is account specific and cannot be generalize. If you try to sysprep with apps installed you will get a Fetal Error, and you cant install apps from the store while in audit mode either.
Are there any options available to me, or will this have to be done manually?
I had windows 7 running on my computer. When windows 8 came out I used a second harddrive as the windows 8 installation drive. Windows 8 automatically setup a dual boot system where every time I started the computer it took me a windows screen where I could select either windows 7 or windows 8. This has been going on since Windows 8 was released.
I decided it was getting old so I decided it was time to remove the old windows 7 harddrive. I tried doing it inside the windows 8 dual boot screen but could not find an option. So I decided to reformat the windows 7 harddrive. I did this in command prompt mode. After doing so when my computer restarted it said it could not find any harddrive to boot. Windows 8 is installed on the other harddrive, the one that was not reformatted. So how do I get it to start using that harddrive as the boot drive? I checked my bios and even physically disconnected the old HD that had windows 7 on it, but none of that seemed to work even though the Windows 8 HD is definitely in the boot order in the bios.
I have Windows 8 consumer preview installed on my laptop. A couple days ago its licence expired, so I got Windows 8 professional to upgrade.
I made an install USB with the win7 USB utility and proceeded to boot from the stick. The setup then told me I should restart my pc and restart the installation from windows.
I did that, but Windows 8 setup won't start. It just starts reading from the usb for a second, then stops. The setup from the .iso I downloaded does the same thing.
To make things more interesting, the first time I restarted my PC after trying to upgrade windows from USB at start-up, I ran Windows 8 setup and it did start and started doing some things, on that small blue screen that pops up. I didn't pay attention to it until the blue setup screen disappeared and nothing else happened...
One more thing, I tried to install Microsoft windows server 2012 on my laptop a month ago and the same thing happened with the setup.
Did a few hours of research on the internet, tried to run it in compatibility mode.Can't really afford to do a "clean" install now, and on top of that, my PC reboots every 2 hours because my licence is expired...
Here: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB.
2- F 9 to choose boot order.. selected USB device
3- Installation starts for WIN 7
4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy...
5- Driver not found / wrong driver..
6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
I installed Windows XP on disk C and Windows 8.1 on disk D, but when I turn on my computer, I automatic start windows XP. it doesn't display choice menu for me select. So what I have to do to display menu.
View 9 Replies View RelatedI have a new HP envy t215 desktop with intel I7 Processor on a Megatrends MB with an EFI partition. The computer came with windows 7 pro but I want to temporally installWindows 8.
I want to remove the hard drive with Windows 7 Pro and insert a new 1TB Sata drive for a fresh install of windows 8. I have an almost new 1TB Sata WD hard drive formatted GPT/NTFS.I have completely wiped the hard drive. I will have to have the EFI partition on the windows hard drive.
The real question is will the windows 8 OEM software create the correct partitions when the system is installed.I know I need the EFI partition and the operating system partition at a minimum.
I have done a re-install of Windows 8 due to stabilty and speed issues.
It is a DUAL boot with Ubuntu 13.04, but this is not the problem.
The DESKTOP (I use Classic Shell) to get to the Desktop not the START screen. This worked well with my previous install.
However, I can't put ANYTHING on the blank Desktop - the folder Desktop has TONS of stuff in it.
Checked Permissions. Tried to Create a new folder or shortcut - it SAYS it's OK, and puts the New Folder in the Desktop folder, but it does NOT appear on my Desktop.
The Background works and I can get the Next Background by right clicking and selectin Next Desktop Background.
The START screen Icon of Desktop is also blank, except for my Background.
for Windows 7, you released some registry entries to add My Computer/User Folders/Control Panel onto the desktop for all users, which I've incorporated into an image to use with MDT. Anything similar for Windows 8? It's difficult to have to do this for individual users.
View 7 Replies View Related Last week, I tried to dual-boot install Fedora Linux onto my Windows 8.1 PC (Asus CM1435 Desktop). I resized the Data Partition (not OS partition) by 100GB. I then restarted the PC, and Fedora seemed to work okay, however, I could not got Windows to start anymore. I then turned on Secure Boot and other Windows 8-optimized settings and tried to start up again; it did not work, Windows could not boot. I tried to search up some details on how to fix this problem, and I came across bcdboot and bootrec commands, and ran them (/fixmbr, /fixboot, /rebuildbcd), however, there was no luck, as /rebuildbcd gave me a 0 disks found error. I also followed the instructions here [URL] At this point, "Windows Bootloader" disappeared from the BIOS. Restarting resulted in a "Missing Operating System" error.
I tried using a Windows 8 installation disk, and tried Reset and Refresh, but neither worked. Reset gave me "Recovery Partition could not be found" (was still there, just got messed up in the resize or something), and Refresh gave me "Disk where windows is located is locked" (perhaps from fast reboot?) Then, I gave up all hope on the current installation. I booted into my Windows 8 recovery disk, formatted C:, and installed it from there. When it got to "Windows needs to restart to continue", restarting put me to "Missing operating system", and I could not continue the installation. I tried it again, (formatted and ran again), but no luck there. TLDR: Installing Linux broke Windows. Deleted Linux and could not reinstall Windows from repair disk. Formatted partition for Windows and used Windows 8 disk to reinstall, but errors.
Current Issue: Cannot install
Deleted all partitions except a factory recovery partition and a data partition. SYSTEM partitions and boot partitions were deleted.
Put Windows 8.1 disk in, installed into unallocated space. After installation got to the "Restart Needed" part, PC restarts and does NOT continue installation. I looked at the partitions the setup installer made, and it seems everything is correct (MSR's, EFI boot partition, etc). However, PC won't boot from Windows Bootloader. My PC is on a GPT disk, UEFI BIOS. Windows Bootloader used to be listed in the UEFI menu, but now it is not listed, and cannot be booted to it. When I disable UEFI and boot, I get "Missing Operating System". With UEFI, it just says I need to disable it to boot.
[URL]
I have never dabbled in the installation or reinstallation of Windows 8 so far, but I am looking for information on how to re-install windows 8 onto a desktop computer that does not come with restore discs.
Now is it true that the CD-Key is stored on the BIOS? Or was that just a rumor that was floating around, I have never had true clarification on that.
If the answer is no, where would I find the CD-Key at that point?
Basically it is for a desktop computer that is no longer functioning and there were no restore discs created during original operation of the computer.
Original ACER desktop with Windows 8 and it was upgraded through the Windows Store to Windows 8.1 The upgrade came up with errors "the Secure Boot watermark".
I tried various things suggested to fix the error but was unable to.
I backed up the computer data.
I formatted the drive and installed Windows 8.1 from a thumb drive and it installed correctly without errors.
I was unable to install a Product Key Licence as the computer had it imbedded in the bios and I have no label with the key on the machine.
I should not have to purchase another licence. How do I find the original licence key?
Is it possible to repair or reinstall windows 8 pro while keeping the desktop app using the windows 8 installation disk and if so any link to a site that explain how to do it.
View 6 Replies View RelatedInstalled Windows 8 in GPT-mode, and the manual from Intel on how to make the hibernate-partition, does not seem to work, when the SSD is not in MBR-mode. In diskpart I can create the partition, but I can't set it to ID=84 when in GPT-mode. Diskpart returns an error, saying that it is not legal setting.
Intel Rapid Start works really fast in my Windows 7 MBR installation, so I would really like to have it in Windows 8 too.
Is it possible to change the way win 7 looks,such as the lack of the start button,and the applications as they are in win7 from the start button?
The Windows 8 came with the laptop. The only reason I am interested in Windows 8 is bitlocker.That is probably the only feature I am interested in.
