Graphic Cards :: Installed Win 8 Pro On Alienware M17 R3 Laptop Start To Freeze?
Jul 28, 2013
Today I instal win 8 pro on my alienware M17 R3, not clean instal just update since i buy the serial online from Microsoft store when installing win i keep all my setting and file and its look everything running great. after a few hours my laptop start to freeze especially after booting ( going to win 8 login ) and sometime freeze to when i play some game or doing my work ( adobe work ) when i check my system on device manager its show my graphic card ( amd radeon hd 6900M Series ) need to update driver or reinstall again, yes i do the work i download and reinstall the driver from much source and some from the AMD site too,, but the freeze and error still happens even the drivers already update on device manager
Today our Windows 8.1 system stopped and crashed when watching a video on the internet. The system was not able to restart and the screen has green lines. Please see some photo's. Once I got a message (of which I did not make a photo) about error video ftr or something like that. Cannot refresh installation since I have no Windows 8/Windows 8.1 dvd. It was a download from MS (image) and upgrade to Windows 8.1 When I start windows normally webcam light flashes and HD light flashes but screen remains black.
What steps to take? I cannot see the logfile since I cannot connect to the PC from my iMac anymore.
Uninstalled AMD software and drivers normally. Installed older or latest AMD software, and it is still there.I have completely uninstalled all AMD software using the AMD cleanup utility. I have installed the previous version 13.12, but the error still appears. Strangely this error was not there prior to installing 14.4, but now it is there using 13.12 even though the AMD cleanup utility was used.So nothing seems to clear this except to uninstall all AMD software using the cleanup utility.When no AMD software is installed there is no error (obviously!).
However, when subsequently installing any AMD graphics software the error returns.
Graphics Card Radeon HD 6450 AMD Catalyst Driver Version, and Driver History 14.4, previous 13.12, and all previous Catalyst software for many years. Operating System - Windows 8.1 Update 1 Pro 64-bit.
I have an Acer Aspire 8930G with Windows 8.1 x64 and Windows 7 x86 as a dual-boot. I use 8.1 as my everyday OS and only boot into 7 to play older games that only work with a 32-bit OS.
Ever since I installed Windows 8, I have not been able to adjust the brightness of my screen. Note that this problem started since I installed 8, not 8.1, and before I put on the copy of 7 as a dual-boot. When I use Fn+left/right (the brightness keys on my PC), the brightness slider appears on-screen and goes up and down, but the brightness of the panel doesn't actually change. Using the Charm doesn't work either, nor does adjusting it through the Control Panel.
I have tried fiddling with my Power Options in the Control Panel and disabling adaptive brightness. I have tried several different driver versions for my GPU, a GeForce 9600M GT. None of this has worked.
In Windows 7, however, the brightness controls work fine. If I want to adjust my brightness for 8.1, I have to boot into 7, change the brightness there, and then boot back into 8.1, where it will keep whatever brightness setting I was using in 7.
Is there some messed-up thing in the Registry? Is my GPU's firmware maybe just not compatible with Windows 8? I took a look at TechPowerUp's repository of GPU BIOSes, but it appears I already have the most recent one.
My Intel HD 4600 graphics puts 3 little apps to be started automatically. I know they are related to: intercepting hotkeys - hkcmd.exedisplaying tray icon - igfxtray.exedisplaying settings GUI - igfxpers.exe The thing is that I don't use hotkeys and have disabled them in Intel Graphics options, I've also removed Intel Graphics icon from the tray.
Thus, I'd expect the first two Intel apps to be removed from items set to auto-start at system bootup. However, they are still there. Is it correct? Shouldn't they be disabled when related functions are turned off?
Is it safe to simply delete the related registry entries and leave only the last app?
I have seen some posts on internet, concerning connecting an external CRT Monitor with a Laptop computer. They pretty much said that there might be a blue cable with, and one can use it to connect that monitor with laptop. Now I am confused that mine monitor has two cables; one of which is blue and the other one is white, having three larger pins inside. Both these wires are connected to my desktop CPU. Now my question is that, it is obvious that the blue wire can be connected to my laptop but what about the other one, this wire is connected to the power supply of my desktop pc, and when it comes to laptop, would mere one wire (blue) suffice for the electricity or other things?
I bought a new laptop without OS, it's a XMG advanced with i7 4700MQ CPU, an Intel HD grafics 4600 chip and an NVIDIA geforce 765M GTX.
I installed win 8.1 and updated all drivers. The laptop itself works fine. Now I wanted to connect an external Monitor ( HP w2207h) The laptop recognizes that there is an external Monitor and that it is an HP w2207h and tries to extend the desktop to it, but the monitor itself says that there is no input signal via the HDMI input and it goes to sleepmode.
When I connect my old Laptop to it, it is no Problem, the monitor shows the extendes Desktop, so the monitor an all cables are OK. (old Laptop : Win7 core 2 duo CPU geforce 9600M GT )
With the new Laptop I have the same problem, when I try to connect it to my LG TV set via HDMI, the Laptop recognizes the TV and tries to extend the desktop ( I can move the mouse out of the internal display to the TV ) but the TV says there is no input signal.
I have set the Output to 60 Hz and different resolutions and tried to duplicate the display or only use the external one. Nothing worked.
I can't force the Laptop to use the Gforce, he decides which one he wants to use.
A friend bought the same laptop and made the same installation, but when he connects to his external moniotr everything is fine, but I don't know what kind of monitor he has and I have not connected my laptop to his monitor.
I just purchased a acer V7-482PG-6662 ( Acer | Aspire V7 | V7-482PG-6662 | Overview ) and it comes with a 1080p display but the issue is that it wont go above 1366 x 768. This is right out of the box, i cant change to a higher resolution and all the drivers have been updated.
The Nvidia card works fine as it kicks in during gaming but even in games I cannot select a higher resoloution than 1366 x 768.
I even did a fresh install of windows 8 and windows 7 same issue. Device manager indicates "generic pnp display" under the monitor heading.
Others who have bought the laptop have not experienced this issue and their display is at 1080p.
EDIT: Tried a linux live usb and same issue, the resolution is only 1366 x 768, is this a hardware defect?
Recently I turned on my computer (Acer Aspire V5 122-P) and went to change the brightness. And using the FN keys and changing the brightness returns the same value rather than changing it. The other FN keys such as Volume +/- and turning adapters on and off still work. It is just the brightness keys. I would like a fix as I need long battery life and this is causing excessive battery drain. (I have tried turning it off and on again to no avail)...
My laptop (Acer Aspire E1-571) refuses to install the Intel VGA driver. I've tried via the Acer Live Updater and manually through the Acer and Intel website. I am assuming this is the cause of the fake dead pixels on my screen, the terrible quality of videos and the reason the screen freezes when playing any video game.
My new Acer laptop has very disappointing screen and video quality. The screen resolution is maxed-out at 1366 x 768 with Intel HD Graphics 4000. Those specs should be just fine for great visuals. My old desktop didn't come close to that but I could watch Youtube videos very well with no pixeling of image. Acer tech support said "new graphics driver download" and I did that , to no avail. Setting adjustments etc.? My wife's 3 year old Acer has better screen quality than my new one.
SONY is not providing windows 8 support for model VPCEB14EN.
where will get windows 8 drivers for graphics card ATI Mobility Radeon HD 5470. I checked AMD website but not found and also Bluetooth BROADCAM drivers are also missing.
Ok I have a Alienware M17XR2 laptop. I just installed windows 8.1 from a formatted start. Got most of the drivers functioning. I have an unknown device which I will address in another thread. Anyway my keyboard lags sometimes while I am typing fast. Never did that on my Windows 7. I'm running 64 bit as well.
My computer is hp envy dv6 7280sf notebook with 2 GPUs intel graphics HD 4000 and Nvidia Gefoce 630 M running windows 8 64x.
After making an free upgrade online for windows 8.1 which run successfully, both gpus were ok...
But after receiving a windows update with new drivers for intel graphics 4000 gpu , after install and restart , the computer freezes on blank black screen at windows startup with no mouse or anything only backlight.
So safemode was succeful but i figured that the update for windos update was the cause and graphics drivers were installed so i removed the drivers for intel graphics and itried to reboot the computer so the restart was succeful but the intel graphics card was unistalled and no drivers were automatically installed so i tried to download and install the drivers from hp and intel website for windows 8.1 however the install fails.
Automatic install from device manager failed both online and from computer and even from manual driver selection.
So therefore the install failed in safe mode , and the high def audio device ( on screen audio possibly) failed and the device was not recongnized (no drivers installed) so i'm stuck without anydrivers for the integrated gpu and the games are no longer able to run normally even if the nvidia card is on.
I tried downloading an installing Windows 8 drives but it failed to install also , for instance any new install of drovers seems to fail for me even for external usb hard drive.
I'm building a system for cryptocoin mining, and am having a little problem with getting Windows 8.1 (home, not pro) to run the 3rd card (GPU) My equipment is:
Here is the problem... everything boots just fine and runs with 2 of the GPU's installed. I have the latest AMD 13.12 drivers, and the AMD APP SKD installed. When I add the 3rd GPU though, windows will auto detect it as a Radeon 7900 with the caution sign, AND/OR a r9 200 series card, also with the caution sign, most times BOTH. Then it randomly freezes the system. A couple of times I got it to run long enough just by luck I guess, to install the 13.12 drivers on the 3rd GPU, but then in a few minuites the system would freeze again.
2 GPU's run just fine, the problem only shows up when the 3rd card is installed, and it happens on any of the 4 16x slots, or both 1x slots on the MOBO. It doesn't matter if the GPU's are directly on the MOBO, or on 1x16 risers. There are plenty of folks running this set up with up to 6 GPU's, so I know it can be done, but I must be missing something somewhere in the windows set up.
I've got a bit of a strange issue that I haven't had with previous OSes on this PC. I'm running a Dell OptiPlex 380 with Win 8 x64 at the office and I have to run 2 video cards for all of my screens. I have a GeForce 8400GS in the PCI-E slot and a GeForce 6200 in the PCI slot.
Previous to the Win 8 install, it worked fine. Booted exactly as I had shut it off. Now, with 8 - it's killing my PCI-E card presumably when it puts the screens to sleep when I leave for the day. So I'm coming in to all of my windows being moved to the PCI card's monitor (only one hooked to it) and I have to reboot to get PCI-E card to come back.
If I check the screen properties, I see only the screen hooked to the PCI card. I've changed the setting in the BIOS for the first video card to Auto and also tried the PCI-E selection and it's the same either way.
Why on earth would it default to the PCI card rather than the PCI-E card?
i am on windows 8.i am using HP laptop.this is my ccc version.
i got 2 problems:well first one is that i can't update to windows 8.1 as the update always hang on 82% and after that my laptop automatically shutsdown i don't know whats the reason is and that's why i am stuck at windows 8 till now although have 8.1 ISO but i don't want to install it as i have to erase my my windows 8 which came pres-installed so i will loose my genuine windows 8 .now i want to know what if i open the 8.1 installer and install it from a virtual tool like Deamon although it gives an option to keep files app setting safe but i fear that it would conflict with 8 and i would have to format my laptop then ok now to the major problem i just recently purchased Watch Dogs and installed it.I played the first mission and got busted so the mission failed and it began to reload and then a error pops up saying watch dogs have stopped working upon googling i found out that this is due to DUAl AMD Graphics so they stated that i should disable it but i cant find any option of disabling DUAL Graphics.
I have been having a problem lately with my dell laptop. It suddenly freezes and goes really slow. I think there might be some files corrupted or something. I have run superantispyware, and malwarebytes. Superantispyware only found cookies. I dont have to set back to factory settings. My laptop is a dell inspiron 15. I am still trying to get used to windows 8.1 Here is the info
System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 8.1, 64 bit Processor: Intel(R) Core(TM) i3-3227U CPU @ 1.90GHz, Intel64 Family 6 Model 58 Stepping 9 Processor Count: 4 RAM: 6013 Mb Graphics Card: Intel(R) HD Graphics 4000, -1984 Mb Hard Drives: C: Total - 463460 MB, Free - 399321 MB; Motherboard: Dell Inc., 033MX4 Antivirus: Windows Defender, Disabled
i play a browser game on chrome named begone nplay with my charger plugged in i get 100-130 fps but whenever i unplugged it it drops to like 20-40 fps . i checked power settings and its always on high performance .
I installed Windows 8 x32 on my laptop. It has 3 GB RAM and the processor is x64-based. I don't use my laptop for much other than e-mail, Facebook, YouTube. Here are my questions:
Is there any point to switch from x32 to x64?
Is there any down side? I read somewhere that I won't be able to run 16-bit applications (I don't even know if they still exist)?
Do I need to do a clean install, or can I use the Upgrade install option rather than the Custom (advanced) install option?
Always keep a list of disabled services as you disable them! I spent a dramatic amount of time referencing 2-3 resources for each service I disabled and have had no issues up until now. I disabled a few in a row without restarting and managed to forget which they were. this has caused two issues If I can't/don't - the end result will be me having to reset them all to default, go through them one by one again - AND STILL not know which was the one(s) that caused my problem(s) which will risk the same thing happening again.
1) I set an account picture to my Microsoft.net account for windows 8.1x64 (the one that pops up when you turn on your PC and have to enter your password right after the lock screen but before windows) and after a restart, it disappears and goes back to the default grey square with a white outline of an avatar)
2) all my installed programs disappeared on the start screen! It's literally blank. I didn't have much due to it being a fairly new install but they all disappeared including PC settings and metro store (the two metro apps I had left). I checked if the apps still worked (mumble for example because it also disappeared) and they did, but if you go under program data/start menu/programs etc, all the folders with the app shortcuts in them are gone!
I tried to reinstall mumble; and it reinstalled fine, but still NO folder w shortcut being placed in the start menu therefore nothing being put on the start/apps screen. What on earth could be doing this service wise?
I just decided to turn loose Windows 8 RP on "bare metal" here as opposed to a VM. I didn't even bother to mess with video under a VM, but with the bare metal install, I've run into some trouble.
At first, media player didn't seem to play anything, including .wmv files. Messing around, I unchecked the "Direct X acceleration" box and that allowed it to play .wmv files. However, it still won't play .mp4 files -- no video, just sound, and Media Player will hang trying to exit.
It did this with a clean install with only the Windows supplied video driver. My video card has been obsoleted by AMD now (HD 4200 chipset) and I couldn't use the new Windows 8 preview driver package, but I did try installing the AMD 12.4 driver in Win7 compatibility mode. That worked fine it seems, but it still won't play .mp4 files. Turning the Direct X acceleration back on still kills .wmv playback as well.
Win7, both x64 and 32-bit played .mp4 files fine right out of the box on this machine.
I have the following graphics card Gigabyte GeForce GTX 650 Ti Windforce 2X NVIDIA Graphics Card - 2GB installed on the system in my sig, what are the correct BIOS setting for the GPU, The options are: PCI Slot, PEG, PEG1, PEG2 and PEG3
I'm having issues with one of my GPU's fans (it features a dual-fan cooling) and will have to fix it soon. The problem is, it's making an annoying noise and I was thinking if I could just block it for the time being, however brutally that sounds.
So, the question is - provided the GPU doesn't reach critical temperatures (I'm going to monitor this obviously) - would this create any additional risks, like overcurrent or something? (I don't play games, but it's a HD6950, so it does emit a lot of heat).
I actually think it's integrated, how do I do it? According to running a random game on systemrequirementslab.com (Dead Island), my dedicated video RAM is 32mb. It's not a custom built, I bought it from the store.
Here are specs according to dxdiag: System Info: Operating System: Windows 8 64-bit (6.2, Build 9200) System Manufacturer: Dell Inc. System Model: Inspiron 5323 BIOS: A08 Processor: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (4 CPUs), ~1.8GHz Memory: 6144MB RAM Page file: 3252MB used, 5310MB available DirectX Version: DirectX 11
I am on my work computer, a DELL desktop with Windows 8.1, and I've been using a dual monitor setup for months, both with Windows 8 and 8.1. One monitor is connected via the VGA input, and the other is through a VGA to HDMI adapter. Again, they've been working flawlessly for months. It was a plug 'n play setup that took a minute and never had an issue.
I came in today and the second screen was blank. In the screen setup menu it recognized it and allowed me to adjust between extending, mirroring, etc. But after I unplugged it and plugged it back in, it no longer recognizes it. It simply cannot find a second monitor plugged in. Both screens work when plugged directly into the VGA port separately but not when plugged in the way they've worked for months.
I just purchased a new windows 8 PC. I was attempting to hook the computer up to my tv through hdmi (the pc has no VGA input) and when I went through the normal paces to put the display on my tv (display desktop only on 2), the signal did not transfer and there is no display on either my tv or pc! how to revert the display back to my pc monitor without being able to see anything? Acer support was less than useful. It's an acer aspire z3-605 all-in-one pc.
