I was having win7 on my laptop .. Recently i have upgraded it to win8 .. My screen clarity has decreased and looks somewhat blur .. Right now I don't have drivers cd to install ..
View 4 RepliesMy system font size in Windows 8.1 decreased after the update. I had to go into Display settings and manually increase the size of the font in each category from 9 to 10.
Unfortunately, I don't know what the default size was before. I just know that after the update my system fonts appeared visibly smaller.
previously i was using windows 7 home basic 64bit OS. My battery used to give an average backup of about 2 hours. But since the time i have installed windows 8,it gives a backup of hardly an hour. I have checked all the settings in the control panel. They are all fine and proper. The fan keeps making a buzzing sound all the time, even when the CPU usage is low. This was not the case earlier. Also, my laptop is getting heated up more compared to before. What shall i do? What steps shall i take?
View 2 Replies View Relatedmy windows is in c drive and the c is 40gb and some of my friends tell me that do not install my programs in c drive because when the c drive is near full(as you know the color of drive changes to red) the speed of system will decrease.is it true?
View 9 Replies View RelatedI windows 8.1 installed an update on its own and when it restarted I can see only a black screen with a cursor flashin time to time, and I get black screen in safe mode as well ..here is what a tried and didn't work :
-safe mode(giving black screen too)
-Restore point(saying impossible to restore)
-fix with a windows 8 cd (some error )
-running cmd through the recovery tools and tried different commands but nothing worked (sfc/scannow, bcdedit /delete value safeboot)
-run through vga card too but same probleme,
My pc is hp probook 470 with switchable graphic cards intel 4000 and amd hd 8750
I installed windows 8 on an Acer aspire 8320TG with AMD HD 6370 graphics card. This laptop is according to Acer not suitable for windows 8 but it worked. However, my screen is extended to the right and I can't switch this off. Since I don't have a second monitor I only notice this when my mouse sometimes gets lost or when I make a screenshot. I tried changing some settings in the "screen resolution" dialogue, without success. Am I just not finding the right settings for that or is it some compatibility-issue?
View 3 Replies View RelatedI am trying to install windows 8.1 on my old windows xp laptop using a bootable USB from the universal USB installer, and when i press f10 on my laptop, and tell it to boot from my USB, it pulls up a black screen with a blinking line(like a terminal). i tried pressing a bunch of keys, and the only one that i got a response from was the enter key, which made a beeping noise.should i use a different program to put the ISO on my USB?
I'm going to try a program that i used a long time ago when the UUI wasn't working called Rufus. I'll let you all know if it works. Also I'll set it to NTFS instead of fat32 and see if that works.
Since installing Windows 8 to my laptop, I can no longer display to my Samsung USB hub monitor.
When I try to duplicate or extend, the hub says 'Connecting to PC...' but then nothing happens. Something is working as my mouse and keyboard are plugged into the hub and they work. I just cant get the display. I think all my drivers are up to date.
i bought an Acer Aspire M5 for school and wanted to do a clean install of windows 8 to remove bloat ware. I installed it using legacy mode from a usb boot stick. I than learned about UEFI and how it is a better option. So i followed the guide here, used Rufus to remake my usb boot. I put my bios into boot from usb hdd in UEFI mode, plug usb in. Than my computer goes into an infinite loop where it splashes the acer logo and restarts never getting.
View 6 Replies View RelatedMy brother just emailed me, he's just installed update 1 from Windows Update correctly and it's rebooted to a black screen and cursor only - nothing works, safe mode is no different - can't open CMD or Task manager
Can't seem to get Advanced options > System restore, PC keeps only giving F8 safemode options, none of them work
He doesn't have any 8.1 Media either. How to get him back into Windows ?
It's been a while but I just got a blue screen and The only thing I've done was install movie maker and I read that might be the cause, it baffles be because that's about the only thing I've changed in the last month with no issues.
View 3 Replies View RelatedI have a Dell Inspiron 1545, the screen is broke so I use an external monitor which doesn't project BIOS or Boot up so I cannot see anything. I found a thread on here that adds the Intel Graphics Driver for Mobile 4 Series for Windows 8 which I supposed would work on 8.1.
The link I installed:
Mobile Intel Series 4 and Intel HD Graphics 1st Generation. I installed it and restarted the laptop for the GUI to start.
But as I restarted, the screen was blank. I tried cycling through projection modes as I usually do, but this time It didn't work.
I have no clue of how to remove the driver to as I cannot see anything on the external monitor as I've tried it on 2.
I've tried booting into Safe Mode but as I've said, I cannot see anything on the screen so I'm not sure where I am.
I have bought a 250gb ssd for my inspiron 17r 7720 and was unable to use dell backup and recovery since the ssd is smaller than the original 1tb hdd. Therefore I have done some research and found that i need to get the iso for a fresh windows 8 install.
I am running dell windows 8 core and am in the UK/GB but unsure what iso to use. I have tried an iso from another thread but an error came up saying something like ''the product key entered does not match any of the windows image available for installation'' from thread called ''Thread: Windows 8 Core SingleLanguage OEM original'' but i think that version was a US one (pg11)
i have also tried changing the version and language using the tutorial on ''Why no image file of Win 8 OEM DVD?'' pg3
but on install it asked me for my windows 8 key... but i thoight it would retrieve it from the bios and i dont actually know my key, could I just download any Windows 8 ISO that isn't cracked and just install that? and that would use the bios key?
My Windows 8 Update didn't install yesterday & now seems stuck on 'preparing to install',
maybe the same problem it had when trying the free update to 8.1 that didn't work,
I install new os my new laptop that had windows 8. I lost windows 8 in the installation process. I got all the docs came the laptop. Is there anyway to get windows 8 back?
View 9 Replies View RelatedI have installed the full windows 8.1 on computer i restart my PC and it was all going normally until it reached the "getting windows ready" screen for half an hour and nothing happened.
View 5 Replies View RelatedI just received a new Dell Inspiron 15R-5520 64 bit laptop. I also ordered and received from Dell the Windows 8 OS DVD along with a Drivers DVD. I also own a valid Windows 7 OS with product key. I use Acronis True Image 2013 to backup and restore images of the OS.
I wish to partition my HDD into C: and D: with C: containing OS and Programs and D: containing Data. I have done this for years with all prior OS's up through 7. Now I wish to partition the HDD to accept either Windows 7 or 8. I don't wish to setup as dual boot since I will eventually decide on one or the other. I will create Acronis backups of both so I can switch back and forth easily. The Data partition should remain unchanged.
I've now partitioned the HDD with type MBR partitions and installed Windows 7. It's been backed up. I re-formatted C: and attempted to install Windows 8 to the C: drive. It failed without any clear error message. I'm thinking that it refused to install to a type MBR partition? If so, I need to re-partition the HDD to type GPT and start over. I have the following questions:
1. Does Windows 8 refuse to install to type MBR partitions?
2. If so, how best to convert partitions to GPT?
3. How to install Windows 7 to GPT partitions?
I want to install .XAP files into windows 8 so I can use the apps, How do I manually do that?
View 8 Replies View RelatedI just purchased Windows 8. I followed the instructions of some of the threads I saw below with no success. I am also not very technical When I got to Java I downloaded both off-line versions as recommended. At the bottom of the screen it indicated installation success. I then closed all browsers and re-started my machine. Java does not show in my programs and when I went to the test Java site it indicated no programs downloaded, but gave me a link to activate plug-in through Firefox.
View 6 Replies View RelatedSince the official leaked thread is full of people,and i don't wanna spam post all the same,i make a thread specific so all people like me can read, i hope to don't make you mad !
it's possible to update windows previes with the leaked one?! If yes,will i lose all or just apps or what?
I have a computer with a ASUS P5L-MX mother board with an e6300 cpu.
2 gig ram and 80 gig SATA drive.
It has Windows 7 on it with full act.
Trying to install Windows 8 on it but it get to about 30% then has an error that stops the install.
I recently upgraded my 250 gb SSD with a 1 Tb one. I used the Samsung migration software to copy the drive and then disconnected the 250 gb drive so things wouldn't get confusing for me.
Everything seemed to work well with the 1 Tb drive. Windows booted extremely fast as usual and it looked like everything was running the way it was before.
Today I reinstalled the 250 gb SSD with the intent to use it for backups. It came partitioned, so I deleted the partition via the windows disk manager and reformatted the now single partition. The drive itself seems to be fine.
The problem is that when windows 8.1 boots, it displays the window logo as usual, but there's a 25 second delay in doing the rest of the booting. The screen is entirely blank, so I have no idea what it's doing. The hard drive light on the CPU blinks, though. The boot order on my bios is correct. I'm not sure why it's so slow to boot now.
The other thing I noticed is that when I click on my Computer icon, the drives take awhile to list. A progress bar slowly advances at the top of the window. Once I've done this once, the drives display quickly, but whatever happened is reset when I reboot the computer.
I have new pc that has windows 8 pro installed. I would like to dual boot with windows 7 because certain software for work is not compatible with win 8. I was reading that I can create a vhd from windows 8, boot to the windows 7 installation media and install win 7 to the vhd, then I have the option to select win 7 or 8. Am I missing something here or is it as easy as this? Also do I need Win 7 ultimate or will he professional one work? I do not want to partition the hard drive.
View 9 Replies View RelatedI bought SSD and I want to install windows 8.1 there.
I have HDD which runs windows XP. I have no usb, no ODD.
I think I have to boot a setup file instead of windows XP but I don't know how to do it.
I have a windows 7 home premium retail license and upgraded to windows 8 pro x64 using promotion discount. Now I want to use some 16 bit applications that won't work with windows 8 x64. So I want to install either windows 7 or windows 8 32 bits on another partition along with windows 8 x64. Would it be legal ?
View 7 Replies View RelatedI need to install quicktime 7 for my airsight IP Cameras. Problem I am having is that the installation just keeps on trying to install it. I wait and wait, nothing happens. Then I try to uninstall, can't because it is still installing. I Turn off the computer, then tried to install quicktime 7 again and It says its still trying to install from the previous program. I can't close out the Windows installer box from the desktop... only when I turn the computer off. I do need to install quicktime to use the cameras in live view to see the video. Is there something wrong with Windows installer on my 8.1 or what?
View 2 Replies View RelatedI have a HP dv2519tu laptop. I have clean installed Windows 8 Pro wmc last week. But after installation my default microphone is not working. I have checked everything like drivers but still there is no solution.
View 9 Replies View RelatedI have created dual boots before but in each case I did it the "usual" way by doing a fresh install of a second OS on a new drive (or new partition) and then letting the newest installation figure out how to arrange boot loaders or boot managers or whatever, i.e to figure out the dual boot parameters for me.
In this case I want to set up a dual boot using what is now 2 separate drives each with its own complete install of Windows. Of course, I can boot to one or the other by disconnecting the drive for the one I don't want to start up, but that is obviously a hassle.
Is there an easy way to set it up so that one of them (Win 8.1 pro) actually recognizes the other and asks me which one I want at boot up. I know if I re-install one of them I can do it, but I want to just set up the dual boot, and not touch either of the OS installations per se.
Win 8.1
Every time after a major automatic update through Windows Updater, after rebooting, the computer starts the same process as the last steps when you install a fresh version of Windows 8, that is, you see the multicolor screens one after the other with the message that it's installing your apps, then don't turn off the computer etc. After the sequence is over, I'm taken to a blank screen and I have to log out and in to my profile. It seems, that after the update I'm being logged out.
I only have one user with the computer and I turned off the guest account. Also and It may be related,Can't create a new user account. I created a new user account with administrator privileges as usual, but the new account does not show when I log off and then in or try change accounts. It also isn't listed on the upper right corner of the start page.
Basically even though I see it in other accounts, I can't switch to it. I turned on Guest Account and also I can't choose it.
I set up windows to automatically install updates, and I don't want to change that.
When I'm in a hurry to restart or shutdown my PC and I only see "Shut down installing updates" and "Restart installing updates", is there some way to do it bypassing the update?
I've tried command line: shutdown /s but it doesn't work (it updates before shutting down).
Likewise, Alt+F4 (from the desktop) only offers shutting down or restarting and updating.
Neiter logging out and then choosing to shut down (your only choice is also to update and shutdown/restart).
My Current Windows is Windows 8.
I want to install Windows 8.1 .
my laptop comes up when installing Windows 8.1
I have chosen the language
in the page after when i want to install Windows the whole system in Hang
I can not select any option on the page.