I have 64MB for video memory reported in BIOS but my Adapter shows only 32MB, it's normal and I am looking at two different things or something isn't right, I have the latest Intel HD4000 drivers installed.
View 9 RepliesThere is an option in my bios to change the dedicated video memory of my integrated graphics card.Is there any problem if I increase it?(Currently it is 64 MB, there is maximum 1024 MB available in the option).
See specs below.....
I got a new video card, namely the Sapphire Vapor-X R9 280X to replace my old (broken) video card, namely the Sapphire Radeon HD 7970 Boost.
The problem is that I get no video signal when linking my new video card. The vga-led on motherboard turns on red (normally never) .
I thought my motherboard is broken, but then I tried the video card (Radeon HD 6950) from my brother and he just shows video signal. (vga-led turns not on red this time on motherboard) .
I would also say that on the box of my new video card is a 750 watt power supply recommended, but I only have a 600 watt power supply build in my pc.
I'm building a system for cryptocoin mining, and am having a little problem with getting Windows 8.1 (home, not pro) to run the 3rd card (GPU) My equipment is:
Gigabyte 990 FXA UD3 MOBO
AMD Vishera CPU
2x4 gig Corsair Ram
3x Sapphire r9 280x Video cards
1000w Corsair PSU
Scandisk SSD
All parts are brand new.
Here is the problem... everything boots just fine and runs with 2 of the GPU's installed. I have the latest AMD 13.12 drivers, and the AMD APP SKD installed. When I add the 3rd GPU though, windows will auto detect it as a Radeon 7900 with the caution sign, AND/OR a r9 200 series card, also with the caution sign, most times BOTH. Then it randomly freezes the system. A couple of times I got it to run long enough just by luck I guess, to install the 13.12 drivers on the 3rd GPU, but then in a few minuites the system would freeze again.
2 GPU's run just fine, the problem only shows up when the 3rd card is installed, and it happens on any of the 4 16x slots, or both 1x slots on the MOBO. It doesn't matter if the GPU's are directly on the MOBO, or on 1x16 risers. There are plenty of folks running this set up with up to 6 GPU's, so I know it can be done, but I must be missing something somewhere in the windows set up.
I've got a bit of a strange issue that I haven't had with previous OSes on this PC. I'm running a Dell OptiPlex 380 with Win 8 x64 at the office and I have to run 2 video cards for all of my screens. I have a GeForce 8400GS in the PCI-E slot and a GeForce 6200 in the PCI slot.
Previous to the Win 8 install, it worked fine. Booted exactly as I had shut it off. Now, with 8 - it's killing my PCI-E card presumably when it puts the screens to sleep when I leave for the day. So I'm coming in to all of my windows being moved to the PCI card's monitor (only one hooked to it) and I have to reboot to get PCI-E card to come back.
If I check the screen properties, I see only the screen hooked to the PCI card. I've changed the setting in the BIOS for the first video card to Auto and also tried the PCI-E selection and it's the same either way.
Why on earth would it default to the PCI card rather than the PCI-E card?
I have asus n550ja laptop with 8gb memory, the shared system memory is 1760mb, I usually don't play any games, there is no reason I can use that much graphic card memory. But because of the high shared memory, I cannot use all possible memory for virtual machine or ramdisk, when I use those, they can only maximum use about 6.5gb memory and cannot go higher. So I wonder is there a way I can reduce the intel graphic card shared system memory?
View 4 Replies View RelatedI actually think it's integrated, how do I do it? According to running a random game on systemrequirementslab.com (Dead Island), my dedicated video RAM is 32mb. It's not a custom built, I bought it from the store.
Here are specs according to dxdiag:
System Info:
Operating System: Windows 8 64-bit (6.2, Build 9200)
System Manufacturer: Dell Inc.
System Model: Inspiron 5323
BIOS: A08
Processor: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (4 CPUs), ~1.8GHz
Memory: 6144MB RAM
Page file: 3252MB used, 5310MB available
DirectX Version: DirectX 11
[Code] .....
I downloaded a demo for a game a couple days ago and all I get is audio, my video drivers are up to date. The developers said they were using a program called Unity 3D. I will list my specs below.
HP ENVY X2 running Windows 8
Processor: Intel(R) Atom(TM) CPU Z2760 @ 1.80Ghz 1.80 GHz
Memory: 2.00GB
System Type: 32-bit Operating System, x86 based processor
Graphics Card: Intel(R) Graphics Media Accelerator
Running win 8 and installed Windows 8.1 and device manager told me windows shut down my video card (560 Ti) because of a problem and began running default drivers. I tried everything from removing and reinstalling drivers, reseating the video card, changing slots, etc....
As soon as I reverted back to Windows 8, EVERYTHING ran as fine as before.
SPECS:
AMD FX-9370
32gb G skill
ASUS M5A99X EVO
Windows 8
Today our Windows 8.1 system stopped and crashed when watching a video on the internet. The system was not able to restart and the screen has green lines. Please see some photo's. Once I got a message (of which I did not make a photo) about error video ftr or something like that. Cannot refresh installation since I have no Windows 8/Windows 8.1 dvd. It was a download from MS (image) and upgrade to Windows 8.1 When I start windows normally webcam light flashes and HD light flashes but screen remains black.
What steps to take? I cannot see the logfile since I cannot connect to the PC from my iMac anymore.
I upgraded my Desktop which uses Vista to Windows 8. I tried opening a video the other day but my Video card driver is out of date. What should I do.
View 6 Replies View RelatedAfter certain update of my graphics card driver I no longer have a video playback on my video players (including WMP), besides VLC. All the other video player are just able to play the sound of the video file, Nut not the video (the screen just stays black).The thing is that I didn't have this problem previously,, all my video players were able to play all the same video files, which they can't now!
I have the latest AMD Radeon HD video drivers installed. As I mentioned I didn't have this problem before,, with a previous versions of the AMD graphics card driver. This happened to my laptop a while ago already,, Since I have this problem I updated my video drivers 5 or 6 times at least, and no change so far !!!
As I mentioned I have the problem for some time already, during this time I re-installed my Windows couple of times, plus I even changed the version of the windows (7 to 8), for the moment I have the last version of video driver installed, I haven't installed ANY codecs.
I can probably find out from which update of a graphic card driver it started to happen and install the previous version, but I don't wanna miss out on the benefits of the driver updates, since I can still play normally videos on VLC (Only! cuz its probably have integrated codecs?!)
All the other graphic card related tasks are perfectly normal, I play games and so on.
I'm not sure if this problem is with the GPU, but I think it might be a good place to start.
Up until recently, I was running Windows 8.1 on a custom build with the following: Athlon II X4 610E processor, Silverstone NT01-E cooler, MSI 890-GX MoBo, 4GB OCZ DDR3/1333 RAM, Zotac GeForce GT 240 GPU, AuzenTech X-Fi Home Theater Sound Card, Western Digital 2TB Caviar Green, Corsair GT 120 SSD, Samsung SH-B083 ODD, and Silverstone NightJar ST40F PSU.
With this build I noticed that there was a certain tendency for the screen to "flicker" when the video changed (ie, starting a Netflix video, a Hulu video, movie on WMC, etc). It generally occurs at the start of a video and it's conclusion, being most annoying on Hulu because it does this at the start of a segment, just before the commercial break, and during the commercials.
Since I'm transitioning to gaming on my PC, I replaced several components, upgrading to a EVGA GeForce GTX 770 DUAL SuperClocked GPU, Intel Core i5-4570 processor (stock cooler), CORSAIR Vengeance LP 16GB (2 x 8GB) RAM, ASUS Q87M-E LGA 1150 MoBo, and CORSAIR CX series CX600 600W PSU. I also reinstalled Windows 8.1.
I had hoped that this would clear up my issue as a side benefit, but that is not the case. In fact, in some instances it's frequency has increased, mostly only occurring at the times I've come to expect, but I was watching a Hulu video just a few minutes ago and the number of times the screen flickered was nearly unbearable.
My new Acer laptop has very disappointing screen and video quality. The screen resolution is maxed-out at 1366 x 768 with Intel HD Graphics 4000. Those specs should be just fine for great visuals. My old desktop didn't come close to that but I could watch Youtube videos very well with no pixeling of image. Acer tech support said "new graphics driver download" and I did that , to no avail. Setting adjustments etc.? My wife's 3 year old Acer has better screen quality than my new one.
View 9 Replies View RelatedMy system is a Windows 8 x64 Pro with Boot Camp 5 running on a 2011 Macbook Pro. I'm experiencing Windows crashes and distorted screen images with artifacts (see attachment #1) almost every time I start programs that require heavy video-processing (e.g.: games). The problem also happens, even if rarely, at random without doing anything particular.
This is what is shown in the debug trace of MEMORY.DMP:
Code: Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64Copyright (c) Microsoft Corporation. All rights reserved.Loading Dump File [C:WindowsMEMORY.DMP]Kernel Bitmap Dump File: Only kernel address space is availableSymbol search path is: srv*f:symbolswebsymbols
[Code] ....
As you see, it really looks like a video card problem related to atikmpag.sys. I think in cases like this the first thing to try is updating the drivers but unfortunately, since I'm running Windows on Boot Camp, it looks like there aren't suitable drivers apart from the ones I'm already using. I tried to install the ATI CCC 12.8 beta 2 (that is the only thing that I can run) that seem to suit my system, but that didn't work.
I have been suggested to look into the power settings of the video card (because they may lead to system instability), and specifically I tried playing a bit with the AMD PowerPlay - Technology in the CCC. Anyway, when I open the tab, the lists show up as blank and there is really no option I can work on (see attachment #2). It looks like my video card doesn't support this feature, even if I think it definitely should like it says in the AMD page: AMD PowerPlay.
I have a very serious issue with my brand new Lenovo IdeaPad Y500 GT 650M SLI system (specs at the bottom) . I can't play games at all because my system will lock up as soon as I enter the game, requiring a hard reset. My Windows Action Center is filled with Video Hardware Error reports. Is this because of a bad video card or is it a driver/software issue? I am on a clean install of Windows 8 Pro and have already tried the 314.22 WHQL and 320.00 BETA drivers. Nothing is overclocked.
View 4 Replies View RelatedMy computer is hp envy dv6 7280sf notebook with 2 GPUs intel graphics HD 4000 and Nvidia Gefoce 630 M running windows 8 64x.
After making an free upgrade online for windows 8.1 which run successfully, both gpus were ok...
But after receiving a windows update with new drivers for intel graphics 4000 gpu , after install and restart , the computer freezes on blank black screen at windows startup with no mouse or anything only backlight.
So safemode was succeful but i figured that the update for windos update was the cause and graphics drivers were installed so i removed the drivers for intel graphics and itried to reboot the computer so the restart was succeful but the intel graphics card was unistalled and no drivers were automatically installed so i tried to download and install the drivers from hp and intel website for windows 8.1 however the install fails.
Automatic install from device manager failed both online and from computer and even from manual driver selection.
So therefore the install failed in safe mode , and the high def audio device ( on screen audio possibly) failed and the device was not recongnized (no drivers installed) so i'm stuck without anydrivers for the integrated gpu and the games are no longer able to run normally even if the nvidia card is on.
I tried downloading an installing Windows 8 drives but it failed to install also , for instance any new install of drovers seems to fail for me even for external usb hard drive.
i am on windows 8.i am using HP laptop.this is my ccc version.
i got 2 problems:well first one is that i can't update to windows 8.1 as the update always hang on 82% and after that my laptop
automatically shutsdown i don't know whats the reason is and that's why i am stuck at windows 8 till now although have 8.1 ISO but i don't want to install it as i have to erase my my windows 8 which came pres-installed so i will loose my genuine windows 8 .now i want to know what if i open the 8.1 installer and install it from a virtual tool like Deamon although it gives an option to keep files app setting safe but i fear that it would conflict with 8 and i would have to format my laptop then ok now to the major problem i just recently purchased Watch Dogs and installed it.I played the first mission and got busted so the mission failed and it began to reload and then a error pops up saying watch dogs have stopped working upon googling i found out that this is due to DUAl AMD Graphics so they stated that i should disable it but i cant find any option of disabling DUAL Graphics.
I've seen in a few forum posts that you can change the value of this registry entry:
HKCUSoftwareMicrosoftWindowsCurrentVersionAppletsSysTrayServices
to various values to add or remove items that will trigger the Safely Remove Hardware icon from the Systray of the Taskbar. The default value is
REG_DWORD 0x1f
what the valid values are and what they control.
For instance, setting it to 27 (0x1b) remove the sound volume control icon.
graphic card : GT 740m
i play a browser game on chrome named begone nplay with my charger plugged in i get 100-130 fps but whenever i unplugged it it drops to like 20-40 fps . i checked power settings and its always on high performance .
how can i know GPU activity ?
i like a lot process hacker , i have the last version and under Windows 8.1 pro 64bit ,system information gpu is empty (there is always 0% activity
is there a program that let me monitor?
I just decided to turn loose Windows 8 RP on "bare metal" here as opposed to a VM. I didn't even bother to mess with video under a VM, but with the bare metal install, I've run into some trouble.
At first, media player didn't seem to play anything, including .wmv files. Messing around, I unchecked the "Direct X acceleration" box and that allowed it to play .wmv files. However, it still won't play .mp4 files -- no video, just sound, and Media Player will hang trying to exit.
It did this with a clean install with only the Windows supplied video driver. My video card has been obsoleted by AMD now (HD 4200 chipset) and I couldn't use the new Windows 8 preview driver package, but I did try installing the AMD 12.4 driver in Win7 compatibility mode. That worked fine it seems, but it still won't play .mp4 files. Turning the Direct X acceleration back on still kills .wmv playback as well.
Win7, both x64 and 32-bit played .mp4 files fine right out of the box on this machine.
I've tried to set up a dual monitor for Windows 8.
This is what happens:
Note: If i set it as the tv for the main screen it works fine?
I have the following graphics card Gigabyte GeForce GTX 650 Ti Windforce 2X NVIDIA Graphics Card - 2GB installed on the system in my sig, what are the correct BIOS setting for the GPU, The options are: PCI Slot, PEG, PEG1, PEG2 and PEG3
View 7 Replies View RelatedI'm having issues with one of my GPU's fans (it features a dual-fan cooling) and will have to fix it soon. The problem is, it's making an annoying noise and I was thinking if I could just block it for the time being, however brutally that sounds.
So, the question is - provided the GPU doesn't reach critical temperatures (I'm going to monitor this obviously) - would this create any additional risks, like overcurrent or something? (I don't play games, but it's a HD6950, so it does emit a lot of heat).
I am on my work computer, a DELL desktop with Windows 8.1, and I've been using a dual monitor setup for months, both with Windows 8 and 8.1. One monitor is connected via the VGA input, and the other is through a VGA to HDMI adapter. Again, they've been working flawlessly for months. It was a plug 'n play setup that took a minute and never had an issue.
I came in today and the second screen was blank. In the screen setup menu it recognized it and allowed me to adjust between extending, mirroring, etc. But after I unplugged it and plugged it back in, it no longer recognizes it. It simply cannot find a second monitor plugged in. Both screens work when plugged directly into the VGA port separately but not when plugged in the way they've worked for months.
How do I get "Screen Resolution" (on desktop, right click and select Screen Resolution) to show my main monitor as "1"?
View 5 Replies View RelatedI just purchased a new windows 8 PC. I was attempting to hook the computer up to my tv through hdmi (the pc has no VGA input) and when I went through the normal paces to put the display on my tv (display desktop only on 2), the signal did not transfer and there is no display on either my tv or pc! how to revert the display back to my pc monitor without being able to see anything? Acer support was less than useful. It's an acer aspire z3-605 all-in-one pc.
View 5 Replies View RelatedI've noticed that whenever I unplug my charger my brightness dims down to a point where I know its on, but I can't use it. Usually I have to put my computer to sleep and turn it back on to get it to fix. Also, the brightness wont adjust in anyway when its on. I've tried the function keys and the setting in the side bar. I have a toshiba laptop running windows 8.1 . I also have recently completely wiped it thinking it was a virus of some sorta with no change.
View 1 Replies View RelatedMy Sapphire AMD HD 7870 just bit the dust so it has been sent back with an RMA. I had hoped to replace it with an ASUS AMD HD 3850 but Windows 8.1 will not work with it. There is an error message on a blue screen something about a header (I don't have the exact error message today).
I suspected it was a driver problem so uninstalled the existing driver and tried to install the latest AMD one. I can uninstall OK but as soon as I reboot the Microsoft driver installs itself giving me no opportunity to install the AMD one.
Today, I got a new graphics card for my computer that is about 5 years old. Here are my specs:
Dell Inspiron 530
Intel Core 2 Duo e2500 2.33 GHz Processor
NEW GPU: MSI Geforce GT 440 (N440GT)
OLD GPU: NVIDIA Geforce 8600GT
3GB ram
300 watt power supply (unsure of 12V ratings)
Windoes 8 Pro 64bit
I installed my GT440 into my computer today, and the card worked fine when there was no drivers installed. I uninstalled my older drivers from my 8600 and installed drivers for the 440. When I restarted, I got the BSOD with an error message saying VIDEO_DTR_FALIURE. What does this message mean, and what can I do to fix this BSOD problem? This didnt happen on my old card, but it does on my new card? Is there a problem with my power supply, or is it an issue with the drivers?