I'm having trouble with the environment configuration on my new Windows 8 machine, I don't remember running into problems like this on 7, but I can't seem to find much useful online..
I have 4 dll files that need to go into the WindowsSystem32 folder in order for one of our applications to run. This is done through an Advanced Installer package I created, which will not allow the installation unless the user has administrative rights (it deals with Windows Services as well). One of the steps is to copy these 4 dll files, which it apparently does without any errors.
Herein lies the problem.. Technically, the files do indeed exist, as seen in the Bash shell screenshot below:
While they are quite simply not visible through either Explorer or command prompt, even when run as an elevated command prompt. The example screenshot below shows me trying to copy one of these files into the folder. Notice the overwrite file warning and the file listing behind it.
In the above shot, I had already figured out that copying the jacob-1.15-M4-x86.dll dll using the elevated command prompt seems to work, it shows in explorer and the applications that depend on it load fine. How could a file be copied into the folder that no Windows tool can see?
Manage Permission Inheritance in Windows 8 | VISHY Media on technologies and gadgets
Ever get this message or worse, one that does not have the access button attached? you cannot read it, you cannot look at it and you cannot delete it.
There are even worse issues where the permissions are GREYED OUT and you cannot do anything to them. (see below for a solution)
Windows 8 Consumer Preview has a robust permissions scheme that is more geared towards business users rather than err, consumers. An inherited permission means that Windows 8 set the Permissions on a volume, drive, or folder, that same set of permissions will be applied to all folders underneath it.
The solution is to ENABLE INHERITANCE to the volume drive or folder to gain access:
Another solution is to ADD a group called Everyone and give them full control:
Finally, there will be folders where everything is GREYED out in the permissions tab so it seems to be impossible to make changes. EDIT: Check below to see possible solution!
This REALLY sucks and the only solution I have found is a reg hack called "Take Ownership"
Add "Take Ownership" to Explorer Right-Click Menu in Win 7 or Vista - How-To Geek
Install the reg (right click and install) then right click on the folder or drive and select Take Ownership. That will allow you to go back into permissions and select full read/write controls by users.
I set up my administrator account and standard user account. Both are Live. Alienware Laptop. On the standard account, users can not even run a game (original Fable that requires disk to start up) without it asking for my password. Which is not always convenient seeing as how I work and all. How do I allow standard users to run programs but not make changes to the computer? So far I have not seen any threads about this. I've been going around in circles in control panel searching for anything that would allow me to grant permission permanently but so far I have found nothing.
The Windows 8 starts it seems that i loose the permissions to the temp folder. As a result some applications using that folder to launch (for example Google drive) fail giving me an error. Another example are some installation files not starting because the temp folder cannot be used.
So, i have always to go to temp folder and manually set the permissions to have all working.
Two user accounts, both administrator level. I have a file in my documents that my wife's account can READ but cannot SAVE. I've gone in through User Accounts and given her account full permissions (full control with all the boxes checked), but it always reverts back to her not being able to save any file in my directory.
FWIW, I have all accounts on a separate D: drive. Only windows 8 and programs are on C:.
Also, Read only status. I see the dot (not a check) when I select properties from "my documents". I remove the dot, task window comes up and all the file names whiz by. Then, I look and ... again, the dot is present.
What is the purpose of the dot vs the check mark. They seem to have the identical effect on sub-directories and files within sub-directories.
I have a big problem in homegroup configuration. To Clarify this is my set up:
Router is in the living room. Computer PC 1 connected via ethernet cable in the living room. Computer loptop 2 in bed room connected via wireless.
When computer 2 is connected via ethernet cable to router, homegroup is working and every thing is ok. but when use WiFi, I can't access to shared files.
I have two different Microsoft accounts on my Windows 8 machine, which is a laptop. One of them is an account I got from my ISP and has been in use for years but that one is disappearing in a few days (I think) because I cancelled my account with my ISP. The other account is one I created within the last couple of weeks.
In transitioning to the new account, I'm finding it considerably more work than I expected and wonder if I am ignorant of some easier ways of doing things. For instance, I was surprised that the applications installed under the older account aren't visible under the new accounts. Is there an easy way to make them visible or do I really need to reinstall the same applications under the new account from scratch? For example, let's say I have a game like Taptiles on the old account and want it visible under the new account: do I really need to do a fresh install under the new account? Or is there an easier way to be able to play Taptiles from the copy I originally installed under the original account?
Also, what is the easiest way to pass data back and forth between the two accounts? I did a copy within a file on the original account and switched to the second account to paste that information in and was disappointed to find that it was not possible. I ended up sending an email to myself then copied from the email on the newer account. It struck me that there must be a better way but I'm not sure what that would be.
Also, with respect to XBox, some of the XBox games had accumulated fairly substantial scores as a result of playing the daily challenges. Is there any way to roll the scores from the old account into the new account, even though they have different "gamer tags" (the ID by which I am known when I play TapTiles or Mahjong or whatever)?
I have two networked PCs. On PC1, I have a program file (.exe) that I want PC2 to be able to access, open and use, but not copy or move from it's location. What would be the best permission settings to adjust on PC1 to protect the file?
My brother brought his PC to me with the above error.
The rest of it is File: BCD and error code 0xc0000034. And of course being my brother he did not make a recovery CD. There is also no windows twenty five digit serial number sticker on the case.
Alright, so after restarting my Toshiba Satellite L50A16H Laptop (Windows 8.1) it gave me a blue recovery screen,
it stated: The Boot Configuration Data file is missing some required information. File: BCD Error Code: 0xc0000034
Unfortunatly I haven't made a backup or recovery file to boot my computer from so I'm stuck with the issue of finding a windows 8 iso file that matches my system, i tried getting the windows 8 iso from microsofts website but it asks for a product key before it lets you download the file, the problem is that my product key is built into the laptop and Toshiba has not provided me with the key on a sticker on the bottom or through any other method. apparently its built into the BIOS. i have a 16gb USB stick that i can boot from. using a key finder is obviously not an option because i cant start up the laptop. I was also wondering if i manage to find a windows 8 iso file to boot from, will my toshiba laptop automatically fill in the product key for windows 8 as i dont have it.
The computer is an ACER Aspire 3. 4Gb RAM. 500Gb memory.
I've been using the computer for a month and a half more or less and everything went OK only few small problems but 2 days ago. It did not Boot.When starting the PC the following appeared:
Recovery Your PC needs to be repaired
The boot configuration data file is missing some required information. File:BCD Error code: 0x000000d You'll need to use the recovery tools on your.....
The first thing I did was creating a bootable USB with Windows 8 software, it did not work. SO i used Rufus, it worked and launched the Windows 8 installation and recovery but when I tried to recover, refresh, anything it told me the disk was locked... or anything the only thing I'm able to access is Command Prompt.
I've been trying some commands that I've seen online but no luck so far. Some commands tell me "OK, successfully something" But when reboot and I change to default the boot order and UEFI then the same error appears.
I had to buy a new laptop that I could take with me to work, and of course it runs Windows 8 (which I absolutely hate, incidentally). I decided it would be nice if I could share files with my primary computer when I'm at home, which is a desktop running dual-boot Win7 and Ubuntu.
I initially set up a homegroup, but whenever I try to access laptop files from my desktop it always pops up with a "enter network username and password" dialog. I tried looking up solutions to that but so far haven't found anything that works. I made sure the clocks on both computers were the same, and I made sure that all network settings were the same on both, including the setting "do not use user accounts/passwords," but I'm still having the issue.
So, what's the best way for me to share/sync files on my laptop with the desktop's files while I'm at home?
I got this msg tryng to refresh my pc . because my vaio gate app wasnt working right . so after the restar i just got the blue screen with this error the boot configutating data file dosent have valid infomation of an operating system.
I'm trying to download some DLLs to use for my Paint Shop Pro program and I need to put them in my System 32 files, and I can't find System 32. I new at working with this Win 8. I received the 2 dlls in a zip folder. I opened them and saved in a folder in Documents. I tried to right click on extracted file to find the System 32 files that way, not there. I went to extract and tried to extract to, and tried to browse to System 32, but I just could not find the System 32. I saw Programs and Programs (68) but no System 32 .
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
So I usually copy the sysinternals suite to /windows. This in order to make it easy to use the tools in bat files and soI can quickly open them. Any ways in win 7 I didn't have a problem with this.
In win 8 I had some issues copying these files to %windir% but system32 was fine. I think this was due to my av (agnitum) preventing this. Not sure though. Any ways, now when some of the tools are updated I try to copy the whole suite again. Only it only works with overwriting the previous files if I copy over 1 file at a time. Sometimes it seems to work if I pull over 5-10 a time. But always works 1 at a time. This is one of the weirdest issues I have encountered. And yes, while doing this my av is disabled.
Accidently deleted my administrator access and i really dont know what to do , I did try almost everything but i just cant use it anymore , I cant restore because i need the permision but i deleted it.
Sometimes when I boot Windows 8.1, I get a generic screen that tells me that my profile couldn't be accessed and I now have a temporary profile. I went to the event viewer and it also said that it couldn't find my profile. I am the only user and administrator. Is there a way to make a new user profile AND not loose my files and settings.
I foolishly changed all user accounts to standard in netplwiz and am left with no admin access -- Is there a way to create one, or restore the original?
I have a Dell laptop running Windows 8. It is 3 months old.
I have lost my admin rights to the computer - I cannot make changes. Therefore, I cannot do a system restore.
I tried booting up in safe mode and turning on the admin rights via command prompt and typing "net user administrator /active:yes". It tell me 'access is denied'. I think it said "error code 5".
It may or may not be coincidence but I had installed Classic Shell a week before this problem occurred.
My son decided to give my mother his new (then) PC...She has a slow dial up and in the transition of adding her as admin and deleting him the network failed long enough to not allow her admin status to take effect but oddly enough allowing him to be deleted as admin....no big deal I thought (clueless as to the throttling grip MS has added to 8)...to date,I have tried everything to resolve this issue but foiled at every turn.
Problem is the YES button is never highlighted in every event to add an admin password.I have followed pretty much most "solutions" only to be be mocked at the finish line with no YES button.
By the by...I have since bought the Princess Bride and myself laptops each with Windows 8 and was quite happy until I upgraded to 8.1 and lost my desktop pic...???? Bizarre...goneski...and after searching forever found the pix in some obscure folder not of my making...What is this dark majic you dabble in Mister Gates?
I had to restart a computer on our office network which uses Windows XP on Wednesday, September 17, 2014. Now I cannot access a file on a computer which uses Windows 8 unless I tell the Windows 8 computer to let EVERYONE access the file - which I don't want to do. A computer using Windows Vista on the same network has had no problems. I've created a new username on the Windows 8 computer and given the problem computer that name but still no access. I've enabled read/write file sharing and given the problem computer full access permissions but still can't get in. I removed all Microsoft updates that had been installed four days before the problem occurred on the Windows 8 computer and recovered the Windows XP system to the day before the problem occurred - still can't get in.
Windows8 navigation. Can not find familiar file directory to access files, instead apps and app store! Could some one direct me how I can turn off start screen and go back old fashion ways. Else I will have to go back to my Vista.
I was annoyed by how Windows 8 keeps sharing folders on any network I connect to, so I did some digging on Google and found a post on how to disable network sharing. Someone also mentioned how changing Users Permissions / settings would things further, so I went ahead and changed those (I got a whole bunch of prompts to confirm changes and accepted all of them).
Now I can only access some areas of my computer but I can't run a lot of programs and I also can't access my C drive when I go to "My Computer" and try opening it from there.
When trying to access C: I get the following error "C: is not accesible. Access is denied"
Also, several programs aren't running anymore and I get a message saying something like "path not found" (see attachments)
When I check my User Account (control panel, user accounts) I see myself as "Administrator" but I cant change any settings there either (for example, when I click on the "change your account type" link, nothing happens (no new window opens and no error message).
I've tried everything, including installing "takeownership.reg" but I can't even instal that ! (see attachment)
I've also tried restoring the system to a previous restore point but can access any (including when I reboot using the "Shift" key).
I have a admin account and a normal user account say XXX.
I have a drive (say Z), to which I want to restrict access to the user XXX. The user should be able to read the documents and view the videos in the drive. However, he should not be able to delete/modify the files in the drive or write new files to the drive.
I have gone through: Permissions - Allow or Deny Access to Users and Groups in Windows 8. I'm not comfortable with command prompts or registry keys, so I tried option three (Change Access Permissions in Advanced Security Properties).
By default, the user had permission for "Read, Read & execute, List folder contents" only. However, even with these I found that the user could delete and modify the files/folders in drive Z. So, I denied the following: "Create file/folders, write attributes/extended attributes, delete subfolders/files". This seems to serve my purpose.
Now I wish to know two things:
1) Am I doing the right thing or messing up something? 2) There was a radio button "Only apply these permissions to objects and/or containers within this container". This I had left unchecked. Should I check this? The window (see attachment) clearly states that these permissions apply to "this folder, subfolder and files". Is this just a redundant option?
I have windows 8. My computer set up as me the administrator, and another user account for my kids. My problem is, when i log into the kids account, and click the mail app. i can see my hotmail account.
So basically they have access to my emails. which i don't want to happen. How do I stop other users getting access to my email ?
Is it possible to assign a Microsoft account to a user for the SkyDrive access but use another Microsoft account for the same user (logged in and active at the same time) for access to their Hotmail email via the metro Mail tile and their settings and Microsoft store, etc.?
