Earlier today, the quality of my internet connection dropped suddenly. Then, I checked my Task Manager and it says I'm downloading constantly at 2.1 Mbps, what is basically all the bandwidth I have. Then, I check the Resource Monitor and it only reports the use of some bytes per second of bandwidth.
I have already disabled Windows Update because I thought it could be downloading updates, but I still have the same bandwidth usage.
My computer has 2 wireless cards and a gigabit ethernet port. I have my own internet and my neighbors each allow me to connect to their internet. If I were to set the Wi-Fi to connect to theirs, and the ethernet to connect to my internet would I be able to take advantage of the extra bandwidth?
I want to know how i can limit the speed of my connection to selected devices,i have a prolink N5001 router and a 6mbps connection ,i need to assign specific speeds to different devices using the wifi(like for the phone and laptop)...
Lately I am getting this error message when tying to download."You've reached the bandwidth limit for viewing or downloading files that aren't in Google Docs format. Please try again later.You can also try to download the original document by clicking here."I am using Win 8.1. does this in Chrome and Explorer, and in both Yahoo and Google search engines.
I am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
In Windows 7, when I go to gpedit.msc, then access the reservable bandwidth for QoS the default would be 20% so I always set that to 0% But in Windows 8 the default is 80% ?
Is the way Windows 8 calculates it the other way round?
so shall I set that to 100% or 0%? I dont want any bandwidth reserved
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
I am in the midst of the final steps in setting my my new Win 8 system.
I have a Win XP and Win 8 computer on my home network. I believe that I have set up file and printer sharing correctly. I can access the files and printer on the XP system from the Win 8 system. However, when I attempt to access the Win 8 files from the Win XP system, I get a long delay (about a minute or two) and then it asks me for the User Name & Password. I enter them and then and it works fine.
If I try to print on the printer attached to the Win 8 system from the XP system, I get a printer error unless I have already signed in with the ID & PW when accessing files. It never asks me for an ID & PW before attempting to print.
On the Win 8 system, I have selected "Turn off password protected sharing" in the "Network and Sharing Center/Advanced Sharing Settings".
The Win XP system has previously been correctly sharing files and printers with another XP system for some time and I haven't changed any settings on the XP computer.
Both the XP and Win 8 systems are assigned the same Workgroup name.
I want to backup my photos from my computer's D: drive to OneDrive. But when I start to upload them, it says those photos are also available offline. That means, all photos uploaded from my D: drive are also copied to my C: drive. But it wastes my space on the C: drive. All my settings are set to upload photos with online access only. I tried to delete the copied photos from my C: drive but it also deleted them from OneDrive. Is it possible to upload only to OneDrive without copying the photos to C: drive?
Okay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
I would like to make a folder share from a tablet with windows 8 with password protected to a laptop of windows 7 and another of vista. I have followed the tutorial of File Sharing - "Share with" & "Stop Sharing" in Windows 8. My PCs have been set in the same workgroup and same user account, network discovery and file and printer sharing turned on. At the first time, it is OK for windows 7. However after some changes of account (delete and create them on both windows 8 and windows 7), it doesn't work anymore with the error from windows 7 "Login failure: user has not been granted the requested logon type at this computer" whenever password protected turned on in windows 8 and only OK when password turned off.
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so: - WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar. - Under the wired network properties IP Version 4, I manually set addresses to be IP 192.168.10.1 Subnet 255.255.255.0 Gateway 0.0.0.0
Laptop B has only a wired network, set to IP 192.168.10.2 Subnet 255.255.255.0 Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
I've got a new Win 8.1 computer (Surface Pro 3), and on that computer, as an adiministrator, I turn off Password Protected Sharing for my network (Control Panel -> Network and Sharing Center -> Advanced sharing settings -> All networks). Once this is done, the other computers on the LAN have good access to the disks I have shared. However, when my new computer sleeps and wakes up, or even sometimes if I merely close the cover and open it, something has reset the password protected sharing option and turned it back on. The other computers no longer can access the shared data. I have to open up the control panel (as above) and turn password protected sharing off. Again. Many times a day.
How do I get this option to stick the way I set it?
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
I was happily using file history, it was backing up to my G partition, which is located on my second hard drive (both drives are internal)but now I get error message:
I think the problem is that this partition got added to my user, that's what the network path shows:
How do I get it out of my user, and back on a normal path?
I have a 20mbps upload with my ISP and I'm getting around 18.5 consistently. I've started using Zoolz for backing up and I have been assured it does not throttle the bandwidth. It reports it is uploading at around 15-16mbps which would be absolutely fine but Task Manager and NetSpeedMonitor show the upload speed as considerably lower.
I've attached a screenshot showing the difference but I was wondering if Task manager and NetSpeedMonitor could be wrong at all? It seemed quite coincidental that the speed reported by Zoolz was roughly what I would expect. Is there any sort of traffic that wouldn't show with Task Manager?
I re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
My 8.1 laptop shows multiple network connections to my Samsung Smart TV --- One as "media connections" and 3 as "other connections". Both devices are on a simple wireless network using Linksys WRT54GS.
Under the "Network" page, most of the "Properties" of the TV connections are the same except for "Serial Number" and "Unique Identifier". Did I do something wrong when setting things up? Are these extra connections harmful? Should I delete some? How?
I purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200] (c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
I decided to try a new network card due to problems with my onboard one, got a TP-Link TG-3269 after reading various reviews. most saying it installed in Win 7 with no problems or driver needed.Disabled onboard lan in bios, rebooted with new card in place, but card not recognised in device manager. Surprisingly, when I started windows troubleshooter it started working, it had reused my old onboard drivers even though it's in a PCI slot. but still not recognised in device manager.
I have 2 PC's. Both are now running Windows 8. The main PC was running Windows 7 and I there mapped a network drive (z to the Windows 8 PC. It worked very nice. The second PC was also shown in "networks" in "my Computer" right after boot of Main PC. So network for sharing is set up properly on second PC.
After installing Windows 8 on main PC, it is still working, but the time spend waiting for the network drive is waaaaay longer now. The name of second PC "Photo-PC", is shown right after boot, but when I first click on the name, and get this error:
Networkpath not found. Errorcode 0x80070035
If I then wait about 20-30 seconds and then click again on "Photo-PC" then I have access to all shared drives, included my mapped network drive Z:
How can I eliminate this 20-30 seconds delay after boot?
I have given up setting up a homegroup, never had it to work, but "oldfashioned" network drives used to work
