Hardware Drivers :: System Can't Find Windows 8 OS Unless Disconnect External HDD?
Feb 7, 2014
I have a new internal HDD. When I first put Windows 8 OS on it I needed to disconnect my External HDD because I was getting the error (don't quote this):
"Can't find operating system. Disconnect any drive that doesn't not have an operating system."
It booted fine when I disconnect the External HDD.
It stopped doing this until today. I need to disconnect it when IU reboot.
I believe I ejected the External by mistake and tha6t5 screwed everything up again.
I entered the BIOS and I don't see the External HDD there. Only my internal and my cd/dvd drive.It currently looks for an OSA on the cd/dvd first.
View 1 Replies
ADVERTISEMENT
May 1, 2013
I have purchased from a local electronics store, an after market HDD drive housing to enable me to use a surplus 450GB IDE hdd from a now defunct computer.
Once assembled I plugged it in ( it comes with its own power pack , and uses a USB cable to connect to the computer)
Windows 8 knows it is there and installed a driver called - USB to IDE bridge. there the problem starts
I am unable to see the drive in explorer or anything . either as a mass storage device or an external drive.
Do I have to register the drive or anything , and if so how - shouldnt Windows 8 do this automatically ?? I have another HDD ( more modern one ) and windows see's that straight away.
View 9 Replies
View Related
Jul 24, 2014
I just bought my new PC, and i got a problem with it: My Logitech K350 Wireless Keyboard randomly stops responding or sending keystrokes to the PC, its likes it lags or disconnects randomly, its very weird. I installed latest drivers, did plug in/out the receiver from different ports to others with no luck.
View 3 Replies
View Related
Jan 15, 2014
How can I find express cache drivers for Windows 8.1 ? I've been searching for long time but cannot find any. I assume it's already installed with Windows or what? I just want to use my SSD(24GB) as an express cache. I have an Ideapad y410p.
Sometimes my SSD disappears like unplugged from the system or shutdown itself, why this is happening?
View 4 Replies
View Related
May 5, 2013
i am currently using windows 7 .i m planning on installing windows 8.I have a i3 machine with intel DH55PJ board.when i went ti intel website i didn't see any network graphics or audio drivers for windows 8. is their any way i can use windows 7 drivers in windows 8.
View 3 Replies
View Related
Feb 3, 2014
I have windows 8.1 and cannot find system restore.The last windows update has changed some things on my computer and I would like to go back to an earlier date.I search for the restore,but only get my bookmarks file.The update has changed my zip files icon to a sheet of paper that I cannot open or extract. There is a system restore. I should add I have the classic shell not the original windows 8
View 4 Replies
View Related
Oct 9, 2013
Is there any way to enable it or to be able to find it?
View 5 Replies
View Related
Mar 28, 2014
I bought a new laptop with a Windows 8 Pro x64 pre-installed on it.
Then I upgraded my OS to Windows 8.1 Pro from Windows Store.
After that I thought I'd create a backup of my system so I don't have to re-download the Windows 8.1 upgrade and at the same time having the option to reset my laptop to it's old operating system in case I want to, so that being said, I created a system image backup using Windows' Imaging Utility and pointed it my external drive. It took a couple of minutes and the image was successfully created.
I double checked the image file and I can see it on my external drive saved in a folder called 'WindowsImageBackup'. The backup files is approximately around 35 GB.
I also tried using the System Image Recovery option from BIOS to check whether the backup file I created really works, and it did because it was recognized by the system through the dialog box "Re-image your computer".
My mind was set that if anything bad happens to may laptop, whether if it got infected with a virus or the operating system crashed or even if the hard disk gets broken I could simply put it back to it's previous state using the backup image I created. So I played with the partitioning of my laptop, I even installed other operating systems for educational purposes, but when I finally wanted to bring my laptop to its previous state I failed...
The System Image Recovery from BIOS that once recognized my backup image throw an error at me saying the 'Windows cannot find a system image on this computer'. How can I fix this error? Is there still a way to recover my laptops previous installed OS or is it gone for good?...
1. Download bootable USB 3.0 drivers and tried to load the drivers on the during System Image Recovery. I think I got that tutorial here in this forum also but not sure, anyways it says that my external hard disk might not properly load because windows does not support usb 3.0.
2. I tried installing macrium free to re-image the vhd files from my backup image and tried to use the new image created by macrium to backup from. Re-imaging and backing up from the macrium image is successful but when I restart my laptop to check whether the backup works, I got an error saying 'Your PC needs to be repaired... Error code: 0x0000225'. I boot from my rescue disk and open up the command prompt to run a command like 'bootrec /scanos' but the result says detected windows installation is zero (0)...
View 6 Replies
View Related
Oct 14, 2013
I am having problems with system imaging my Windows 8 machine to an external hardrive via a usb (??) cable.
First, as mentioned in another thread is the exceptionally long time. The external drive is a WD 1TB BTW. I have two older hardrives on the computer. Just installed the second, which at this time is not being used. Trying several several programs, Paragon Free, Easeus, Macrium Reflect and the built in Windows Backup I was getting 14 hour estimates.
The actual issue I wish to resolve is that during a over 9 hour backup of the primary drive with approx. 34GBs, I noted what appears to be a folder with the Windows backup icon called the name of my computer on my external drive. It contains approximately 3GBs of data in multiple folders. Windows backup is turned off. I did not have this file on the external hardrive and I didn't initiate the OS to perform this. It showed no indication of running and occurred during the Macrium backup.
View 9 Replies
View Related
Sep 20, 2014
I had a windows 7 laptop which finally died but before it did a made a system image backup to my external hard drive so I have all the files. How do I load that onto my new windows 8.1 laptop so I have all my files there?
View 4 Replies
View Related
Jan 4, 2014
I tried using a batch file to run ccleaner at log on. But it always takes forever when it cleans Firefox. So I made a batch file to just delete the Firefox temp folder. And I unchecked Firefox in ccleaner so ccleaner ignores Firefox.
Here's the batch file.
Code: RMDIR 5bngz3ew.default /S /Q
I put it in the task scheduler. When I run it it says it cant find the file specified (0x80070002). I set the task to run with highest privileges. But every time I run it it gives that error. I don't know why its giving an error when it deletes the folder. So it works fine. I just want to know why its producing an error.
View 2 Replies
View Related
Oct 24, 2013
I keep getting this upon opening my win 8.1 event viewer and how to get rid of it here is what it says.
microsoft-windows-dxptaskringtone/analytic the system cannot find the file specified.
View 9 Replies
View Related
Jul 16, 2014
I am on an i7-12gb RAM+SSD Asus laptop, running Windows 8 x64. I am using two external HDDs attached via USB. One is an external-powered 2TB 3.5" WD, and the other is a 1TB 2.5" 5400 rpm Matshita HDD.
I store my music and movie collection in these drives, and a few setup files for the programs that I use.My problem is, from time to time when I boot up my computer, I start my browser, Word, iTunes, even Snipping Tool, etc. or when I need access to some function in a program (e.g. language proofing in Word, some function in Photoshop CS6, etc) my laptop randomly needs to access one, or both of my external drives and read something from there. I hear the whirring sound from the HDD and then my laptop starts responding again. This does not happen all the time, but it happens frequently enough to spoil a good workflow a few times during the day.
My external HDD's are slow in access times, and the 2TB WD actually shuts itself off after a non-use period and takes 6-7 seconds to turn back on.
So this translates into me randomly waiting for 6-7 seconds while using my laptop.
This case has been the same since using Windows 7 and through a few fresh installs.
I want these two HDD's to just store my files and not interfere with my OS' working.
View 9 Replies
View Related
Jul 27, 2014
Few days ago I bought a new Lenovo Thinkpad Edge E540. It has two USB3.0 ports and one USB2.0. I bought the machine without OS and installed Windows 8.1 Pro(x64) myself. Everything seems to be working fine except when I want to use My WD Elements 1TB external HDD in USB 3.0 port. It just doesn't get recognized. In USB 2.0 port it works fine.
What I've gathered and tried so far :
- Device manager does not show anything not even Unknown Device , yet my USB 3.0 Kingston pendrive works fine out of the box in the same slot
- I'm pretty sure the USB power is not the issue because the WD HDD , when plugged, starts blinking for a while , then lights up fulltime and i can feel and hear the drive spinning
- I've disabled USB selective suspend in my Power plan
- I've disabled Fast Startup
- In msconfig , im stuck at "Selective startup" (if changed it doesnt even let me APPLY and switches back to Selective right after I close/change tab in msconfig, I tried doing it in safe mode , same thing)
Using my harddrive in USB3.0 speed is essential for me.
View 5 Replies
View Related
Sep 15, 2014
I just installed W 8.1 recently. It's having incompatibility issues with my Patriot ram stick. I contacted Patriot and they want my motherboard model. Problem is I can't find my motherboard model on 8.1
I looked for system information but they removed it. I'm going to all these sites that lead me to downloading these third party apps I don't even trust to find it.
Why exactly they removed system information? It was a very useful and easy tool to go to find information on your CPU. It seems like I'm one of the few who have that issue since I see only a few complaining about it though.
Anyway, I need to find motherboard model without disassembling my PC.
View 9 Replies
View Related
Feb 18, 2013
Recently i upgraded my system to windows 8..N after clean install i backed up the copy of my C drive (Includes System Image) to my external 2TB Hard Drive.. It took around 250GB of hard drive space..Now since i am running out of space i decided to delete the back up copy from My hard drive.. I deleted WindowsImageBackup and all associated files using control panel..But around 150GB space is missing(not visible) from my external Hard Drive..
As You can see from attached pic that 125 GB free out of 1.81TB..But size of all files including hidden files is 1.53TB..
View 3 Replies
View Related
May 19, 2014
I created some windows 8 system images(Using the internal system image tool). Now I find restore points more useful, but I would have to turn the system protection on for an external hard drive. The problem is that I don't understand the sophisticated message Using system protection on a drive that contains system image backups will cause other shadow copies to be deleted faster than normal. Does it mean, that under some circumstances my manually created full system images could be deleted to create a restore point? I would like to keep the system images. Also, I hope it doesn't override existing directories on this harddrive, but I don't want to try it out without being sure.
View 1 Replies
View Related
Apr 4, 2014
Win 8.1 ProThe system allows system image backup done on either external hard drive ( which I do every week ), or on DVDs. Why it does not allow USB flash drive ? I tried to use a 32 GB flash and it refuses to do backup on it.
View 11 Replies
View Related
Sep 15, 2013
HP Envy dv7, Windows 8
Seagate 2TB drive mounted in a Thermaltake, Max 5 enclosure. The drive does not show in Windows 8. Does show when running Disk Management (diskmgmt.msc) but shows as "Unallocated" without a drive letter. If run the Seagate drive tools, it shows up as unallocated, with drive letter "C". But there is obviously already a drive "C".
Disk Management does not present a means by which to assign a drive letter
View 8 Replies
View Related
Jul 12, 2014
Yesterday I formatted my computer and today I was updating it to Windows 8.1 again. Everything was fine except I forgot to disconnect my hdd. During the update, it said it was detecting and fixing errors. When the update finished, I tried to open my hdd and it wasn't accessible. How can I recover the data?
View 7 Replies
View Related
Jun 28, 2013
How to Backup Windows 8.1 ? I can not find the option to repair disc and system image .
View 9 Replies
View Related
Jul 21, 2013
I have a Sony Vaio all in one but it doesn't have a cd drive. I've purchased two and neither were recognized by Windows 8. Can found a USB optical drive recommended?
[URL]
View 2 Replies
View Related
Mar 16, 2013
I'm currently using a Dell Inspiron 3520 laptop with Windows 8 on it. I have an external hard drive from a Windows 7 desktop. It recognizes the external hdd right away and I can access it but I can't figure out how to boot Windows 7 as the primary. I've tried changing boot order in bios but I've had no luck as it still boots Windows 8 first. Is there a way to use the Windows 7 as the primary drive ? Even a way to temporarly turn off the Windows 8 hard drive will work. I just need to access the Windows 7 hard drive without having to navigate through program files to have to open something.
View 9 Replies
View Related
Sep 15, 2014
I have this external hard disk of 500Gb of Verbatim. Previously it was of NTFS format. Then I had converted it into Fat32 because I wanted to write stuff on it from MAC. I transferred movies, pictures, videos, songs, etc in it.
Now, I use Windows 8.1. I connect this hard disk. I hear the sound of it getting connected. But then I can't access the hard disk. As in my laptop doesn't read the hard disk. I read a few posts regarding converting a hard disk from FAT32 to NTFS wiithout losing the files. But I was not sure whether I have the same problem.
I want to transfer all the files in my hard disk to my laptop.
View 9 Replies
View Related
May 9, 2013
Where to get the relavent OpenGl Drivers from for windows 8 ? Apps designed for Windows 8 are fine , anything which did play on Windows 7 (minecraft for example) just gets the same error message, "Bad videocard drivers! failed to find an accelerated OpenGL mode ".
View 8 Replies
View Related
Apr 20, 2013
I recently purchased a WD 1TB external portable hard drive.When I first got it it was immediately recognised by my laptop (a 2 day old Asus Ultrabook S400C). This is my first time with Windows 8 so I am still learning to navigate it.
The first thing I did was transfer 650gb of movies and music across. I didn't format the hard drive first, maybe that was my first mistake. My files were still recognisable on my laptop and my WD TV Live media centre. The next day all of a sudden my media player wouldn't recognise it and when I plugged it back into my laptop it also cannot see it.
The device can be seen in device manager (when I click on properties it says it's working corectly), but not in the drives list in my computer. It is showing as "Disc 2" 'Not Iniitialised' and when I click on 'Initialise' and choose 'MBR' and hit OK it comes up with this error msg: 'The request could not be performed due to an I/O device error'.
View 9 Replies
View Related
Mar 17, 2013
just bought a new computer with windows 8. ever since its a non stop sound of the usb being disconnected and connected.
View 5 Replies
View Related
Feb 25, 2014
I can't find the Bluetooth option in PC Settings (more probems with Windows 8.1, I'm still not quite legendary with it )
Below is a screenshot of my PC Settings/PC and Devices Other forums said bluetooth was there, but it's not.
View 7 Replies
View Related
Apr 5, 2013
i Am trying to build my first PC with a Asus P8Z68M motherboard I have managed to get it all going but when I start it up its says - Using PCIE Gen 2 - cant find any device. What does this mean? Also, why does the PC beep at me whilst booting up?
View 9 Replies
View Related
Jul 1, 2013
how to move my mouse and use the keyboard at the same time for gaming and what I found it to go on Mouse>Device Settings>Settings...> etc... But on my mouse properties it doesn't show device settings, it shows ELAN, and when I click there there is no settings, it has options.
I can't really explain it so here are some prints:
My mouse properties: [URL]
What appears when I click Options...[URL]
Some info of my laptop:
It's from the PackardBell company.
It's a Windows 8.
It has a multi-gesture touch pad.
View 1 Replies
View Related
May 24, 2013
what is the best routine for going offline and then to reconnect when appropriate. I'm going all round the houses at the minute...
View 4 Replies
View Related
