Changing Name And Description Of Volume Image
Oct 5, 2014I am using Windows 8.1 Update and Windows ADK.
How do I change the name and description of a volume image stored in a wim file?
I am using Windows 8.1 Update and Windows ADK.
How do I change the name and description of a volume image stored in a wim file?
I recently upgraded to Windows 8.1 from Win 8 (shoulda done more homework, but too late now!). Now when my speakers are plugged into my headphone jack, my volume control gets set back to 42ish. When I try to set it higher, I get a nanny warning about high volume causing hearing damage, and have to select "allow", which lets me change the setting, but sets it right back when I go to sleep mode or shut down. Most annoying as I use my laptop with speakers all the time as an entertainment center. Samsung, Windows 8.1 64bit, just updated audio driver, too.
View 2 Replies View RelatedI just bought a new Gateway that came with Windows 8, and the partition is GUID (GPT), so I am unable to use TrueCrypt for full-disk encryption. I wanted to change the partition, but the computer didn't come with a Windows 8 disk. All I have is a system image disk set that I created when I first set up the computer.
Can I open up command, change the partition table from within Windows, then restore the computer VIA system image? Will I need to get another drive first, or hook the current drive up to another computer and change there?
How might I go about changing the GUID to MBR without ruining the OS, because I don't have an installation disk for Windows 8.
I bought an asus laptop yesterday, this laptop came with windows 8 preloaded and in theory pre activated.What I did when i got home was turn my computer on, select a lenguage, add my email address, add my home network connection and create a profile. I dont want to need to type my email address everytime i turn this thing on so the profile i created has no password. When adding said profile i noticed that my windows 8 copy was not activated because i also wanted to change my profile pic and it would not allow me to do so, so i go investigate and the message i get is "Activation error description not found" and bellow that is a button that says "activate" and bellow that button there is a link to windows customer service. When i click the button that says "activate" i see a small rotating circle and the words "checking key" and then nothing else.
I tried to do a system restore with no luck.
I tried to reset my system but i need to have a recovery media cd inside or a windows installation disk that i dont have since it came pre-installed.
I tried to remove everything and re-install windows, i also cant do tha because of the previous reasons.
So i try to get a recovery copy(looked for recovery in system and opened the one that just said recovery) on some cds or dvds, but when i try to it wont let me because i am missing some files and its just not possible.
I'm using a Logitech 35 headset on Windows 8.1 64-bit and all drivers are updated but when i want to adjust the volume, the volume mixer becomes unresponsive and stops working and my headset stops receiving sounds.
View 3 Replies View RelatedI've been dual-booting Windows 8 Pro and Windows 7 Ultimate, but a while back my Windows 8 kind of went "South" and wouldn't boot at all (I got an error message that a device was "not attached"). I have a recent system image on an external USB hard drive, but when I boot to "system recovery" using my repair disk it can't seem to find my USB drive at all.
The tutorials here mention installing a SATA driver to access disks that are not recognized, but this doesn't seem to be the case.
I have problem mounting .iso images in Windows 8 Pro.
The error message I was getting was this:
and in powershell I got this:
Essentially the problem is that windows .iso mounting does not like 'sparse' files. I had used Acronis backup to backup my original .iso files and this DOES use sparse files. You can check if a file is 'sparsed' by looking at the files details in properties. The 'P' in the attributes represents a sparse file. See the screenshot below.
The result? When I restored my .iso images I could no longer mount them.
The simplest solution I have found is to just copy the .iso to a new file - this seems to create the new file without the sparse flag set.
I want to shrink my hdd but I get this error:there's not enough space available to complete this operation.
View 1 Replies View RelatedI've read that you have to go to the microphone, double click on it, go to the levels tab, and move the lever all the way up, as long as the boost lever. I don't have the boost. Only the microphone is present as you can see in the screenshot. That doesn't work.
I just downloaded Windows 8 last Thursday so all of my updates are installed. I updated to the latest drivers for my sound card thing, which I guess is intergrated. Now, before you tell me it's my mic, before Windows 8 I was using xubuntu until I could afford Windows 8. My microphone was fine. It picked up great. I could hide it behind my monitor (which is atleast 3 or 4 feet away) and it would still pick up fine. Now in order for it to pickup my voice like it did behind the monitor I have to have it literally 1 cm away.
[URL]
How do you increase or decrease a volume in Windows 8?
View 9 Replies View RelatedIs there any way to activate Volume License without KMS Server or KMS activator ? with MAK key ? And if yes, where to find mak key?
View 8 Replies View RelatedI've been having random volume fluctuations with things like youtube and iheart radio, as well as the occasional games. I've been searching the forums for a solution but the closest i can find is on the W7 forums, (Volume level continuously changes - Windows 7 Forums), which is the same problem I'm having with windows 8 pro. The last post on that thread is from September of 2012, so really I'm just curious if any new info or solutions have been made available. Like the op in that thread I as well disabled my communications and turned of the enhancements. I also uninstalled my audio drivers, restarted, and when it rebuilt the drivers they were newer than the ones i had. (Realtek 6.2.9200.16497, current driver) Yet still the problem persists. Team Speak 3 is the only web voice chat service i use, but that's only on when running a game.
View 5 Replies View RelatedSo instead of explaining what I'm looking at right now I'll post a picture here:
So as you can see that bar there is putting my volume automatically up to 100% every single time I touch it. Also, recently this has made the computer unable to drag the top or side or have any Windows 8 features available this includes both Windows buttons on my keyboard. I have tried cleaning my keyboard as that seemed to work last time on fixing this problem for maybe a month, however it worked for only an hour this time. It also seems note worthy that I cannot capitalize these letters at all: z x c v m , . and then I can't capitalize certain letters with certain shift bars so I can capitalize s with my left shift but not my right this happens with many other letters too but the ones I listed above cannot be capitalized at all.
My audio output is my graphics card via HDMI (ATI HD5770) which is connected with my TV.
I need some software/filters or something else to reduce volume amplification in movies?
Example, when actors in movies just talking then volume is ok, but if there a war scene then volume jumping up.
I've already tried Loudness Equalization, something like this Normalize Windows Volume With These Simple Tricks without success.
When I boot the sound volume is whatever I left it when I shut it down last time. I want to reset it to 20 each time I boot. Is that possible?
View 4 Replies View RelatedDoes Win 8 also come in retail and volume channel versions?
How can I convert retail channel to volume (as I fear I have downloaded a retail version) from the torrent link in the Win 8 repository listed in MDL forum.
Can a lkink to volume version of win 8 be posted here (or PMed) to me?
I have three Laptops in office and we have windows 8 Pro x64 activated with same Volume License Key. Now I need Windows 8.1 Pro x64 and tried searching 8.1 in store but cant...then tried with windows 8 key and it says you cant use retail key so read in forums that I need windows 8.1 x64 Pro volume License iso file.
Is there any magnet or torrent link where I can download windows 8.1 x64 pro for VL installation? Also tell me if I would be able to activate 8.1 pro x64 VL iso with the existing VL key of windows 8 64bit pro.
Is it possible to change the volume of the notification sounds ?
View 6 Replies View RelatedI cannot stand having to hold the "Function" key plus the volume up F12 or down F11. I want to remap some keys to be a direct volume up and volume down.
View 2 Replies View RelatedIn my Windows 8 laptop, I have a C-drive of 421gb in which 358gb is free. As I tried to partition another disk of 300gb It was not allowing me that in shrink volume. It is allowing only 25gb to divide. What to do???
View 5 Replies View RelatedI have a problem with System Volume Information in my Drive D: (239GB), enlarged from 5GB to 60GB (Check from My Defrag). and the free space down from 113 GB to 51 GB. I don't know how it works, it happen when my System is under Automatic Maintenance (in Windows 8). I want to save my disk space. I have check my disk using CHKDSK. i found error, and fix that. I check again, and found no Problems.
View 6 Replies View RelatedIs there a way to disable the volume and brightness on screen displays? I rather use the ones provided from my manufacturer, rather than seeing both.
View 1 Replies View Relatedi recently got a new laptop "asus vivobook" that came preloaded with windows 8.
The laptop comes with a hybrid 24 GB ssd (8GB of those are for the system files,windows 8 is installed on,the remaining are in a 2nd partition for recovery) i deleted the recovery partition and made a recovery on an 8 GB usb drive,because im dual booting a different linux os alongside windows.
I used rEFInd boot manager to boot the 2 operating systems,everything boot and works fine.
However,since the dual booting started i noticed that the windows 8 loading time has became a bit slower,when i choose to sart windows 8 the asus logo appears and under it this message
"Scanning and repairing volume (?Volume{...large hex identifier..}): 100% Complete"
it stays for 2,3 seconds and then windows 8 start,i ran a chkdsk for the c drive,but that didnt solve the problem.
I got a problem on the Volumer Mixer. All started yesterday after i decide to install my new speaker...
Basically before i could control all the computer volume but now when i go to volume mixer there is a lot of stuff open and then i need to control each volume for each application...
I want to be able to remove all applications and be able to put louder my volume with only one slider. Here is a picture of the problem:
The Device is my Headset a Logitech G930. when try to turn the volume louder on this slider:
Doesn't get louder like the headphone used to get.
So, the system volume in the system tray goes from 1-100. 1 is comfortable. 3 is loud. 6 is ear-splitting.
Is there anyway I can redefine the values for the system volume and set the maximum to like... 10?
Any time I hit the volume buttons on my keyboard to lower the volume, it goes from 1 to 0 and I can't hear anything, so I hit the volume up button and it goes from 0 to 3 and it's way too loud.
Right now, I have the volume set to about 3 most of the time, with individual apps' volume controls set really low (like a game set to volume "0.5" out of 100).
This is just ridiculous. There must be a way to redefine the value for the system volume. Some settings file I can edit or something, if not a nice GUI method.
I am trying to copy files from my cpu using win 7 to a friends using win 8. hd shows up with the volume used but files are not viewable. tried to copy and past to a new folder saw all the music files as they were pasteing . after I opened the new folder some files were there about 2gig out of 414.
View 9 Replies View RelatedMy new laptop seems hardwired to think that if I set the volume to 20, so long as I have headphones in, I want my volume at 20 for all sounds, ever. This makes music which varies from quiet and loud feel extremely alien and even ruins the feel of some videos and games. But it's most notable when watching a youtube video and I change the volume. Turning it up makes the video louder for a split second before returning to what it was, turning it down? Well, that works for a few seconds and returns to being too loud.
My new laptop uses HP Beats Audio. While I'm currently blaming Windows 8 for this problem, it'd be silly not to mention it. Unfortunately, a google search didn't get me any answer for beats either except how to uninstall it.
This doesn't happen on my old Laptop, which runs Windows 7 and appears to lack a special audio device. Looking online for a fix has only returned me nonsense about Windows 8 reducing volume for communications devices (a feature which I have off). In my search, I found this bit of information from Winsupersite.com:
"Incidentally, Windows 8 new Metro-style volume controls lack many of the more sophisticated controls that are available via the desktop. There's no way to control the volume of individual Metro-style apps, for example, and that's true of both the new Metro volume controls and the legacy desktop interfaces. Instead, the system automatically controls app volume, muting or lowering the volume of background apps when needed."
So... I suppose in short what I need to know is, how do I turn this "feature" off?
When using my computer and streaming netflix, i generally use my HD tv as my video card has audio built in over HDMI and i use it to stream movies to my HD tv ,with netflix app for windows 8. but on some movies the volume is totally Low and i have to crank my tv to here the voice leaving me with very loud music when it comes on. is there a solution to fixing this? i make my TV volume default when i watch netflix. How to make it louder. I have seen this thing called loudness equalization under enhancements on the HDMI audio would that do it or would it make more noise then do any good?.
Alienware x51 with windows 8 pro and media center.
PNY GTX 660TI video card.
I've successfully setup Speech Recognition but when I restart the computer, I receive the following error message...
When I try accessing "Advanced speech properties" to troubleshoot, I receive the following error "could not initialize volume meter. Please select a different audio input device".
Then the "Speech Properties" dialog box pops up and when I click "Advanced" and select the audio input device, the "Speech Properties" dialog box freezes every time when I try to hit "Apply".
Running Windows 8.1 x64
I have been noticing recently, my C drive gets occupied fully even if there are no bigger programs installed.
Out of 150gb, after uninstalling few programs, the space left was 30gb. Day by day it started decreasing and i saw 20gb today.
I used the disk cleanup tool and it shows only 100mb after selecting all fields.
I was worried still that space was not freeing and ran this program WinDirStat. Here are the screenshots.
System Volume information folder occupies 75% of space - meaning 100gb.
There are lot of files which were around 1gb - 2gb and they are created from 2013.
why 100 gb? I read that this service is important but why is it taking this much of space.. remove these unwanted older files if any.
I tried below options after googling and also searching in this forum:
Used disk clean up tool and selected more options > system restore and shadow copies > deleteDisabling and Enabling System restoreDeleting shadow copies through VSSAdmin Delete Shadows commandVirus scan in System Volume Information folder (after taking ownership of that folder) through Kaspersky and ESET SSManual delete of the files.Selecting delete option in System Protection > ConfigureChanging maximum usage to some x%
I have tried all these methods but still those files are existing.
Whenever I increase the volume the sound is really horrible, like from cheap $3 speakers. The sound is NOT clear at all. I tested the same files (mp3, FLAC) on another device and it is just great.
Here's my setup:
OS:
Windows 8 - all updates
Soundcard:
Asus Xonar D1 interne PCI Soundkarte 7.1, Digital Out, Dolby Technik, Eax, 192kHz 24bit, Low Profile - newest driver
Mainboard:
Intel DP55WG - onboard sound disabled in BIOS
Speaker:
Teufel Concept B20