Graphic Cards :: Apps To Auto Start At System Bootup
Sep 15, 2014
My Intel HD 4600 graphics puts 3 little apps to be started automatically. I know they are related to: intercepting hotkeys - hkcmd.exedisplaying tray icon - igfxtray.exedisplaying settings GUI - igfxpers.exe The thing is that I don't use hotkeys and have disabled them in Intel Graphics options, I've also removed Intel Graphics icon from the tray.
Thus, I'd expect the first two Intel apps to be removed from items set to auto-start at system bootup. However, they are still there. Is it correct? Shouldn't they be disabled when related functions are turned off?
Is it safe to simply delete the related registry entries and leave only the last app?
I have a laptop with one VGA port but I wanted to connect it to two extra monitors so that I could create a triple monitor system. I bought a VGA splitter to be able to connect all monitors but what I discovered is that it still recognizes it as a second monitor. I have the screen on my laptop extended with the second one but I cant extend the second one to the third one. It just duplicates it. Is there any way I can download software to make it recognize the third monitor?
I have a 2GB GeForce 640GT video card. It has 2GB onboard and windows 8 is using an additional 2GB of ram for it. I don't do gaming or heavy rendering. Occasionally I use google earth and a few other 3d mapping apps. I don't see how any of these need 4GB of ram to do this. This 2GB of system memory is 25% of my entire system memory. This card, in an older PC used no system memory under Windows 7.
How can I reclaim this ram? If I cannot, and add more ram will it take even more of that?
nVidia says this is a windows issue and not a driver issue but I cannot find anywhere in windows to tune or change this.
See the attached System Information from the nVidia control panel.
Today our Windows 8.1 system stopped and crashed when watching a video on the internet. The system was not able to restart and the screen has green lines. Please see some photo's. Once I got a message (of which I did not make a photo) about error video ftr or something like that. Cannot refresh installation since I have no Windows 8/Windows 8.1 dvd. It was a download from MS (image) and upgrade to Windows 8.1 When I start windows normally webcam light flashes and HD light flashes but screen remains black.
What steps to take? I cannot see the logfile since I cannot connect to the PC from my iMac anymore.
Uninstalled AMD software and drivers normally. Installed older or latest AMD software, and it is still there.I have completely uninstalled all AMD software using the AMD cleanup utility. I have installed the previous version 13.12, but the error still appears. Strangely this error was not there prior to installing 14.4, but now it is there using 13.12 even though the AMD cleanup utility was used.So nothing seems to clear this except to uninstall all AMD software using the cleanup utility.When no AMD software is installed there is no error (obviously!).
However, when subsequently installing any AMD graphics software the error returns.
Graphics Card Radeon HD 6450 AMD Catalyst Driver Version, and Driver History 14.4, previous 13.12, and all previous Catalyst software for many years. Operating System - Windows 8.1 Update 1 Pro 64-bit.
Today I instal win 8 pro on my alienware M17 R3, not clean instal just update since i buy the serial online from Microsoft store when installing win i keep all my setting and file and its look everything running great. after a few hours my laptop start to freeze especially after booting ( going to win 8 login ) and sometime freeze to when i play some game or doing my work ( adobe work ) when i check my system on device manager its show my graphic card ( amd radeon hd 6900M Series ) need to update driver or reinstall again, yes i do the work i download and reinstall the driver from much source and some from the AMD site too,, but the freeze and error still happens even the drivers already update on device manager
I have asus n550ja laptop with 8gb memory, the shared system memory is 1760mb, I usually don't play any games, there is no reason I can use that much graphic card memory. But because of the high shared memory, I cannot use all possible memory for virtual machine or ramdisk, when I use those, they can only maximum use about 6.5gb memory and cannot go higher. So I wonder is there a way I can reduce the intel graphic card shared system memory?
When i try to play a video from SBS On Demand or Tenplay I get the message the video failed to play retry and when i do retry that message appears again, note but i have tried those apps on nvidia cards and they work perfectly.
I didnt have this problem in windows 7 and it makes me want to go back to it sometimes because if this glitch.
windows 8 boots and after logging in,sometimes doesnt start programs that are set to load.
EFI installed with GPT
intel 2600 16gb memory nvidia 580gtx
2tb drive
I have fastboot disabled
programs that sometimes dont load
msi afterburner
logitech mouse software (without the software my g5 mouse is slow)
hp software
antivirus
rebooting the computer fixes the problem and all programs load.
This problem also happens on a fresh install after a couple of week and the event log is field with errors stating the service could of start, failed start, couldnt find service.
I ran chkdsk,sfc and all passed. And like I said rebooting the computer loads fine and event log for the reboot shows no errors.
My computer is hp envy dv6 7280sf notebook with 2 GPUs intel graphics HD 4000 and Nvidia Gefoce 630 M running windows 8 64x.
After making an free upgrade online for windows 8.1 which run successfully, both gpus were ok...
But after receiving a windows update with new drivers for intel graphics 4000 gpu , after install and restart , the computer freezes on blank black screen at windows startup with no mouse or anything only backlight.
So safemode was succeful but i figured that the update for windos update was the cause and graphics drivers were installed so i removed the drivers for intel graphics and itried to reboot the computer so the restart was succeful but the intel graphics card was unistalled and no drivers were automatically installed so i tried to download and install the drivers from hp and intel website for windows 8.1 however the install fails.
Automatic install from device manager failed both online and from computer and even from manual driver selection.
So therefore the install failed in safe mode , and the high def audio device ( on screen audio possibly) failed and the device was not recongnized (no drivers installed) so i'm stuck without anydrivers for the integrated gpu and the games are no longer able to run normally even if the nvidia card is on.
I tried downloading an installing Windows 8 drives but it failed to install also , for instance any new install of drovers seems to fail for me even for external usb hard drive.
I'm building a system for cryptocoin mining, and am having a little problem with getting Windows 8.1 (home, not pro) to run the 3rd card (GPU) My equipment is:
Here is the problem... everything boots just fine and runs with 2 of the GPU's installed. I have the latest AMD 13.12 drivers, and the AMD APP SKD installed. When I add the 3rd GPU though, windows will auto detect it as a Radeon 7900 with the caution sign, AND/OR a r9 200 series card, also with the caution sign, most times BOTH. Then it randomly freezes the system. A couple of times I got it to run long enough just by luck I guess, to install the 13.12 drivers on the 3rd GPU, but then in a few minuites the system would freeze again.
2 GPU's run just fine, the problem only shows up when the 3rd card is installed, and it happens on any of the 4 16x slots, or both 1x slots on the MOBO. It doesn't matter if the GPU's are directly on the MOBO, or on 1x16 risers. There are plenty of folks running this set up with up to 6 GPU's, so I know it can be done, but I must be missing something somewhere in the windows set up.
I've got a bit of a strange issue that I haven't had with previous OSes on this PC. I'm running a Dell OptiPlex 380 with Win 8 x64 at the office and I have to run 2 video cards for all of my screens. I have a GeForce 8400GS in the PCI-E slot and a GeForce 6200 in the PCI slot.
Previous to the Win 8 install, it worked fine. Booted exactly as I had shut it off. Now, with 8 - it's killing my PCI-E card presumably when it puts the screens to sleep when I leave for the day. So I'm coming in to all of my windows being moved to the PCI card's monitor (only one hooked to it) and I have to reboot to get PCI-E card to come back.
If I check the screen properties, I see only the screen hooked to the PCI card. I've changed the setting in the BIOS for the first video card to Auto and also tried the PCI-E selection and it's the same either way.
Why on earth would it default to the PCI card rather than the PCI-E card?
i am on windows 8.i am using HP laptop.this is my ccc version.
i got 2 problems:well first one is that i can't update to windows 8.1 as the update always hang on 82% and after that my laptop automatically shutsdown i don't know whats the reason is and that's why i am stuck at windows 8 till now although have 8.1 ISO but i don't want to install it as i have to erase my my windows 8 which came pres-installed so i will loose my genuine windows 8 .now i want to know what if i open the 8.1 installer and install it from a virtual tool like Deamon although it gives an option to keep files app setting safe but i fear that it would conflict with 8 and i would have to format my laptop then ok now to the major problem i just recently purchased Watch Dogs and installed it.I played the first mission and got busted so the mission failed and it began to reload and then a error pops up saying watch dogs have stopped working upon googling i found out that this is due to DUAl AMD Graphics so they stated that i should disable it but i cant find any option of disabling DUAL Graphics.
I have a bit of a problem here. I wanted to clone a 2tb sata disk from a karaoke machine, and when I inserted it into my NL54 HP server running windows 8 to perform the clone (to a new 2tb drive), the clone was successful. However, upon inserting the new disk in the karaoke machine, it just caused the karaoke machine to hang. Similarly inserting the original disk caused the same issue.
My question is, if Windows 8 alters or writes to (in any way) a new hard disk installed for the first time? I don't know the exact details of how the disk was previously formatted, however when I did install it in my HP server it auto showed up as a drive and files/folders were accessible - hence I assume it was NTFS.
What I really wanted to do was to do a clone whilst keeping the original write protected, however I don't think there was any pins on the sata disk to protect against this, so my options were limited anyway.
today i came home to my alienware x51 in some dell system recovery screen, i asked my kid what happened today she said the lights flickered several times, during a freak storm, So my pc must have tried to auto start several times, this is not good at all, i'm so lucky no damage was done at least so far. But how do i stop this behavior from happening again is there a setting i can turn off, so if we have another light flicker or loss of power that it never does it again. I just hope in the long run that my computer is not damaged who knows how many times it tried to reboot.
I have windows 8.1 ... Whenever i start my computer, firefox starts automatically. When I check under the startup tab of my task manager, i find that firefox is nested under rainmeter.exe along with bunch of other processes. How do I disable it?
Was playing with a Windows 8 machine today and noticed that it would scroll the start screen by having the mouse simply to the right side of the screen...without having to use the scroll bar at the bottom of the screen.
What enables that, is it a driver, is it built into Windows 8, etc? I've got some other laptops around running Windows 8 and with an external mouse attached, they aren't auto scrolling.
i'm running Windows 8 Home Premium.I'd like to increase my startup speeds, I already disabled as much as I can in Task Manager, msconfig, etc.In the Task Scheduler, it shows Metro Apps are taking CPU time at startup though. After much searching on the topic, I find very little about how to disable the Metro Apps from starting up. The main one I want to disable is "Mail, Calendar, People, and Messaging". I do not want to uninstall them, I just do not want them to do anything until I open them. It takes over 2 minutes of CPU time at startup for that one Metro App to fully load, and most of the time I never use it.
I have tried going into the Permissions of the App, and I disabled all of its Permissions to run in background of lock screen and everything. Still, it loads in Task Manager and takes CPU time.
I have used System Restore in Windows 7 to automatically create restore points, but not so in Windows 8 or 8.1. I configured TASKSCHD.MSC for a restore point to be created at 11 pm weekly, but not dice. I just changed the time to create a SR point daily at 7:15 AM to see if a SR point would be created. In Control Panel, there is not record of the SR point, but Task Scheduler says the 7:15 point was completed successfully. However, I can't find it in Control Panel.
I have a new Asus Laptop running 64 bit 8.1 Windows Operating System. It has a celeron processor @ 1.86 Ghz with 4GB of Ram.
The DVD/CD Drive will not auto start any discs, DVD or CD. I have set the auto start at "on" and in the control panel I have it checked to auto play all media. It still does not auto start when I insert a cd or dvd. I can however, manually see the files and play a music CD.
Last night I was playing League of Legends when I got a BSoD. I didn't think much of it, and just waited for my computer to restart. However, as it restarted, I saw that it was auto repairing and then diagnosing. After that it said auto repair failed, giving me the directory c:windowssystem32logfilessrtsrttrail.txt. I tried system refresh, which shoot me back system refresh failed straight away. The same happens with system restart, but it takes much longer for it to say the restart failed. I have no system restore points to choose from and I have no recovery disks as Windows 8 came preinstalled on the computer. I've troubledshooted for hours and come to opening SrtTrail.txt with the command prompt. It says:
Root cause found: The operating system version is incompatible with Startup Repair.
i play a browser game on chrome named begone nplay with my charger plugged in i get 100-130 fps but whenever i unplugged it it drops to like 20-40 fps . i checked power settings and its always on high performance .
I just decided to turn loose Windows 8 RP on "bare metal" here as opposed to a VM. I didn't even bother to mess with video under a VM, but with the bare metal install, I've run into some trouble.
At first, media player didn't seem to play anything, including .wmv files. Messing around, I unchecked the "Direct X acceleration" box and that allowed it to play .wmv files. However, it still won't play .mp4 files -- no video, just sound, and Media Player will hang trying to exit.
It did this with a clean install with only the Windows supplied video driver. My video card has been obsoleted by AMD now (HD 4200 chipset) and I couldn't use the new Windows 8 preview driver package, but I did try installing the AMD 12.4 driver in Win7 compatibility mode. That worked fine it seems, but it still won't play .mp4 files. Turning the Direct X acceleration back on still kills .wmv playback as well.
Win7, both x64 and 32-bit played .mp4 files fine right out of the box on this machine.
I have the following graphics card Gigabyte GeForce GTX 650 Ti Windforce 2X NVIDIA Graphics Card - 2GB installed on the system in my sig, what are the correct BIOS setting for the GPU, The options are: PCI Slot, PEG, PEG1, PEG2 and PEG3
I'm having issues with one of my GPU's fans (it features a dual-fan cooling) and will have to fix it soon. The problem is, it's making an annoying noise and I was thinking if I could just block it for the time being, however brutally that sounds.
So, the question is - provided the GPU doesn't reach critical temperatures (I'm going to monitor this obviously) - would this create any additional risks, like overcurrent or something? (I don't play games, but it's a HD6950, so it does emit a lot of heat).
I actually think it's integrated, how do I do it? According to running a random game on systemrequirementslab.com (Dead Island), my dedicated video RAM is 32mb. It's not a custom built, I bought it from the store.
Here are specs according to dxdiag: System Info: Operating System: Windows 8 64-bit (6.2, Build 9200) System Manufacturer: Dell Inc. System Model: Inspiron 5323 BIOS: A08 Processor: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (4 CPUs), ~1.8GHz Memory: 6144MB RAM Page file: 3252MB used, 5310MB available DirectX Version: DirectX 11
I am on my work computer, a DELL desktop with Windows 8.1, and I've been using a dual monitor setup for months, both with Windows 8 and 8.1. One monitor is connected via the VGA input, and the other is through a VGA to HDMI adapter. Again, they've been working flawlessly for months. It was a plug 'n play setup that took a minute and never had an issue.
I came in today and the second screen was blank. In the screen setup menu it recognized it and allowed me to adjust between extending, mirroring, etc. But after I unplugged it and plugged it back in, it no longer recognizes it. It simply cannot find a second monitor plugged in. Both screens work when plugged directly into the VGA port separately but not when plugged in the way they've worked for months.
