Since apparently they removed the Performance and Information Tools section of the Windows 8.1 Control Panel, I haven't been able to find a way to generate a System Health Report.
How to generate one? Or did they remove the capability of generating one? I know I had one in 8 but I upgraded to 8.1 and nope. No section for it?
Windows8, 64x, i3, 4gb samsung 300e can not generate its health report. I did sfc scan(found some corrupted file but says it could not repaired some of them), hard disk and memory test(fine), disk cleanup done and I have tried exclusive microsoft services system start up (msconfig settings) but still failed to generate report.
View 9 Replies View RelatedI stumbled across this on another site. Win 8 has the ability to generate a detailed report about your notebook/laptop's battery. Worth a look...
Battery Usage Report - Generate in Windows 8
I have a desktop computer running Windows 8.1 Pro 64-bit. My computer suffered from an improper shutdown during a power outage. I am getting multiple error messages on logging in, and the sfc /scannow command shows several corrupt files, including msvcr80.dll and multiple others, preventing programs like Microsoft Word from running properly.
I am getting the message after running sfc /scannow in an elevated command prompt that Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.Log %WinDir%LogsCBSCBS.log. I used the findstr /c:"[SR]" %windir%LogsCBSCBS.log >"%userprofile%Desktopsfcdetails.txt" command to get this log outputted to a sfcdetails.txt log, and it shows which files are corrupt.
I then decided to turn to DISM, in an elevated command prompt, to ensure the component store was good, so that SFC can fix the files. This is where I am getting lost.
Dism /Online /Cleanup-Image /CheckHealth states that: The component store is repairable. However, when I run Dism /Online /Cleanup-Image /RestoreHealth , I am told (after some minutes of it running) that DISM failed, no operation was taken, with an error code of 0x80240021.
Looking at the dism.log file, I am seeing a very long log. These are the initial lines:
[2344] Caller did not request sparse mount
[2344] Mounting new image.
Wim: [?GLOBALROOTdeviceharddisk0partition1RecoveryWindowsREWinre.wim]
Image Index: [1]
Mount Path: [C:WINDOWSTEMP35f47719-b059-4f12-b5ee-101b2768bade]
[Code] .....
From what I can make, some file name or directory is incorrect? I have attached my dism.log file (saved as a .doc file for attachment purposes), my sfcdetails.txt log (obtained from the sfc /scannow function), and a screenshot of the Repair-WindowsImage -Online -RestoreHealth error message when I run it in PowerShell. How I can run DISM correctly to fix my component store.
I got 3 'file not found' entries in my Autoruns report (see below).
Having removed filters from the report, it looks like the files are there, but not where they are expected to be (am I correct with this interpretation?).
So should I be doing something like moving them to where they should be, or deleting the 'file not found' entries, or should I just leave well alone.
I am trying to generate LangINI for:
1. Boot.WIM,
2. Install.WIM,
3. WinRE.WIM (inside Install.WIM)
4. and maybe for main distribution tree (burned into ISO).
Directories (with time chronology of their creation):
ISO is extracted to C:ISO
Boot.WIM is mounted to C:Mount
Install.WIM is mounted to C:Mount (after Boot.WIM is unmounted)
While Install.WIM is mounted, the WinRE.WIM is mounted to C:WinRE
Is this below correct? (after LP are added)
Boot.WIM:
dism /image:C:mount /Gen-LangINI /distribution:C:mount
WinRE.WIM:
dism /image:C:winre /Gen-LangINI /distribution:C:winre
Install.WIM:
dism /image:C:mount /Gen-LangINI /Distribution:C:ISO
dism /image:C:mount /Gen-LangINI /Distribution:C:mount
(both?)
My doubts:
A. I don't believe it, because unpacked WIMs have directories like "Program Files" "Windows"... so "sources" (generated by /Gen-LangINI) directory looks inappropriate. IMHO distribution shouln'd be same as mounting point, but I just mounted vendor's boot.wim it ALSO has Program Files", "Windows"... AND "sources" inside.
B. Also I am not sure about those two commands in Install.WIM. Isn't it overkill
Today I started on do a disk defrag on my wifes computer using defraggler. When I opened the application under "disk health" in yellow said warning. I went to the health tab and shows the HDD temp is green which means within the allowable number but what can I do to give me more information on why I am getting this message?
View 9 Replies View RelatedWhen you try to delete WLM messages you get this error
"An unknown error has occurred" and the message cannot be deleted.
People with this problem, often need to delete multiple messages or entire folders. That error appears because WLM only thinks it has that/those message(s), but actually that message is nowhere to be found in the the Windows email folders. The message exists no longer, but WLM still shows it as being in its own folders and you simply cannot delete it using the normal procedure.
For the easier way, one can drag the unwanted and non-existing emails to the Deleted Items folder, one by one. However, that is crazy when you have to get rid of hundreds or thousands of them (yes, I had that situation!).
This is how to trick WLM if you want to delete multiple emails giving you that error:
1. We try to simulate forwarding multiple messages. Select multiple emails by clicking on one and then using SHIFT to click and select multiple concatenated messages. Do that screen after screen (scroll down/up). Stop when you see the FORWARD button has become grey. That means one email is even more stubborn and doesn't even want to be forwarded.
2. Hold the SHIFT key and click the messages up and down until you find the culprit. It will be just outside your selection, when your selection manages to un-grey the Forward button.
3. With a lot of messages selected and concatenated, click on the Forward button. You'll get another error message "One or more messages could not be attached. Select OK to continue creating the note." Click Cancel.
4. Now something has unblocked those messages (or message information) and, with the selection on, you can Delete them by simply clicking the Red X (delete) button.
5. The message that made the Forward button grey, can now be deleted as well.
6. Keep doing that until you finish the bunch of messaged you wanted to delete when you got the initial error.
When I run the assistant I got and internal error msg and the program stops running. I tried turn off my antivirus but that didn't work. It reads Internal Error:Error retrieving the scan report. I'm running Windows 7 Home Premium 64 bit.
View 1 Replies View RelatedI am trying to create a system image backup and I keep getting this error message
[COLOR=#FF0000]'Threre is not enough disk space to create the volum shadow copy on storage location. Make sure that for all volume to be backup up, the minimum disk space required for shadow copy creation is available. this applies to both the backup storage destination and volume included in the backup. Minimum requirement for Volumes less than 500 megabytes, the minimum is 50 megabyte of free space. for voulimes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended at least 1 gigabytes free of disk space on each volumes if volumes size is more than 1 gigabytes (0x80780119)"
I am backing it up to a external HDD with over a tb of free space but I understand its not letting me perform the backup because the hidden 100mb hidden system partition is full...if i create a larger partition how can I copy that system partition to it? if that is possible....
I have a 20mbps upload with my ISP and I'm getting around 18.5 consistently. I've started using Zoolz for backing up and I have been assured it does not throttle the bandwidth. It reports it is uploading at around 15-16mbps which would be absolutely fine but Task Manager and NetSpeedMonitor show the upload speed as considerably lower.
I've attached a screenshot showing the difference but I was wondering if Task manager and NetSpeedMonitor could be wrong at all? It seemed quite coincidental that the speed reported by Zoolz was roughly what I would expect. Is there any sort of traffic that wouldn't show with Task Manager?
My laptop is quite new with the following specs
Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz
8Gb Ram
1Tb harddrive
but sometime system.exe takes up as much as 80% of the CPU. and it does causes the mouse pointer to stutter/ hangs. Even-though Power plan is set as "High performance"
My WEI score just disappears as it shown on the picture
I had this problem since Vista but it also appears on Windows 8.When this problem is present when I check for updates it is not showing the updates - just a blank screen and I cannot see which are the updates.
I don`t know if it is related but estimated usage on my Wifi connection is also not present.
I have already deleted the content of WinSAT/DataStore and run the following command Winsat formal -restart clean - the result is shown on the above picture.
i have windows 8 when trying to use system restore it gets to the screen that says system restore is restoring files, but that's as far as it gets, I let it run today for 4 hrs. what can i do?
View 3 Replies View RelatedI was able to do it in XP. I created a shortcut to system restore and put it on the Start Menu. So much easier than the way Windows 8 works. Wondering if there's a way to do the same in 8.1?
View 9 Replies View RelatedMy friend's computer has a hardware fault, and so I removed the drive to copy things off of it. I put it in an external enclosure, and it has 3 partitions. 1 is a HP tools one, another is a recovery partition, and the third is the main one named SYSTEM. It seems to be blank however, including hidden files, yet it says it's about 50% full. How can I get them to show up?
View 4 Replies View Relatedtried to do system restore and got this message (see attached) I then did an error check on C drive and I got this message.(see attached)
View 4 Replies View RelatedI've been running Windows 8 since 10/27 and just noticed there were no System Restore points. Doesn't Windows 8 automatically create them when a significant event occurs, like Windows Update?
I created one manually but would like to see Win 8 create them.
But I still cant restore to a chosen Restore Point.
View 4 Replies View RelatedToday while casually browsing the iNet my Music suddenly stopped playing and while at first I believed it to be an issue with Xbox Music I later discovered that the Culprit was actually one of my RAID0 HDD's which decided to go AWOL - The Intel RST Manager confirmed this by showing that the 4th Drive ( I'm running two separate RAID0 with two drives each ) was missing.
A restart didn't solve the issue at first but physically removing the affected RAID and installing it back again using the SATA connectors of the other RAID0 for testing did. Interestingly enough even now that I installed everything back like it was before it appears to be fine
Right now I'm considering in converting my second PC into a BackUp System itself by getting large enough HDD's, install them into the primary PC first in order to quickly copy all the files and then move them into the secondary PC.
From there one I plan to use BTSync which is technically not a BackUp software but pretty much behaves like one as it simply copies all files of a selected folder from the primary PC to the secondary PC which it cannot find there in an actual version.
This is the message I get when I try and open system restore.
At the same time o0ther serious problems have arisen:
In control panel>programs and features all programs except those named Mi-Mo have disappeared. Some installed since are there, and those in the quick launch menu still work. Most are also missing from the start menu.
Al;so on start up I get a small window saying explorer.exe with a yellow exclamation mark and nothing else.
I have Windows 8.1 x64 installed. In the task manager, it shows me that 35% Memory is used. Now, when I add up all the Memory MB's within the task manager it goes to around 1100MB maximum.. On my machine, I have 8GB RAM and it also shows the same in the system about window since I have the 64-bit windows installed.
Doing a quick calculation of (1200/8000)*100 = 15..So, my system memory should display 15% used. Then why is it still showing around 37%? I have also tried running virus scans but have no infections as such... Also, one of the biggest memory hoggers is the 'Service Host: Local System'.
I'd do a system restore point to get over a problem - there aren't any!
Shouldn't windows automatically make them?
I've had this problem for a year with windows 8 (now 8.1) and I think I even had it with 7. Before that it never seemed to be a problem.
I want to use System Restore because every time I right click in file explorer or on my desktop, they crash (but I'm still able to run other programs normally). But when I try to start it, nothing happens. In the task manager, under background processes, it lists System Restore as many times as I've clicked on it! My anti-virus software isn't reacting to anything, though.
I really need to make a system image before I send my laptop in to get a hardware problem fixed, but I don't want to carry this over in the system image once the hardwares fixed...
I have never managed to get System Restore to work on Windows 8 or Windows 8.1 and always have to fall back to a backup.
I get a message indicating error code 0x80070005 and suggesting I turn off my anti-virus.
I have tried turning off my AV before running the restore but to no avail, and since the AV starts automatically I'm not quite sure how turning it off before the restore would work.
I recently tried a restore from the latest recovery point and got error code 0x80070006.
I was wondering what is the best way to backup my system.
Should I use 'File History' or should I use 'Windows 7 File recover'.
What are the benefits of each and are there any difference??
I've googled but have most found articles on how to use windows 7 file recovery
I installed 8.0 with the factory disk and for awhile the option to "refresh your pc" worked perfectly. However after the 8.1 update, I get a message stating to insert the 8.1 disk and it won't work with my regular 8.0 disk. I don't have an 8.1 disk. Is there a way to download an iso and use that to refresh the pc then use the original 8.0 key? I usually try to restore every 6 months because it's a habit I have had since 7. Usually my windows works fine but I run low on SSD space and it's easier to erase and restart everytime.
View 3 Replies View RelatedEverytime I disable the system restore it enables itself a day or so later. It's incredibly frustrating it does this with both PC's.
View 1 Replies View RelatedHow Often Do You Create a System Recovery Image?
View 9 Replies View RelatedMy son's Windows 8 laptop has 6 GB of RAM. His paging file resides entirely on the C: drive and is the "System managed size".
His paging file is set to 960MB. Doesn't that seem very low? It's even less than the recommended 4,067MB.
what it really means to "back up" your data. I got a Seagate drive for making backups. Before I install it I need clarification.
The more I read about backups, files, settings and disc images I get more confused. I see that if I don't do it right and my computer crashes, I may have not saved what I needed.
First should I use the software supplied with the Seagate drive? Or use Windows?
Do all my files need to be in the libraries folder to get saved? Like documents, music, pictures and videos?
Do I need to make a system disc also? This is just to boot up the PC if it fails?