Maintenance :: Increasing Responsiveness Of PC By Reducing Startup Objects
Feb 4, 2014
Okay, so by reducing startup objects, windows can boot pretty quick, however immediately after seeing the desktop, whenever I try to do something like open a folder or open chrome, there is a slight delay as tray icons and desktop icons start appearing.
So how do I minimise this delay so that as soon as I see the desktop, I click on chrome and it immediately launches like how it does 20 seconds after startup?
View 4 Replies
ADVERTISEMENT
Jul 28, 2014
Responding to an error code while attempting an install of arcgis, I reduced the amount of RAM for startup under msconfig, advanced, boot.ini. Now I get the bsod with error code bad_system_config_info. I can't access Windows in any mode but can get to the black screen command prompt line.
View 5 Replies
View Related
Jul 21, 2013
My system is quite unresponsive showed my Disk Usage is always high with System at 0.1 MB/s.
What troubleshooting to perform.
View 9 Replies
View Related
May 4, 2014
I'm Running Windows 8.1 Update 1 Enterprise.
custom built machine :
I7 4770K
32gb ram
Samsung evo pro 256gb ssd
2x gtx 770 sli
the installation was done around end of january, i don't have much running on that computer but games (i have another system for work)
The issue i have is the Paged Pool memory after system is up is at roughly 250mb but keep increasing around 1-2mb per sec and never stops, after roughly 1h uptime, i'm already at 2gb.(after 1day uptime yesterday, i was at 56gb). The non-paged pool is however never an issue and sits between 150mb and 250mb (i would say normal values)
i've read about disabling NDU, disabling killer networks application (my network driver) and many other things but so far still no luck.
View 9 Replies
View Related
Feb 15, 2014
My audio output is my graphics card via HDMI (ATI HD5770) which is connected with my TV.
I need some software/filters or something else to reduce volume amplification in movies?
Example, when actors in movies just talking then volume is ok, but if there a war scene then volume jumping up.
I've already tried Loudness Equalization, something like this Normalize Windows Volume With These Simple Tricks without success.
View 4 Replies
View Related
Jan 31, 2014
I'm running an old touch screen in a mobile environment. And while I see great benefit to using Windows 8.1, I'm having issues with getting it to cooperate with my older LCD touch screen. If I could increase the size of the corner gesture, it would solve most my problems.
I've already increased the MouseCornerClipLength in the registry to 20, which is the max this will go. My screen just doesn't like the small tolerance Microsoft has given to bring up these gestures. I can cheat the calibration to make it work, but then it throws off the whole screen.
View 1 Replies
View Related
Dec 30, 2013
I have been experiencing bluescreens with increasing regularity. I've made sure all of my drivers are up to date. I've run dskchk, and done the windows memory test, neither of which have come up with anything. I am at a loss of where to go from here as these dmp files make no sense to me. I've attached the .zip from the sf diagnostic tool.
System:
OS: Windows 8.1 Pro
CPU: Amd fx-8350 stock-clocked cooled with coolermaster hyper212 evo
GPU: Asus Direct CUII Gtx760
Motherboard: Asus Sabertooth 990fx BIOS version 1604
RAM: 8GB 2x4 gskill Ripjaws 1600Mhz
Boot Drive: Ocz Agility 3 120GB
PSU: Ocz Fatality 750watt
View 9 Replies
View Related
Jan 6, 2014
I have an university connection, which has TTL set to 1. I made an Access Point with my WiFi in laptop, however, I think that the TTL may cause that the Internet connection on my devices which are connected to AP is not working. I believe that changing TTL to a higher number should work, because I made the same thing with my router, and the Internet was working then.
View 6 Replies
View Related
Jul 21, 2014
There are too many tap windows adapters and tap win32 adapters in my network and sharing centre> network adapter. it keeps increasing and decreasing automatically. but i only need ethernet to connect to my broadband. how to get rid of these?
View 4 Replies
View Related
Sep 15, 2014
how to move then resize a partition. I have a Dell XPS 12 Win 8.1 system with 7 GPT Primary factory partitions. I cloned the 256 GB mSATA SSD to a 512 GB mSATA SSD.
*** Right now my disk looks like this with (D) empty (no data):
|-OS (C)--|-Data (D)-|-PBR Img-|-None--|-Unallo--|
|-112 GB-|-109 GB--|---6 GB----|-8 GB-|-227 GB-|
|---#5----|-[empty]--|----#6----|--#7---|---------|
I've omitted 4 uninvolved factory partitions, showing only the rightmost 3 factory partitions (#5 #6 #7) and an Unallocated area.
*** My objective--w (D) & Unallocated combined--is this sequence:
|-OS (C)--|-PBR Img-|-None--|-Data (D)-|
|-112 GB-|---6 GB---|-8 GB--|-336 GB--|
|---#5----|----#6----|--#7---|-[empty]--|
I need to know what to do to get this all to happen.According to an expert Dell XPS 12 user, partitions #5, #6, and #7 MUST be contiguous in the last sequence shown, because otherwise a Dell backup program will not work, plus there are other problems.
I'm looking for partition manager how-to details, hoping to simply drag 109 GB (D) over to the right (just left of the 227 GB Unallocated area) then easily make those two a 336 GB (D) drive
My objective sequence HAS been accomplished by the expert Dell XPS 12 user mentioned above who arranged his partitions just like that, although he had different intermediate partition positions and proceeded somewhat differently. He Outlines what he did here:
How to upgrade the SSD in the XPS12 (...whilst avoiding the mistakes I made!) - Laptop General Hardware Forum - Laptop - Dell Community
I've tried partition managers' Resize/Move function with a slider, but exactly how to use the slider to move a partition eludes me.
These partition managers I've tried and have installed now are:
-EaseUS Partition Master 10.1
-Paragon Partition Manager 2014 Free
-MiniTool Partition Wizard Home Edition 8.1.1
(I've also tried its bootable CD that runs under Tiny Core Linux)
Unless I meet my objective above, I can't use my XPS 12 for work, since I need a 512 GB SSD to hold all the existing data I have.
View 8 Replies
View Related
Nov 29, 2013
I can't disable startup applications because I can't find them in the startup list.
Yes I know they are not anymore in msconfig.exe but instead in taskmanager-> startup. But they are not there.
I tried with cccleaner but also I can't see all startup apps.
So where I can find all startup apps list and disable them?
View 9 Replies
View Related
Aug 6, 2013
In Task Manager-Startup I have several programs (Adobe stuff) that I want out of there, I know I can just disable them but I want them removed. They used to be in HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionRun or HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun but in Windows 8 they aren't. I can view the file locations but can't figure out what's causing them to startup when Windows starts.
View 3 Replies
View Related
Jun 27, 2013
I noticed from some days that in windows 8 pro, the Fast Start-up did no longer works. and windows booting loading and shutdown takes many time, 2 or 3 days before it was fast since I installed windows 8. why is that,? although these option still checked,
View 9 Replies
View Related
Dec 19, 2013
I have been trying to remove a blank startup item, but it seems like there is no valid location for it. I have searched in all the locations listed below without any luck. Could there be another location or could it be a virus?
C:Users(User-Name)AppDataRoamingMicrosoftWindowsStart MenuProgramsStartup
AND
C:ProgramDataMicrosoftWindowsStart MenuProgramsStartup
AND
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun
AND
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRunOnce
AND
[Code]...
(this is the blank program that I am talking about)
View 6 Replies
View Related
Oct 20, 2013
As I start my Surface Pro the normal Start appears. By tapping a Desktop tile I see My PC folder opened instead of desktop wallpaper...This started to happen after I installed recent apps updates. As far as I can remember, no registry tweaks nor system modifications were made by me.
View 3 Replies
View Related
Nov 7, 2013
i recently got a new laptop "asus vivobook" that came preloaded with windows 8.
The laptop comes with a hybrid 24 GB ssd (8GB of those are for the system files,windows 8 is installed on,the remaining are in a 2nd partition for recovery) i deleted the recovery partition and made a recovery on an 8 GB usb drive,because im dual booting a different linux os alongside windows.
I used rEFInd boot manager to boot the 2 operating systems,everything boot and works fine.
However,since the dual booting started i noticed that the windows 8 loading time has became a bit slower,when i choose to sart windows 8 the asus logo appears and under it this message
"Scanning and repairing volume (?Volume{...large hex identifier..}): 100% Complete"
it stays for 2,3 seconds and then windows 8 start,i ran a chkdsk for the c drive,but that didnt solve the problem.
View 9 Replies
View Related
Apr 2, 2013
I ran a virus program to get rid of that "Visual Bee" and not only did it not get rid of it , I lost some of the tiles on the start up page. The one in the left corner that takes you to the desktop is gone. how to restore those tiles?
View 5 Replies
View Related
Dec 8, 2012
I downloaded and installed Windows 8 on October 26th. So far, great experience however... the last couple of days when starting my new Dell Inspiron 5720 it is running a "Scanning and Repairing (C) and is getting stuck at 27% (waited over 2 hours) so I hold down the power button and it restarts as normal. Only seems to start the check on every 2nd or 3rd startup. I have googled and read many articles and have since error checked my C: drive through properties with no errors being reported.
I guess my question is what would cause this to all of a sudden start and why and how do I stop it. It is very frustrating . I have completed virus scans, defrag, error checking, etc.
The Dell laptop is new but came with Windows 7 in early October. It is 8GB RAM with a 1TB drive running Intel 7.
View 9 Replies
View Related
Nov 6, 2013
When I put Windows 8 in sleep mode (yes sleep mode...I'm not shutting it off), and I turn it on, it sometimes takes up to 5 minutes to respond to any input. I'm wondering what I can check to make sure the minimal apps/programs are running, and there are no unnecessary memory hogs churning in the background? How can I test it, monitor it, and optimize it?
Any issues with Firefox sucking up tons and tons of RAM? When I look in the Task Manager, and sort by Memory, Firefox is ALWAYS at the top of the list. Is there any way to regulate the max memory settings for Firefox?
View 9 Replies
View Related
Jun 13, 2014
I'm using an Asus N550JV running Windows 8.1.
Recently, whenever I restart my computer or shutdown->startup, I notice that startup programs (e.g the Logitech Application for my mouse, Google Drive sync etc) do not run unless I sign out and sign back in. I can constantly replicate this.
I'm not sure if this has to do with me disabling hibernation (I did this on day one of getting my notebook).
The problem with this situation is that I disable my touchpad because I have a wireless mouse, but on occasions where I don't have a mouse available, I can press the Asus instant-on button and I have it set to toggle the touchpad on/off function. Because the startup services aren't loading, I'm unable to use that button now and I'm stuck using my keyboard to try to manually turn it on.
View 8 Replies
View Related
Aug 18, 2014
I recently went to command prompt on my main pc and did : chkdsk /f /r on my main computer.
It said "the current thing is in use, would you like to run check disk on startup? (Y/N) I put Y, then restarted my computer. Then it was stuck on 27% for about an hour, so I got worried and restarted my computer about two or three more times. it says "scanning and repairing drive (C 27% complete)" and none of the times it would load regular windows so I decided to just stick with it.
It's been over 3 hours, and it's still stuck on 27%. How can I disable it or how long will it take?
system info HP desktop
12gb ram
2 tb hard drive
windows 8
Also I tried f8 and it just brings me back to system restore, and when I tried that it just gave me a black screen, so i'm just letting my PC sit and do the C: repair
View 1 Replies
View Related
Jul 14, 2014
So I've been experiencing this pretty much from the first day after installing Windows 8.1.
It goes as follows:
1. I power on the PC (or restart), windows boots up, I put in the password and it is fairly quick to enter destkop mode.
2. Now this is when my issue occurs, the startup programs may take up to 2 minutes to start load.
This is not because my computer is slow or anything like that, it almost seems like there is a set delay and only then my programs are allowed to start loading. Once they start loading, it only takes couple of seconds. The problem is, they won't start - only after I hang in destkop for about a minute or two.
View 7 Replies
View Related
Sep 15, 2014
I have had my Windows 8.1 Pro x64 install since February. Now I think it is time to deal with this once and for all.
I have an extremely powerful computer, 3930k, 64gb ram, RIVE, 840 Pro SSD so hardware is not the problem.
I recently got another Windows 8 (enterprise) laptop (not 8.1) to compare with, and it boots at exactly the same time as my desktop, but the laptop loads all startup items within 1-3 sec, but my desktop takes as said 1 minute and 20 seconds each time.
I have used this guide and many similar: Startup Delay Time - Reduce in Windows 8
I once changed the value to 10 minutes in milliseconds, and it took 10 minutes, but when I change to 0 milliseconds, or lets say 1000 ms for 1 second, it still takes 1 min and 20 seconds.
On my laptop I can change the value StartupDelayInMSec however I want and it will work, but I cannot have it low on my desktop and make it launch all startup items below 1 min and 20 sec.
View 5 Replies
View Related
Apr 23, 2014
My specs are:
I5 4670k
MSI g45 z78 mobo
16 GB G.Skill 1866
samsung 840 evo SSD
toshiba 2 TB HDD
EVGA GTX 760
I have completely installed a clean win 8.1 install and still have this freezing issue. It happens after i login and after my bitdefender internet security loads fully i try to click on the desktop icons but they are frozen. My mouse moves and i can click on the taskbar and startbutton and CRTL+ALT+DELETE as well. It freezes the desktop icons for 30seconds max. I have booted into safemode and it occurs there as well.
I have ran multiple malware and antivirus scans, sfc/scannow, DISM /Online/Cleanup-Image/RestoreHealth, checked my event viewer for any errors, ran chk dsk, bcdedit /set disabledynamictick yes, i cant figure it out. All drivers are up to date, I disabled my lan adapter since i am using wifi. Windows updates are updated, defragged the harddrives, and I been reading through forum after forum but i have not seen this exact problem before. Also this is on stock BIOS no overclock, I also monitored the cpu and memory usage during the time of freezing and it nothing out of the ordinary usage, cpu is kept within 5% and memory is at 20% or less.
View 9 Replies
View Related
Oct 30, 2013
I recently installed Windows 8.1 on my Inspiron 7520 and I noticed that during the startup the disk usage is around 98/99% of my Samsung SSD 840 Pro 120gb.
I saw a lot of posts where the users complain that, during this high usage of the disk, apps don't open, the system freezes around 5 minutes and after that, there are random high usages, even on idle. But in my case this high usage lasts only few seconds (around 30s), I can open some apps with no problems and never happens again on idle, only if I restart Explorer.exe. If I restart it, it happens all again.
My question is : Is it normal? The high usage only on startup? My only worry is mess up with my SSD due this usage.
On Performance Monitor, the process which writes a lot is System. I disabled every 3rd party app on startup.
View 9 Replies
View Related
Nov 28, 2013
My PC boots up in 10-15 seconds, but then it sits at my desktop with everything functional for about 10-15 minutes before my startup items (Battle.net, Spotify, DNSCrypt, etc.) actually start loading up. Even after the items have loaded up, Windows Update continues to tell me that the service is not loaded and that I should reboot. I have downloaded the .zip from the forums including all the default services reg files, ran them all to return to default, even ran Tweaking.com Windows Repair, still the same issue.
View 1 Replies
View Related
Mar 5, 2014
I'd like to change the order in which certain programs in my startup folder load. I don't need to know how to add or remove programs from the startup folder, and I'm not talking about security or system programs. I'm talking about some programs I've added to my computer, which I use all the time in my research work, and I just want them to wind up in a different order on my taskbar for ease in switching back & forth, making notes, etc.
View 1 Replies
View Related
Oct 7, 2013
Where the registry entry for the startup items in Task Manager are?
I have a couple there that don't exist anymore. They are set to disabled but I'd like to remove them completely from the list.
View 1 Replies
View Related
Jun 23, 2013
I just did a clean install of Windows 8.
I notice that in Task Manager>Startup tab there is an item for Logitech Download Assistant.
Why is it there?
I have yet to install any of my Logitech software.
View 6 Replies
View Related
Mar 27, 2013
Where in control panel do I configure what apps @ startup?
View 6 Replies
View Related
Mar 7, 2014
I have a new laptop windows 8.1 (64bit) 8gb RAM i7 processor which should be sufficient for the software I use. However on start-up my memory is already at around 80% and stays like that.
The most seems to be caused by servicehost (network restricted) (11) another program is IAStorDataSvc (32bits) even after i updated Intel Rapid Storage it still seems to take some memory. (My system settings are in Dutch but I guess it's pretty much the same as in English).
What could be the cause of the massive memory use?
View 5 Replies
View Related
