I have an HP Pavilion g6-1c43nr, anyway, the isssue I am having is that no matter what i do, every time I wake from hibernate or sleep, (on 8 or 8.1, haven't tested 7) It BSODs and restarts....
View 9 Replies
So my computer (HP pavilion HPE) BSOD'ed for the first time yesterday afternoon (running Windows 8.1, upgraded via download from original Windows 7, so I don't have a recovery disc). Along with the error code, the BSOD says that File: WINDOWSsystem32winload.exe is missing or contains errors.
I have tried pressing F8, Shift+F8, and holding Shift on start up, and nothing works. I know I'm supposed to upload dump files with this post, but I can't/don't know how to get my computer to the point where I can access these files. I can access the HP Startup Menu by pressing Esc on start up, which has an option to display System Information (not sure if below info is useful or not...):
Product Name: h8-1160t
Processor Type: Intel Core i7-2600 CPU @ 3.40GHz
Processor Speed: 3400MGHz
Processor Stepping: 000206A7 0000001A
Cache Size (L1/L2/L3): 64kBx4 / 256kBx4 / 8192kBx4
Memory: 8192 MB DDR3 / 1333 MHz / Dual Channel
Channel A: XMM1 0 MB / XMM2 4096 MB
Channel B: XMM3 0 MB / XMM4 4096 MB
Integrated MAC: 386077039221
System BIOS: CHG_711.ROM v7.11
I purchased this laptop (ASUS N550JV) less tan 30 days ago and I've had about 5 BSOD's, all occurring on wake up from sleep.
View 3 Replies View RelatedI updated to Windows 8.1 approximately two weeks ago and now when ever I sleep my computer it cannot wake and will instead BSOD.
[URL]
The above link is to a zip file containing the dmp file from the most recent time this happened.
My Lenovo U310 is crashing with BSOD every time I wake him up from sleep. ntoskrnl.exe (nt+5a440)
Here are reports from my laptop.
my hp pavilion dv6 6514nr sleeps when i close the lid and anytime i try to open it up it it crashes with the BSOD: system thread exception not handled screen i tried using blue screen view to read the dump files but it showed me it had something to do with ntoskrnl.exe
View 8 Replies View RelatedWindows 8.1 ... When I close lid of my laptop and open it again the screen is black. Nothing works to get it out of this. I have power options set to "Do nothing" for both On battery and Plugged in.
So I press power button which sends the laptop to Sleep. Then I press it again to wake it up. And this is when I see the BSOD and laptop restarts.
In minidump I see athwnx.sys and ntoskrnl.exe reported.
athwnx.sys is driver for Dell Wireless 1515 minicard (Wifi and BT). Current driver is from Microsoft, version 3.0.1.155, dated 03/05/2013.
Attached is required info created by SF Diagnostic Tool.
two weeks ago I had a hard drive failure on the stated laptop. I installed an OCZ ssd and reinstalled windows 7 from a retail family pack. I used the Certificate of Authenticity (COA) windows key from the sticker on the HP laptop. This activated no problem. I purchased this laptop new at SAMS club.
I also upgraded two desktop computers to windows 8 that also had this family pack copy of windows 7 installed on them (about a year ago). Both of these computers activated with no problem. I also installed a separate windows media player upgrade on each computer.
I then upgraded the laptop to windows 8. I also upgraded it to windows media player.
I noticed that the key provided during the upgrade was the same provided by Microsoft during the upgrade of one of the desktop computers.
The validation was successful at first.A day later I got a message stating that windows was not genuine. I then attempted to purchase another key and Microsoft stated that I could not purchase a key in my current country or region (I am in Wisconsin).
The website stated that I had to validate windows by purchasing a validation pack at a local retailer.
Why cant I validate windows? I have the COA still attached and nothing is different about the computer except the replaced hard drive.
My HP Pavilion is not letting me use any kind of virtualization software to run on Windows 8. It worked when I had Windows 7 running on this machine but now it won't work now on Windows 8.
View 10 Replies View RelatedI have a brand new HP Pavilion TS 15 Notebook PC and has Windows 8.1 SL.
We are using RDP to connect to our App server. The App server is running on Windows 2008.
When i try to connect to the server the client is showing "Because of Protocol error the session will be disconnected. Please try connecting to the remote computer again "
We have other Windows 8.1 machines connecting remotely to the server without any issues. Tried a lot of fixes from MS but no use.
When I shut down my computer, I get this thing that a program is preventing shutdown. It doesn't tell what's the name of the program, it only says that "This program is preventing shutdown".
Can any hacker see my webcam or my pictures without putting any malware or virus to my computer and without me doing anything so they can see me?
My computer is HP Pavilion 15 with Windows 8.1.
I have a HP Pavillion PC which is connected to my wireless network due to restrictions in the house. I have been having some issues which i suspect are related. Nearly every day now i either lose wireless connection, even though other devices near by have no issues or my outlook stops sending/receiving. I just get the progress bar and nothing happens. The only way i can solve these issues is by a restart which is starting to get tedious now.
I have looked through my error logs and i seem to have this event that pops up...
Closing a TCP socket with local port number 50513 in process 1008 is taking longer than expected. The local port number may not be available until the close operation is completed. This happens typically due to misbehaving network drivers. Ensure latest updates are installed for Windows and any third-party networking software including NIC drivers, firewalls, or other security products.
I have updated my wireless card drivers to the very latest i can obtain. I have even tried plugging in a usb Wireless Belkin adapter and still no joy.
I really want to avoid a full windows reinstall but i cannot carry on like this.
Windows 8.1: HP Pavilion 2475ea Desktop PC.
I have Secure Boot turned off. I have Legacy Boot turned on, but do not think that is needed.
This link gives me instructions to boot from CD but they seem not to make sense from No 2... [URL] .....
In that at 5-6-7 it seems to require me to select the CD then boot to Windows from HDD then restart and do the same again, but this time select CD again, or something??
I expected to set the device, then restart the computer and it would boot from the device, not restart Windows as described. I was able to boot from a WinPE 4b CD.
I then decided to try changing boot order in the UEFI BIOS. From then on the HP (F9) described menu showed 'Windows Boot Menu' only under UEFI Devices. I could only boot from CD after putting the order back to 'Windows Boot menu' at the top of the order list; after which, as long as the CD was in the drive the (F9) list showed the CD drive as selectable to boot from.
My issue is that I have a HP Pavilion G6 2399-sa and it is currently running the HP OEM version of windows 8, I have previously updated to windows 8.1...twice in fact and every time that I have updated to windows 8.1 I get random freezing issues. These freezing issues occur at random times there doesn't really seem to be some pattern to it.
I know that I have to update to windows 8.1 as there are apps which refuse to be installed unless I update ... So what to do because I need to update again so I can use my apps...I do recall reading something about Dynamic ticking I think? It was some command in cmd prompt like bcdedit /set disabledynamicticking yes I believe.
My laptop hp pavilion g6 has been trying to update and it has a blue background saying "Configuring Windows Updates 12% complete" it's has been like this for almost 2 hours now I tried to remove the battery but when it boot it comes back to the update.
View 1 Replies View Relatedhave the following problem on windows 8.1. When monitor after 10 minutes goes to power saving mode it wont' wake up by moving mouse or by pressing a button on keybord. To wake the monitor again i must resart the pc by pressing the restart button on pc. How can i solve this problem? Bios and drivers are updated. For motherboard i downloaded drivers from asus and for gpu i downloaded the driver from amd website
My pc configuration is: CPU- Intel Core i3 2120 @ 3.30GHz
Motherboard: Asus P8H61-MX R2.0
Gpu: MSI Radeon Hd 7750 1GB DDR 5 (R7750-1GD5/OC)
Ram : 8 gb
OS : Windows 8.1 Pro 64-bit
Bought a new HP Pavilion with 8 installed, no CD. New OS and have decided to go back to Windows 7. I bought a full OEM version of 7 and am instructed to format the hard drive before inserting the new OS CD. I am having problems formatting the hard drive with out a OS CD to use.
View 2 Replies View RelatedMy system in HP Pavilion g6 with 64bit processor but am running 32bit. I would like to install 64bit because all the software I need for my project as an Architectural student were all 64bit based softwares. I need a step by step on how to do this.
View 4 Replies View RelatedI have a new Windows 8 hp pavilion all in one desktop computer and since a windows refresh, a month ago, it has stopped creating restore points and it fails to manually create a restore point also.
It leaves a message "THE RESTORE POINT COULD NOT BE CREATED FOR THE FOLLOWING REASON: ACCESS IS DENIED. (0x80070005)".
I have allotted 15% or 66.67 GB for this feature in the "configure" option. The C: drive is the only drive marked as "ON" to be restored. The only restore point listed is for a WinZip 17 installation on the day of the windows refresh, which was as I said before, a month ago. The are no other restore points at all and can't create one.
I have a Pavillion DM3 that I have updated to Windows 8 Pro. I have left the Win7 Home on as well and have a dual boot that I was going to keep until I was happy with Windows 8.
Windows 8 installed OK on a new partition and ran very well. I loaded some other software like Office and Acrobat, and it still started and ran very well. I then let it apply the Windows and Office updates (about 70 items). It then took about 10mins to boot. Thinking I had corrupted something, I tried the auto repair, but that didn't work, so I tried refresh and rebuilt the Win 8.
I reinstall all the items I had installed previously, and applied the updates again, but exactly the same problem - very slow to boot. I have now reverted to Win7 again, and it is all working fine again. I have left the HP System partition unchanged, and as the active drive. I did try various boot rebuilds but that didn't work either.
There must be something in the updates that causes this but I don't know how to find out what.
I followed the steps here: Password Protection on Wakeup - Enable or Disable in Windows 8
It works, but after a reboot and stand-by after a certain amount of time, the option resets itself. This started 1 month or 2 ago.
Also, i notice that in one place it says password wake up is on and another place says it is off.
my current issue is not waking up, every night I put my pc to sleep and the next morning when I click the mouse or push a key either nothing happens or the tower lights up and fans kick on but the screen stays black. and I must power down and restart
I have all new video drivers, I have a feeling it may be my keyboard because sometimes the keyboard doesn't shut down when the pc is put to sleep. It still has all its lights on. It is a Merc steel series gaming keyboard,
The only other weird errors I get in my event viewer are these, and they have to do with windows search.
Eventid 1006 The Windows Search Service has failed to create the new search index. Internal error <4, 0x80070002, Failed to add project: C:ProgramDataMicrosoftSearchDataApplicationsWindowsProjects>.
The Windows Search service terminated with the following error:
The system cannot find the file specified.
Eventid 7023
event id 7034
The Windows Search service terminated unexpectedly. It has done this 37 time(s).
I had this problem for few weeks now. I set windows to hibernate at night then next morning the power turned on my itself. I can't find out what waked it.
I have turned off automatic windows update, maintenance, wake from network adapter. still the same.
I have a HP Pavillion x360 i3 2 in 1 laptop. I am having problems with the wifi staying connected, and when the laptop is connected to wifi the internet speeds are slow. The speeds are slow as in I cannot stream videos on youtube without constant pausing, and even downloading something as simple as google chrome takes much longer than it is supposed to. In my house there are plenty of other devices that are connected including my old laptop, which, has no problems downloading/streaming and iphones, and an ipad.
All of the other devices except my new HP laptop has no problem streaming and downloading. The laptop is extremely new;less than a week old. I have tried updating the network driver, resetting the network driver, and disconnecting then reconnecting the wifi; yet the problem keeps occurring. I do have MacAfee so I guess that could pose a problem, but I am unsure. The adapter I use is a Qualcomm Atheros QCA9565, with internet provided by COMCAST. It could be an adapter problem, but because of the other devices working fine I do not think that the problem is from the adapter. Also, the OS is Windows 8.1...
I have an computer machine called "HP Pavilion" with Windows 8.1 on it.
Every time I start my computer up, my computer keeps saying "Starting Automatic Repair" then 2 mins later the blue screen comes up with a face on it which it might be something wrong with the machine, then the screen goes blank and does nothing.
Any magic keystroke combination for "Sleep" or is there anyway to create one? I know about Win+I then Power then Sleep.
Any option to stop scheduled tasks or other triggers that "Wake" your computer from sleep? I find my computer running in the morning after putting it to sleep at the end of the previous evening! I have reviewed all 41 scheduled tasks created by Windows and installed applications and "apps" and found none that have the Wake Computer check box checked. What's annoying is the fact that once woken the computer does not go back to sleep again! I am using the supplied balanced Power plan.
I have the same problems... Win8 64bit reboot on wake from sleep...
View 1 Replies View RelatedAsus Zenbook ux301LA, i5 Haswell, Intel graphics HD4400, Win 8.1 x64, 2560x1440 display. It came with Win 8, I updated to 8.1. After wake from sleep the scaling is way off, everything is tiny. So I can't use sleep, must do a full shutdown and restart to get back to normal resolution. Asus does not list any graphics drivers for 8.1, only 8. So I got a generic Intel HD graphics driver update from Intel but it didn't fix the issue.
The other strange thing is that it is time dependent. IOW if I wake it soon after I put it to sleep it restores to the correct resolution state. But if I wait longer it doesn't. I put it to sleep and woke it up multiple times and it seems like the change happens after it has been sleeping for about an hour... although I can't say for sure it is always exactly on that schedule. What could be changing in the system while asleep that would do this?
In a way this isn't a big deal since this thing boots up from full shutdown almost as fast as from sleep. But I had intended to use sleep without a password so I don't have to constantly enter that while home, but keep the password on full start up.
When waking my computer from sleep it takes 8 seconds for the screen to come on, then nothing responds for another 25 seconds. I fixed all the errors in event manager, updated the bios, installed all the newest drivers, changed BIOS settings. All to no avail.
All the components (except the MB and CPU) were recycled from my last motherboard which would be ready to go immediately from sleep. My previous build (which ran great) was also Windows 8.1 but the motherboard died. I have no password. The lock screen is disabled. Disabled suspend, and shut off hybrid sleep.
Why the lag? Is there any way to find out what's slowing me down?
MB p8Z77-V Pro
Memory (not on the approved list):
CMX8GX3M2A1600C9 4GIG 2 sticks
CMX8GX3M4A1600C9 2GIG 2 sticks
i7-3770 CPU
BIOS 2104
OS Win 8.1 Pro on a Kingston SSD, data on a Seagate Barracuda ST3000DM001
NVIDIA GeForce GTX 650 Ti BOOST
I have a HP Laptop Pavilion Windows 8. Recently I caught the Highlite App. I finally was able to remove it, after trying every malware and adware remover I could think of. After I finally got rid of it, and all of it's annoying pop ups, the laptop and browsers work great for about a day and then the internet started freezing and I will get a "Google Chrome (Not Responding). It will also do the same thing with IE and Mozilla, but Chrome seems to be the worst of the three. Sometimes it's so bad, it's not usable. I updated Flash Shock wave yesterday, but it hasn't seemed to work.
I'm on Mozilla now. I got lucky.
A couple of days ago, my HP Pavilion g7-2233cl laptop, running Windows 8, started looping at startup. I shot a brief video showing a few loops and posted it on YouTube: [URL] ....
Because of the looping, I am unable to input any commands through my keyboard or mouse once the looping starts. So, for example, I cannot get to Control Panel.
I was, however, able to click on Escape during a startup and run a hardware diagnostic. No hardware problems were found.
Sometimes, after looping for quite a while, the computer freezes up. It stops looping but then won't let me do anything else either.
This problem does NOT seem the same as the "Automatic Repair" issue I have seen described on YouTube. By the way, I also have Windows 8 running on a desktop computer.
