Setup Installation :: HP Pavilion - How To Format HD To Revert From Windows 8 To 7
Feb 1, 2013
Bought a new HP Pavilion with 8 installed, no CD. New OS and have decided to go back to Windows 7. I bought a full OEM version of 7 and am instructed to format the hard drive before inserting the new OS CD. I am having problems formatting the hard drive with out a OS CD to use.
can i revert from windows 8.1 to windows 8 i do have a recovery flash drive with windows 8 and i do have a recovery programme on my acer aspire V3-571.
I have Windows 8 in my desktop PC and want to format my hard disk's partition where windows 8 is and install Windows 8.1.
For this, I have a bootable USB with Windows 8.1.
When I try to access BIOS to change the boot order of the PC, pressing DEL (as I always did without problem in previous versions of windows) sends me to a blank screen. The BIOS never load. I tried waiting more than 30 minutes. It wont load.
I also tried clicking RESTART while holding the SHIFT button to access the advance options, but it doesn't show the UEFI Firmware setting that it was supposed to.
Finally, I tried to enter through the PC SETTINGS in the charm bar, but it doesn't show the Update and recovery option I was looking for.
My system in HP Pavilion g6 with 64bit processor but am running 32bit. I would like to install 64bit because all the software I need for my project as an Architectural student were all 64bit based softwares. I need a step by step on how to do this.
just upgraded to 8 from XP. I have a recovery drive for XP. Can I reformat this recovery drive so I can use it to install & recover Windows 8 instead if I have a problem in the future?
Me and my girlfriend both have recently bought new laptops that came with Windows 8 installed (HP Pavilion) but wiped the drive and installed Ubuntu straight away without booting Windows 8.
Now that 8.1 is out we want to give it a chance. I see I can download 8.1 preview from Microsoft but it comes with a product key, so I'm guessing that it will expire once 8.1 is officially released, but both laptops had Windows 8 preinstalled so they should have an embedded product key, correct?
Is is possible to install 8.1 preview and get it to use the embedded product keys, or do I have to buy a HP recovery disc and use that to install Windows 8 on both laptops, then update both to 8.1 through the store?
Also, if I was to buy a Windows 8 DVD in store (only about 20 more than a HP recovery disc), could I use that to install Windows 8 on both laptops (using the embedded product keys), and then use the product key that came with it to upgrade a family member to Windows 8?
I have 2 HDs that have the Windows 8 System Reserve partition. Can't use them as a system disk because no matter what I try it wants to repair the Windows 8 OS.
I am attempting to install Windows 8 (I currently have Vista) but Autorun doesn't work and when I attempt to access the disk in the CD ROM I am asked if I want to format the empty disk. I recently had to reformat the hard drive back to its factory settings (Vista O/S) for reasons I won't go into. The problem isn't limited to the installation disk.
I set up cursors for the mouse pointers and save the changes, then the next time I reboot they revert back to the default settings. Is this just Windows 8?
When I installed the free upgrade from Windows 8 to 8.1 I tried to access a web page I use for work and now I can not read it. When I was using Windows 8 I could read the page every time. Now I cant. My question is: can you revert back to Windows 8 from 8.1.
I would install it on my Dell laptop running Windows 7. If after using Windows 8 for awhile, I may decide I like Windows 7 better. How is it possible to revert back? I read that once you do an upgrade the license of the older OS is lost according to this reference:
[URL]
which is quoted here:
"If I use a Windows 8 Upgrade disc/download to upgrade my Windows 7 computer to Windows 8, can I then use my old Windows 7 disc and product key to install Windows 7 on another computer?"
No. The Windows 8 Upgrade license replaces the previous Windows 7 (or Windows Vista or Windows XP) license.
To be clear: your old version of Windows that you upgraded from can no longer be used on your current, or any other, computer.Click to expand...
My son has an MSI Laptop running Windows 8.1. Following a recent Windows update (he cannot be more specific) he is no longer able to use his Admin (the only one) account. He sees the mouse pointer but the rest of the screen is black. Ctrl-Alt-Del does bring up a panel offering the usual options to shut down, reboot, Task Manager, etc. - but when I select Task Manager with the intention of seeing what processes are running,the dialogue does appear, but before it is properly displayed it vanishes.
Meanwhile the HDD light is burning constantly. If I simply leave the machine for 30 minutes or so, then the HDD activity subsides but there is still a blank screen. Moving the mouse pointer to the top or bottom right hand side of the screen has no effect.
Unfortunately we did not have the wits to set restore points Interestingly the other account (not administrator) is working without problem.
So, after decades of using Windows I've just discovered the single most destructive command... The CTRL+Z... Yup, that's right.
So here's the problem. I always leave my computer on 24/7, and today I was in a application trying to undo something, but I didn't notice the application was out of focus and I was in fact "undoing" several actions I've made in the last days... Absolute disaster - I accidentally deleted Gigabytes of information and I've no way of getting them back... The worst part is, I don't even know for certain what I've deleted, as I don't exactly recall what I did in the last few days.
My question is, is there a history/log of the undo actions? I've already checked Event Viewer and there is nothing there.
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
I signed up for a DNS service a while back. When I stopped using their service I removed their DNS entry from the ipv4 settings and considered it done (this was all they stated for install/uninstall, just update the DNS in ipv4)
At random, the PC will revert back to their DNS server. I have no virus (Malewarebytes Pro), my hosts file is empty.
Here's what I've done:
1) Removed it from ipv4 settings manually and reset to Obtain DNS Automatically
2) Open cmd as admin and ran the following sequence:
ipconfig /flushdns ipconfig /registerdns ipconfig /release ipconfig /renew netsh winsock reset netsh int ip reset
3) Reboot
On reboot, everything is normal, anywhere from 24 hours to 30 DAYS later it automatically reverts back to their DNS servers. I am on a .edu domain. I do not have access to the router, but I never modified anything in the router. Why my PC keeps reverting to their DNS servers?
I have acer windows 8 laptop, I tried to install windows 8 Pro on OEM windows 8 partition after I formatted the partition and I ran windows 8 Pro installation media but at the partition selection and after I selected the ntfs partition I got error that "windows cannot be installed of GPT partition"...... is it possible that the OEM windows 8 was installed in a GPT partition?
1- How I can install windows 8 in GPT partition disk format? 2- How I can bypass this issue and install windows 8 Pro!
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
I am trying to setup a new Windows 8 computer that is going to be a gift. I need to go through the setup procedure so I can install some software which is also part of the gift. How can I do this without having to use a Microsoft account, or at least with leaving the least amount of account remnants for the new user?
two weeks ago I had a hard drive failure on the stated laptop. I installed an OCZ ssd and reinstalled windows 7 from a retail family pack. I used the Certificate of Authenticity (COA) windows key from the sticker on the HP laptop. This activated no problem. I purchased this laptop new at SAMS club.
I also upgraded two desktop computers to windows 8 that also had this family pack copy of windows 7 installed on them (about a year ago). Both of these computers activated with no problem. I also installed a separate windows media player upgrade on each computer.
I then upgraded the laptop to windows 8. I also upgraded it to windows media player. I noticed that the key provided during the upgrade was the same provided by Microsoft during the upgrade of one of the desktop computers.
The validation was successful at first.A day later I got a message stating that windows was not genuine. I then attempted to purchase another key and Microsoft stated that I could not purchase a key in my current country or region (I am in Wisconsin).
The website stated that I had to validate windows by purchasing a validation pack at a local retailer.
Why cant I validate windows? I have the COA still attached and nothing is different about the computer except the replaced hard drive.
My HP Pavilion is not letting me use any kind of virtualization software to run on Windows 8. It worked when I had Windows 7 running on this machine but now it won't work now on Windows 8.
I have tried updating my Windows 8.1 Pro (64-bit, upgraded from Windows 8 Pro) with the new "Update 1" (KB2919355) but it always fails with ERROR code 8007005 (or 80073712).
What I have tried do to fix:
Run WindowsUpdateDiagnostic (that e.g. removes files from C:WindowsSoftwareDistributionDownload and cleans Windows update history metadata info)DISM.exe /Online /Cleanup-image /ScanhealthDISM.exe /Online /Cleanup-image /RestorehealthDISM.EXE /online /cleanup-image /startcomponentcleanup
After all of this, still the update (KB2919355) fails
There must be something that Microsoft needs to fix, there are xxxxxxxxxxxx amount of similar complains and reports out there...
I decided to install Win 8.1 RTM x64 yesterday but what I expected to be a breeze turned into a nightmare. Installation fails, I am even unable to get into Safe Mode.
I was running Win 7 Ultimate x64 before without any issues whatsoever.
I already described my issues here, with errors and logs: Windows 8.1 RTM installation fails on Dell XPS 1340
Changed memory from 2x4GB to original 2x2GB but completely same issue
I have recently formatted my old windows. But now I am not able to install windows 8(actually even windows XP and seven) . When I try to boot from USB setup starts But 'Getting files ready' (which is second step of installation) stucks at midway like at 14% or 52% or 74% i.e. at any arbitary percentage and nothing happens . Actually I am able to move my cursor but installation no more proceeds further . I have tried to format many times and to run installation but everytime installation stuck at midaway without any error .
My laptop specs are : Acer aspire 5745 , 500GB HDD , 3GB RAM , intel core i3 processor
how many times i should reinstall windows or other os or how much time i can formate my pc? is this any harfull effect by installing windows many tmes( i did 30 times till today). some of my fren tell me there is certiain coating or layering in the harddisk which may break or run out with repeated format or reinstall....and drive will crash ..