When my XPS 8500 sleeps only the screen dims but I can still hear the hard drive spinning. I set it to sleep in the power options area for 5 minutes but only the monitor shuts off. If I click on sleep in the settings area it spins all the way down.
View 3 RepliesI power up the PC and monitor, i can see the POST on the monitor, and the windows 8 loading, then my monitor starts to shut down for 1-2 seconds, its not a complete shut down, like you change resolution or refresh rate, then after 1-2 seconds i can use my PC normally.
I uninstalled my nvidia drivers, and i don't have anymore this problem....
I booted windows 8 in safe mode, and i don't have the problem....
My gpu is a gtx680 and a XL2411T monitor, with dual link DVI cable...
I have here a Dell XPS 18 tablet, which is some kind of all in one pc and tablet (18''). It can be used as stand-alone tablet as well as attached on a powered stand with keyboard/mouse.
Now I wanted to use it with a projector or second screen, which is a bit annoying. Following scenarios have been tried out already:
Connected with a lenovo USB 3.0 dock/port replicator 0A33970, works fine with the software included. However, I do not want to carry the dock with me, it is bulky and needs power connected with a Lenovo USB-to-DVI Monitor Adapter. A nice, small and lightweight adapter. But, that one does not work, even with software installed.
It is proven that it works, but not with the device I wanted Is there a hidden function/system adjustment that I needed to know?
I have a Toshiba Tekbright Monitor that was working very well in my old computer. I bought a Dell XPS 920 I7 12G RAM 2T with a Windows 8.1, the incorporated speakers are not detected, even after I updated the Nvidia drivers.
If I plug headers, I have sound.
If I restart and press F1, the audio test there gives me sound too.
So the monitor is fine, just some conflict between speakers and Windows/Nvidia.
I have a new Dell XPS with Windows 8. I was just starting to use it when I tried to explore bringing up a second monitor. For some reason the system doesn't recognize the second monitor. I then accidentally selected "second monitor only".
now I am without any monitor. When the system boots it recognizes the primary monitor (DVI) but then goes off to look for the second monitor. My system has AMD DVi video card as the primary video. The other video port is VGA, but I cannot get any monitor I have to work from it.
Is there a way to reset the video selection without having to use the mouse to navigate to the Devices selection?
Strange problem I am having with my windows 8.
I have an ASUS laptop running 8.0 which I am running with a second screen (dell monitor) connected via VGA. I have it set so the external monitor is the primary screen and the laptop is the secondary screen. It is set for a taskbar on each display, with the primary taskbar containing the shortcuts on the monitor, so when I click them they open there. It's been working fine for months.
So I switched it on today and my taskbar shortcuts have jumped to the taskbar on the second (laptop) screen, however my external display is still set as the primary and still has my desktop icons, trashcan etc but a blank taskbar (like the one that used to be on the secondary display)! When I click the shortcuts which are now on the taskbar of the laptop screen they open on the monitor. (ie the wrong screen) I disconnected the monitor, turned off the extended desktop and set it to just use the laptop screen. All my desktop icons moved to the laptop screen but the taskbar shortcuts vanished and I was left with a blank taskbar. If I plug the monitor in again and extend the desktop they reappear, but on the wrong screen. Even if I reboot without the external screen connected I get no shortcuts until I plug in the monitor and set it to extend the desktop. I have checked all the taskbar settings and they are all correct.
I have my options to turn off monitor after 10 minutes and put pc to sleep after 45 minutes. None of these work, I have run the command to see why and it says nothing that is preventing my pc from going to sleep
View 4 Replies View RelatedThe last days my laptop is not going to sleep when I close the lid; nothing happens. When I open the lid everything is still running.
I already tried a couple of things. I restored the laptop 5 days back, but no result. Also I closed the lid feature has sleep selected for both battery and plugged in.
When I return to my computer after it has been asleep for a while I cannot get it to restart. I have to turn the power off and then back on in order to reboot the computer.
View 6 Replies View RelatedI have Windows 8 and Windows 7 installed in my desktop PC and it goes into "hibernation" after a few minutes sleep. I quoted "hibernates" because I'm not sure this is truly Hibernation, perhaps it's some special Asrock hibernation or something.
After about 20 minutes sleep, the PC starts and then shuts off by itself, but when I turn it on again, you get a black screen first (nothing else, no "resuming from hibernation", nothing) and after a minute or so all appears as you left it before putting it to sleep, as if it had resumed from hibernation.
It happens with both Windows 7 and Windows 8. I'd rather it didn't go into hibernation, but remain in sleep mode.
I've tried all options in Power Options > Change Advanced power settings, so I'm sure it's not related to power options.
I think this has to do with UEFI settings or it's some Asrock feature, but I don't which, I've tried some.
I've already disabled and deleted hyberfil.sys
Motherboard: Asrock Z77 Pro3
Processor: Intel Core i5 3450
My pc will crash at random times sometimes just when surfing the internet and others when waking it from sleep it will show a BSOD. Almost every time this happens I get a message that says "your pc has recovered the video drivers" I have tried updating drivers and re-installing them and I still get this. Sometimes the pc will go for 2 weeks with out an error other times it is every 1-2 days. I have Attached the Diagnostics information from the tool. I do not know if the issues are related of not.
View 2 Replies View RelatedWhen i start a game, usually wow or league, the game doesnt start. The process stays active and I cant shut it off and a couple of minutes later I get the BSOD with the message driver_power_driver_failure. This can also happen when I
View 1 Replies View RelatedI have an Asus UX31A with WIndows 8 Enterprise VL. Every time I wake the system from sleep, I hear the system chime as if a device is attached, unattached, and re-attached. I don't know what as it happens at the login screen and I'm not fast enough to see if anything appears in the taskbar.
After logging in, I get this window (see below; I had to remove a couple things I don't know if I can show). If I follow its directions, I restart and go about life until I put the system to sleep again in which the process repeats. As I write this I'm finishing a bunch of updates so perhaps that has something to do with it (I have a lot of Office and SP1 for SQL Server that I've been putting off along with a healthy swath of optional OS updates).
Today I plugged an hdmi to vga cable into my Win 8 sony vaio, and I plugged the other VGA side of the cable into an acee 22" monitor. I then chose from the right hand windows 8 panel to "extend to monitor", the laptop screen went black, the monitor screen remained without signal (extended screen did not show on monitor) and now the laptop screen is black.
I am now stuck and both laptop and monitor screen not working.
I tried unplugging cable, pressing fn and all the f1 to f12, shift, windows button but nothing is working.
I pressed off button then switched laptop back on and it showed the sony vaio logo on laptop then the screen went black again.
how could I return my laptop screen to work and stop the screen extension which is not working and which I am sure is the case.
Any buttons on keyboard to click at all?
My first build and am having problems with windows booting extremely slow, running buggy and shutting down on me randomly. It typically shuts down during strenuous tasks such as gaming and installation, but has shut down in the UEFI bios, once. When I boot back up I almost always get to the sign in menu but after putting in my password it takes a good 3-5 minutes before the start menu pops up. Sometimes it'll load up to a black screen where I can only use the mouse pointer, and access the task manager. Wondering if it's my motherboard or if it's just a driver problem. Running an ASUS M5A97 LE R2.0 with an AMD 8350 black and an Sapphire 7870 XT with two sticks of cheap 4 GB 1333 MHz ram.
View 4 Replies View RelatedI bought an ASUS N56VJ laptop in February of this year, 2013. It has suddenly shut down six or seven times. This happens very randomly and with no pattern that I can see. It's not an overheating issue as I'm monitoring the temperature with ReatTempGT (and it often happens after only being on for a few minutes). I managed to find an error when I checked the event viewer that was from approximately the time that it happened. I'll post the information below.
[ Name] Log Name: System
Source: Microsoft-Windows-Wininit
Date: 3/7/2013 4:12:59 PM
Event ID: 11
[Code]....
My system shuts off automatically sometimes when the power goes with UPS on. UPS is not giving any beeps or warning signs though. At this time UPS seems On though. But my computer shuts off as if I unplugged its power cable. My UPS battery is new and UPS is 6 years old.
View 9 Replies View RelatedMY laptop starts up to start menu then I get tons of pop up saying windows system 32 cmd exe ? I CANT CONTROL LAPTOP AT ALL ! Then it crashes, I need computer for work n school and it's a new Dell so disappointing .
View 4 Replies View RelatedIs there a fix for Windows 8 shutting down automatically after about an hour?
View 8 Replies View RelatedGot a custom build server - Gigabyte H87M-D3H, i5-4570, 16GB RAM. It's now running 2012 R2, but it was running 2012 initially and had exactly the same problems, which suggests hardware issues.
Nearly every night, during the night sometime, the server crashes off, and needs to be started again with the power button.
I first suspected a power issue because nothing shows in the event log.But after connecting it to a UPS and replacing the power supply (with a Corsair CX430), the issues continue.
I also get the odd BSOD - dump attached.
I've checked the following:
- Checked, rechecked and replaced all sata cables
- Scanned/chkdsk all HDDs
- Memtest for a few hours
- sfc /scannow
- UPS and new PSU as mentioned above
What else can I try?
Every time I remove my data stick from the usb port my computer shuts off. I have used the drive tools function to "eject" the drive but it still shuts off. I'm new to WIN 8 and can't navigate very well in this new system to find any answers. Why this happens ....
View 8 Replies View Relatedyesterday my laptop turned off suddenly and since then, everytime I turn it on it turns off before windows loading.I isn't hard drive issue cause I checked it and it works fine on other pc.I even tried to boot from cd but again it turns off.
View 9 Replies View RelatedI installed a clean version of windows 8 on my PC over the weekend and since then when I start it up it gets to the load screen and shuts down. When I start it up again it works fine. I have a Gigabyte GA-Z77X-UD5H motherboard, I went to their site and downloaded the latest drivers for ethernet and chipset.
View 6 Replies View RelatedI have been getting an error message when the computer shuts down, how to fix the problem? Could this be related to sleep issues the computer is having?
View 3 Replies View Related(Streams League of Legends) we play alot of games together, or atleast used to... After every game his computer shuts down for some reason, he is a lazy man. So I guess that's why I am posting his problem so we can play more games like we used to. He went away for a couple months on a holiday, he is back now and ever since he got back his computer has been having this problem with his PC shutting down after the game is finished.
His Specs:
OS: Windows 7
CPU: Intel i5 2500k (OC @ 4.5ghz)
MOBO: MSI P67A G45 B3
GPU: MSI Twin Frozr III GTX 560ti 448core GPU
RAM: G.Skill 8gb 1600mhz RAM
HD: Crucial M4 128gb SSD
I've been trying to configure my brand new hp PC with Windows 8.1 pro to auto-sleep but I have been unable to do so. If it hit the power button or select sleep from the menu it will sleep, however.
I ran powercfg/energy and it appears from the report that this is the issue:
System Availability Requests:System Required Request
The device or driver has made a request to prevent the system from automatically entering sleep.
Requesting Driver Instance HDAUDIOFUNC_01&VEN_111D&DEV_76E0&SUBSYS_103C2B04&REV_10014&3288eeae&0&0001 Requesting Driver Device IDT High Definition Audio CODEC
Why audio codec would prevent sleep? Is there anything I can do?
After a while when i'm browsing the web etc, my wireless connection goes to Limited and there are no other wireless networks available (when there should be 10+ networks).
When i disconnect that limited connection, there are suddenly no networks found and my wireless adapter disables itself and i can't re-enable it anymore. The only thing to restart my computer.
This occures after a couple of minutes. I had this problem before, but then it fixed itself for a couple of weeks and now i have the same problem again.
I've tried reinstalling my drivers, but doesn't do the trick..
I have an Asus N76VM laptop running Windows 8.1 Pro 64 Bit with a Intel(R) Centrino(R) Wireless-N 2230 adapter.
I know all the settings, both in power option and advanced section all settings are set to "do nothing" when closing the lid, but when i close the lid and open it later it turns on, in fact it was neither on nor sleep, power cable is connected always.
I have hp probook 4520s and Windows 8 x64.
I just had a new Seagate 1TB hard drive and Windows 8 installed in my Toshiba laptop. I also had ESET NOD32 Antivirus 6 installed. The only problem I have encountered so far is that the computer shuts down if unattended for about 30 minutes. Why this is happening and what I can do to prevent it?
View 2 Replies View RelatedLast night chkdsk tried to fix errors on C: on startup after I restarted my laptop. It was taking too long so I went to sleep, but in the morning, I had trouble turning the laptop on. When it did, the Automatic startup repair ran. Now the problem is that my laptop shuts down abruptly while startup repair is running. I'm not really sure if the repair finished running but, it was still saying that it was fixing errors. Everytime I turn it on the same thing happens. I can't use the windows 8 installation ISO in my usb because I can't set it to boot using the usb and I need to change my settings first to access the bios.
View 1 Replies View RelatedI recently reinstalled Windows 8 completely because I bought an SSD for in my laptop. I exported my power plans I used before the reset (when Windows was still on the HDD) and imported them again after the reset. In every power plan, Windows should go to sleep mode when closing the laptop lid, but that's not what's happening. Instead, Windows shuts down entirely, but the power light on my laptop indicates it's in sleep mode (flashing slowly). I also tried the built-in power plans (after just adjusting the appropriate setting), but the same happens. When i change the setting to do nothing (instead of going to sleep mode), it acts like it should: it does nothing.
I refreshed Windows but even now I recently reinstalled Windows 8 completely because I bought an SSD for in my laptop. I exported my power plans I used before the reset (when Windows was still on the HDD) and imported them again after the reset. In every power plan, Windows should go to sleep mode when closing the laptop lid, but that's not what's happening. Instead, Windows shuts down entirely, but the power light on my laptop indicates it's in sleep mode (flashing slowly). I also tried the built-in power plans (after just adjusting the appropriate setting), but the same happens. When i change the setting to do nothing (instead of going to sleep mode), it acts like it should: it does nothing.e problem still remains.