How To Find System32 Files
Aug 31, 2013
I'm trying to download some DLLs to use for my Paint Shop Pro program and I need to put them in my System 32 files, and I can't find System 32. I new at working with this Win 8. I received the 2 dlls in a zip folder. I opened them and saved in a folder in Documents. I tried to right click on extracted file to find the System 32 files that way, not there. I went to extract and tried to extract to, and tried to browse to System 32, but I just could not find the System 32. I saw Programs and Programs (68) but no System 32 .
View 9 Replies
ADVERTISEMENT
Apr 6, 2013
dad upgraded from windows 7 to 8 a few months ago and selected to keep his old files (i.e. pictures, vids, so on) now we cant find his old files. I have gone to the windows.old file and there are files there but they all say that they are empty. everything else seems to be fine but we cant find all of his vacation pictures or other media that he really was not wanting to lose.
View 3 Replies
View Related
Dec 9, 2013
I have been using a PC for over ten years and, at best, I am still a novice! I am experiencing a lot of issues I had overcome with Win7. I will address thes one at a time. In the past when I was looking for a folder or file I pressed START and keyed in what I was looking, a name or unique words. How do I do that using Windows 8.1?
View 5 Replies
View Related
May 8, 2013
I recently purchased a new laptop (Windows 8), we put the hard disk from my old slow laptop (win XP) that stopped working into a "sata enclosure". When I attached it, I cant find my personal files. Its like the space is taken up but my important files cant be seen!! All that comes up on the hard disk enclosure drive (F is: recovery, swwork, windows, and preboot folders... and a recov.wim file. I even ran "Search" but still cant find my documents or anything...
View 9 Replies
View Related
Oct 24, 2013
I have a lot of files who are stored into folders (~ 2-3K worth of folders with 2-20 files in each folder) and I need to search in each one to see if there are any files that are similar in name. None will be exactly the same so I need to only compare the first 10 characters and if there are 2 files that have the same characters, then I need to have them displayed so I can decide if I should delete one. The problem with commercial duplicate detectors is they match the entire name or the CRC of a file which in this case will be different.
View 9 Replies
View Related
Oct 29, 2013
So I usually copy the sysinternals suite to /windows. This in order to make it easy to use the tools in bat files and soI can quickly open them. Any ways in win 7 I didn't have a problem with this.
In win 8 I had some issues copying these files to %windir% but system32 was fine. I think this was due to my av (agnitum) preventing this. Not sure though. Any ways, now when some of the tools are updated I try to copy the whole suite again. Only it only works with overwriting the previous files if I copy over 1 file at a time. Sometimes it seems to work if I pull over 5-10 a time. But always works 1 at a time. This is one of the weirdest issues I have encountered. And yes, while doing this my av is disabled.
Any input as to why this happens?
View 2 Replies
View Related
Jan 9, 2014
I'm now running the windows 8 64 bit OS, and logged by a Microsoft account.
Now I am doing some work using Visual Studio and encouter some problems about the PATH variable.
1. Under current Microsoft account, I cannot see the full PATH variable neither in CMD or the Environment Variables dialog, the figures below shows the current view:
This is my current PATH
and, of course, I set it under system variables.
Well, this path works fine in command line executing, but in visual studio, it doesn't work.
2. So, lets see what I have in visual studio (run as administrator):
Code:
System.Environment.GetEnvironmentVariable("path");
"C:Windowssystem32;C:Windows;C:WindowsSystem32Wbem;C:WindowsSystem32
WindowsPowerShellv1.0;C:Program FilesMicrosoft SQL Server110ToolsBinn;
C:Program Files (x86)Microsoft SQL Server110ToolsBinn;C:Program
[Code]....
If you're willing to look at the text above, you'll find that this "PATH" is totally different with the one we set in Environment Variables dialog or get from the CMD.
I want to use some executable files in "d:commonin" with my web application hosted by IIS8, but I found that the web application could not find the executable files in "d:commonin", which should exist in "PATH"
Well, though I can just put the executable files into system32,
View 5 Replies
View Related
Dec 7, 2013
I figured out how to search but Windows 8.1 stopped searching for files. I type a word in the window and nothing happens after I hit enter.
I searched the web and suggestions say to use the charms menu but I haven't figured out how to search a thumb drive with the charms menu search.
When I insert a thumbdrive, the window opens and I type in the Search Toshiba (G) box and hit enter and nothing comes up and Windows can't find its own files on a thumb drive but it works on the C drive.
I keep turning on another computer with Windows XP to do searches or I use Windows 7 and I can get around a little.
The screen shots on the internet doesn't seem to work or relate with my system.
View 4 Replies
View Related
Jul 2, 2014
My "c" drive is starting to get full mostly because of a very large music collection. My friend said"simple,just put everything on "d". I think I should have gotten an external drive. Anyhow, now when I go to listen to a playlist song on media player, I get blue dots with an "i"in them and a message saying that the media player can't find the file. I tried changing the file location for the media player to"d"drive,but it would not let me (suggestion from same friend who said "mine works fine in "d" drive. Should I move everything back or get an external drive or is there a way to make this work. Asus Notebook a45x ,Windows 8,Media player version unknown.
View 4 Replies
View Related
Sep 5, 2012
Running window 8 pro and cant search for files from the search charm. apps and settings searches work great.
View 9 Replies
View Related
Aug 24, 2014
My friend has 3 or 4 hard drives with personal files that she wants me to combine into one hard drive. She says there will be many duplicate files and we need to eliminate them. What would be the best way to go about doing that?
View 7 Replies
View Related
Feb 7, 2014
After updating to 8.1, windows search is slow, even though I disabled Bing and I don't have extra locations in the index, and it doesn't find files even though they are in subfolders of My Documents. This problem is very outstanding with Word files.
I tried deleting the Data folder, and rebuilding the index, but to no avail. I need a way to search for text within files, so the "Everything" app does not seem to be the solution. I am trying out AgentRansack right now, and it does work, but it is slow and uses up almost all the CPU when it is searching.
View 6 Replies
View Related
Dec 8, 2013
I am running windows 8.1 ... I have accumulated many years of files. Before I move to new hardware, I would like to find files to delete.
I want to be able to find :
-- files that have not been used in years
-- files that are huge.
View 7 Replies
View Related
Jul 11, 2014
I'm having trouble with the environment configuration on my new Windows 8 machine, I don't remember running into problems like this on 7, but I can't seem to find much useful online..
I have 4 dll files that need to go into the WindowsSystem32 folder in order for one of our applications to run. This is done through an Advanced Installer package I created, which will not allow the installation unless the user has administrative rights (it deals with Windows Services as well). One of the steps is to copy these 4 dll files, which it apparently does without any errors.
Herein lies the problem.. Technically, the files do indeed exist, as seen in the Bash shell screenshot below:
While they are quite simply not visible through either Explorer or command prompt, even when run as an elevated command prompt. The example screenshot below shows me trying to copy one of these files into the folder. Notice the overwrite file warning and the file listing behind it.
In the above shot, I had already figured out that copying the jacob-1.15-M4-x86.dll dll using the elevated command prompt seems to work, it shows in explorer and the applications that depend on it load fine. How could a file be copied into the folder that no Windows tool can see?
View 8 Replies
View Related
Jun 15, 2014
I loaded office 10 and do not know where to find word to open it?
View 5 Replies
View Related
Feb 21, 2014
I'm not sure how far reaching this is but I just noticed that when I select a folder and type a file name in the search bar on the right of the address bar, files are found on my backup drive, which is attached by USB to the PC, this drive is attached because it contains other partitions for file storage.
The folder in this case was on the desktop and it shows that it is on C: Drive, but files were found on the H: Drive which is where I run my backup to.
When I un-attach the H drive the files found do not respond to left or right click.
View 7 Replies
View Related
Jun 8, 2014
When I tried to reset my laptop, it read "could not find the files needed". mine is an Acer aspire V5, it didn't came with an installation disc or media, i know it should have a hidden partition for recovery, but i think the system is having trouble with it. i think a malware might have done this, i got malware bytes, I tried norton online scan and eset online scan, but did not detect any. before this, i experienced my firefox browser icon on the taskbar progressing a download but cant see anything on downloads tab, i closed firefox several times, but it continued everytime i opened firefox, and it did finished its download.
Later i noticed explorer.exe is always having an established connection in TCPview, without me opening any apps. so i thought i really need to reset the computer, but this is my problem. I've already run Dism /Online /Cleanup-Image /RestoreHealth restore health on command prompt, but it showed no integrity violation.
View 1 Replies
View Related
Dec 13, 2012
Windows8 navigation. Can not find familiar file directory to access files, instead apps and app store! Could some one direct me how I can turn off start screen and go back old fashion ways. Else I will have to go back to my Vista.
View 3 Replies
View Related
Oct 28, 2013
Windows 8 search doesn't find files which I know are on my PC as I can navigate to them.
I have indexing on. I search by opening my computer and typing the search name in the top right box.
View 9 Replies
View Related
Nov 8, 2013
I am using Win 8 Pro 64-bit. I am unable to copy some sys files inside C:WindowsSystem32Drivers folder.
Getting message Error-Access is Denied. I have taken the ownership of the entire 'Windows' folder via the Add_Take_Ownership.reg file (which I got from this forum). Even that did NOT work.
I am getting the same access denied error.
View 8 Replies
View Related
Sep 19, 2012
I am trying to be able to see CR2 files (RAW photo files from Canon) as thumbnail icons in Windows Explorer. I am using Windows 8.
Microsoft's codec pack (Download: Microsoft Camera Codec Pack - Microsoft Download Center - Download Details) does not work for Windows 8. When I am trying to install it, I get an error message mentioning that I can use Windows 8 Update function, but doesn't give any more information on how to do this exactly.
View 6 Replies
View Related
Jan 7, 2014
I was on Windows 7, then upgraded to Win 8 then to Win 8.1.
Right now I am on Win 8.1 and I plan on upgrading my PC.
Would I be able to re-use my product key? I hear that OEM ones do no allow this.
So how can I find out if my Win 8.1 is an OEM?
View 9 Replies
View Related
Jan 14, 2014
I am running a qnap NAS in my home network. I can connect to the NAS no issues at all, I can copy small files across the network no issues. However I want to rebuild my NAS so am performing a backup across the network. I want to copy approx 2tb in a single copy. However when I do a select all, copy and paste, it's only copies about 40gb of the data. I am running Windows 8 ...
View 1 Replies
View Related
May 5, 2013
i'm looking for a command to find out my PC heat via DOS .
View 9 Replies
View Related
Oct 30, 2012
Purchased a new HP notebook yesterday and to my surprise there's no product key on the unit. Called HP and according to them, that's the new way of doin' biz..no longer placing product key on chassis. how to find the product key?
View 9 Replies
View Related
Jun 2, 2014
I can not find an excel file I created a few weeks back. Is there anyway to do search so that all excel files are displayed?
View 4 Replies
View Related
Oct 17, 2013
Why can't I find the update in the Store? 2 possible reasons are listed in the article:
1) Your PC needs another update, KB 2871839, After checking for this update and not seeing it I still received the 8.1 update via Windows store anyway & downloading now.
2)Some editions of Windows 8 don't support the free update to Windows 8.1.
View 2 Replies
View Related
Mar 26, 2014
The only thing I can find is right clicking the start button and clicking programs, but all this does is bring up the uninstall screen, which has no option for simply opening programs. I need a start button like on Seven. Windows 8.1 is what I have
View 9 Replies
View Related
Nov 1, 2013
Why have MS made search so damn difficult? I am trying to find all videos in my computer and I simply cannot. It only finds the videos in the generic my videos folder. Damn I am so frustrated I want to throw my brand new laptop out the window. By the way I am using Classic shell and never use metro nor want to. Search in win 8
View 9 Replies
View Related
Dec 13, 2013
I just bought a new computer with W8 installed. This is a big step from XP that I've been running for quite a while. I had two drives (both 500Gb) in the old box, and I'd like to use them in the new. When I try the old drive with boot tracks as an internal - the new box has three spaces for HDD internally - the computer won't even boot. Once I remove the drive everything is back to normal. I have a USB3 external drive case that I installed the same drive in, and, although W8 recognizes I have a USB3 device connected, it's as if there's nothing inside. I've tried doing what I'm told in Devices and Printers (right-click, etc.) but still nothing. The one thing I do see is "Drive E:" in a shaded box to the right of the description, but I can't click on it. Since the drive has five drive assignments (C: through G, I would think whatever happens those assignments would show up in a description of the drive. I don't get anything. I would think as long as I don't try to boot from the old drive (via boot from external, etc) the boot tracks on the drive would not have any meaning - right?
I would like to be able to use some of the software I've downloaded in the past and installed on the XP computer. That's the main reason for trying to use the drive. All the software I downloaded is located in one of the virtual drives (G, and I want to copy off those that are of value to me now.
View 1 Replies
View Related
Mar 24, 2014
I upgraded to Windows 8 from XP a week ago and have not found the differences too difficult.
However, I have fiddling about for hours trying to find a way to have more than one window to view.
What I am trying to do is view my electric/gas & at same time I have my excel spreadsheet open on top, so I can input figures. In XP I was able to to do this.
In Windows 8, I seem to be permanently in full screen view & keep losing previous windows and I do not have tabs in the task bar or anything else to say what is open. Have I missed some setting? Controlling the windows.
View 9 Replies
View Related
