Does not recognize my Airport Extreme or Express even though they are working fine and recognized by my iMac in the other room. I currently stream iTunes via the iMac, but would prefer to use my Windows 8 machine. But, so far, no go with Airport and iTunes does not have a speaker selector (probably cuz Airport not working).
Is 5.6.1 not Windows 8 compatible? If not, is there a more recent version?
Is there a version of Itunes that's compatible with Windows 8? I've installed Version 11.0.4, which is supposed to be compatible, several times, but it just won't run.
View 4 Replies View RelatedI only get a buzzing noise out of my speakers when I play music. Otherwise I get nothing. Under device Manager it says;
VIA HIGH DEFINITION Audio
Provider MS
Date 17/02/2012
Version 6.2.8250.0
Signed MS
My Motherboard is an ASUS M5A78L-M USB3
It also gives a warning that "Device is not compatible under current OS"
I'm planning to purchase Office, which version of Office is compatible with Windows 8 Pro?
View 8 Replies View RelatedI did the Upgrade Assistant from Win7 pro to 8 pro and this is what I was told:
Secure Boot isn't compatible with your PC
Your PC's firmware doesn't support Secure Boot so you won't be able to use it in Windows 8.
More info, I really want Secure boot, however. I have a UEFI BIOS. I am willing to upgrade or clean install, as I will never use the previous windows 7 version again. Is there a way to get Secure boot with my computer [when I upgrade to 8]?
Secure boot requires firmware that supports UEFI v2.3.1 Errata B and has the Microsoft Windows Certification Authority in the UEFI signature database. How do I get this?
After three days of trouble shooting my system with MS. It turns out that my Gigabyte X48-DQ6 MB is not compatible with windows 8. Intel X48 chipset is a no go at this point.
View 9 Replies View RelatedI began an installation this morning after paying FIRST the Windows 8 upgrade fee for the install.
The preinstaller said my machine might not be compatible because it appears that my processor would not support NX, but it would try to turn it on when installing.
Well.....after nearly an hour of installing at the very end it says... there was an error and your system cannot be installed and we are returning you to your original state.
I am STUNNED that Win 8 will not run on something as recent or advanced as an HP XW6200 workstation. What the heck is Microsoft thinking to design an OS that will leave out such recent and advanced equipment.
I've looked all over HP, MS, and the net to see if there is anything about these workstations and NX, but I cant find any info.
On HP website they simply say there is no information on whether or not the xw6200 is compatible.
I cant find anything in the BIOS to turn on NX.
I have several of the xw6200 and many more xw6400s which I am sure will be the same issue.
I have a HP Pavilion dv7 running Windows 7 64-bit and Office 2010 Starter. There is a known issue that when you attempt to run the Windows 8 upgrade Assistant, it displays Office 2010 Starter as "Not Compatible". In order to correct this, you need to install an update (KB2553141). The problem is that even with the update installed, the upgrade assistant still points the Office 2010 as not compatible.
View 2 Replies View RelatedI have a 2 tb Network store on a 1 gig Ethernet, which worked fine on Windows 7.
I ran the upgrade advisor this facility and software was not identified as a potential problem.
However it does NOT WORK.
It just says it is incompatible on Windows 8.
The Novostore website is not useful.
There is no useful information as to if or when it will be made to work.
whether the Sony HDR-SR12E handycam is compatible with Windows 8.1? I am trying to decide whether to buy this video camera, and it will be nearly as expensive as my computer. I have asked Sony and the Sony forum but have not received a response. To be honest, I don't know how the operating system is involved with transferring AVCHD files from the hard disk or memory cards of a handycam. I notice in file associations on my Windows 8.1 system that .mts (AVCHD) files can be associated with programs, and I have Adobe Premiere Elements 11 installed, and the user guide indicates that AVCHD files can be imported. I'm in unknown waters with transferring files from hard disk video cameras.
View 5 Replies View RelatedThe windows 7 usb/dvd tool will not recongnize my flashdrive. I am trying to install windows 8 on my friends laptop but it will not work it says there is no compatible flashdrive in the computer.
This is the message it says : There is the flashdrive i using, there is the information about the flashdrive
Is it the flashdrive and how do I get it to work. I tired using a fat32 format on the flashdrive that did not work either.
Most of the game i've installed are not compatible with my windows 8 single language. Of course my laptop's requirements are enough for the game but the problem lies within the windows 8. Are there any solutions to this matter ?
View 2 Replies View RelatedOne week ago I bought a new Inspiron 15-5547 with Windows 8.1 preinstalled. I tried downloading some online games and they simply will not work. My machine freezes as soon as I log in. I've been told by a GM from one of the games that the problem is that the game requires DirectX 9 for graphics and what is being downloaded is DirectX 11 which does not have some files that version 9 has. I have bounced back and forth between the game forums and Microsoft without success.
I have tried downloading all kinds of DirectX End User Run Times from Microsoft and one of two things always happens. Either the installer says I have the newest version and I do not need DirectX 9 or the installer says that I do not have a version of Windows that can run DirectX 9. Apparently, that installer is old enough that it can't recognize Windows 8 as an actual version of Windows. The only other suggestion I've gotten is to install an older video driver from Dell and see if that will work.
I have a Windows 8.1 Pro 32bit and I want to find out if my computer is 64bit compatible. How do I do that?
View 7 Replies View Relatedfor starters, this is a sony vaio e series laptop...
I know, if I enable the option, when I do a normal shutdown I can charge, say my mp3 player from my usb 3.0 port.
what I want to know is if I close the lid like I normally do at the end of my day, can I charge my device and not say..wake the computer from what is essentially a hybrid shutdown type sleep mode?
An update for Windows Server Update Services 3.0 Service Pack 2 is available (KB2734608)
Win 8 didn't update with WSUS. This was released today. Works with Windows 8.
before purchasing I wanted to confirm if Logitech C110 webcam is compatible with Windows 8. I could not ensure the compatibility from Logitech website.
View 8 Replies View RelatedI have just done a clean install of 8.1 on my old MacBook Pro as I broke the screen on my normal laptop. I could only afford to give 40GB to this new installation so I'm quite tight for space.
I've always used [URL] .... to check for disk usage but in my case it is not useful as it shows size of items not the size on disk. I have to keep my OneDrive files on-line only to save space but as they are reported as part of used disk space I am seeing 150% of my disk space is used which isn't useful really. In Disk Management I can see it is only 59%.
Any utility like WinDirStat that shows size on disk?
in IE10 (while trying to download 2GB file from MEGA service) I got popup, that IE10 is incompatible with MEGA, so it can download only small files.
View 3 Replies View RelatedIf I decide not to buy the whole package of a new Windows 8 and 8.1 Desktop PC, will a Windows Vista monitor be compatible to run with Windows 8 and 8.1?
View 9 Replies View RelatedOS: Windows 8.1 Pro
Processor: AMD FX-1400 Quad Core
RAM: 8.00 GB
Storage: 1.73 TB of 1.81 TB available
System Type: 64-bit Operating System, x64 based processor
A while ago, my PC was having some lag issues that made the computer practically unusable. I found out in msconfig that I had almost all services running. I disabled many of the services, and I made sure not disable the necessary ones (i.e, Windows Audio.) I restarted my computer and there was a red circle with a white "X" over the audio icon. I clicked on the icon. A window named "Playing Audio" opened. On the window was a bar similar to the one shown while loading/downloading something. Above the bar said "Detecting Problems" and then "Scanning for hardware changes...". This went on for about 10 seconds. After this, the window changed. At the top in blue was "Troubleshooting has completed". Under that was "The troubleshooter made some changes to your system. Try attempting the task you were trying to do before." In the center of the window was "Problems found-Hardware changes might not have been detected".
In the search bar, I typed "Manage audio devices". When I opened it up, the window told me that there were no audio devices installed. I have checked in Device management under "sound, video and game controllers" That I have sound drivers installed (AMD High Definition Audio Device & High Definition Audio Device.) I have tried multiple times to uninstall/reinstall the drivers to no avail.
I have a windows 8 laptop and today the sound just stopped working. The windows audio service will not enable and everytime i try to enable it fails due to a duplicate in Windows Audio Endpoint Builder.
Now tricky part is i cant open control panel as it doesn't load, i tried reinstalling windows 8 but it also not load. This all was working perfectly just earlier today. I have no sound, just an x by the sound.
I've been trying to configure my brand new hp PC with Windows 8.1 pro to auto-sleep but I have been unable to do so. If it hit the power button or select sleep from the menu it will sleep, however.
I ran powercfg/energy and it appears from the report that this is the issue:
System Availability Requests:System Required Request
The device or driver has made a request to prevent the system from automatically entering sleep.
Requesting Driver Instance HDAUDIOFUNC_01&VEN_111D&DEV_76E0&SUBSYS_103C2B04&REV_10014&3288eeae&0&0001 Requesting Driver Device IDT High Definition Audio CODEC
Why audio codec would prevent sleep? Is there anything I can do?
So about a month after I bought my computer,all of a sudden there was no audio comming from my headphones or speakers. i do have to say that windows 8 was a bit new for me because i was using windows xp the only way i can get audio now, is by plugging in a usb with bluetooth connection. even HDMI won't work. i'm getting no errors when running errorchecker.
Perhaps usefull info:
-pc Model No: HP ENVY h8 PC series
-running windows 8.1
-i have extra beats audio (for audio settings).
I have a Gigabyte GA-F2A75m-HD2 (Rev 1.0) board and this is quite an odd one. The front port worked with Ubuntu and other Linux distros but it seems to be the opposite case with Windows 8.1. I installed the latest Gigabyte version of the Realtek HD Audio Manager but it still doesn't work. What should I do?
I have the codec ALC887
Last night I restarted my computer and for some reason when I booted it back up I was not able to use my headsets sound. I went through the settings disabling audio drivers and nothing worked, I also tried to change the default audio device but that wouldn't work either. For some reason I can't change any audio settings when i press OK and open back up the windows the settings are the same.
The thing that puzzles me that everything was working fine until I restarted my computer. I am also confused why windows won't let me change my default audio device under the playback devices menu.
Details: Headset: Turtlebeach P11's
I am trying to install a driver for the Epson perfection 1200U on my grandpa's new windows 8 PC. Problem is that the scanner is too old and epson doesnt provide a driver for this scanner for windows 8. But how to uncheck "show compatible hardware" in device manager when you are trying to update drivers on a specific device.
I get there by right clicking on the device, selecting properties, "browse my computer for driver software," then "let me pick from a list of device drivers on my computer," then after that the window that appears does not have an option to uncheck "show compatible hardware." And so I can't continue
Maybe a very few of you have read my topic on Vistaforums. I have "only" 5 operating systems on PC.
XPSP3
Vista SP2 x64
7 SP1 x64
8 Pro x64
Ubuntu 12.10
After Microsoft released the 8.1, I knew that the time of Windows 8 is gone. If the PC is better than a Pentium D it does not worth bothering with it. But I installed this 8 in May, becuse there was no working bootloader on my PC, and that was the easiest way to have one. Also it turned out that Metro isn't that bad, it's fast and good. Also D3D optimizations like for BF4.
But Windows 8 won't get IE11, cannot run Asphalt8, no further support, etc...
So I would like to do the upgrade. So the question is, a new install with Windows 8.1, and having 6 OS's, or formatting Windows 8 partition and installing 8.1?
XP is necessary for a huge load of apps from the early 2000's, it's the only 32bit OS on my pc, and some hardware only supports this or older OS's.
Vista: backup OS, if I mess up everything, and native DX10.0
7: daily usage, mostly supported with drives for todays phone flashing
8: FAST, so I use it a lot.
But there are incompatibilities. Some phone flashers won't work on 8, and some games are glitchy too (today's discovery is PoP Sands of Time). So I wouldn't delete XP and 7 for any money.
So, is it necessary to keep Windows 8? Is there anything that works only on 8 (like DX10 was on vista)? Because if there is an app, that doesn't work on 8.1, but runs well on 7 and 8, I won't keep Windows 8.
write a comment with the name of the application, and I will decide. Currently, I'm planning to delete Windows 8 and install 8.1 if I will have time.
How I would go about setting up two audio sources at once. I was hoping to use both my internal speakers as well as a Bluetooth connected HDMX Jambox. I know at the very least Windows 8 will output audio to both of the devices at once, as it will let me "Test" one or the other from the sound properties panel while I'm actively playing audio from a youtube video. The question I had was how to set them both up as default devices so that they playback the audio in sync.
View 3 Replies View RelatedSo my sound works fine for almost everything, except AIMP3.
All sounds work,VLC,chrome,system sounds,etc......
Not sure why it doesn't seem to work for the application. I re installed the application and nothing changes.
Not sure if this is a driver/codec issue? It shows it as sound playing,but no sound actually comes out of the speaker. The same files also play on VLC.
Recently I decided to go ahead and update to the Windows 8.1 version of the Realtek HD Audio Driver. I procrastinated because it told me I'd have to uninstall the original audio driver and I knew it would take a while to do everything needed. It didn't work that after uninstalling the original audio driver, then restarting like Windows told me to do, I kept getting error messages that forced my computer to restart until eventually my computer let me log in and install the updated audio driver.
However, with the updated version of this driver I had the same issue I got with the original one only much much worse. The original Realtek HD Audio Driver that I had on my computer made music and videos sound absolutely awful when headphones were plugged in. I found out that this is because the driver automatically puts on so-called "enhancements" whenever headphones are plugged in. This was a very simple fix, simply go to "Sound", then under "Playback" you click on "Speakers", then go to "Enhancements" and check the box labeled "Disable all sound effects." Then sound through headphones would return to normal.
Well, with the Window 8.1 version of this audio driver, I can do the same thing, but it never stays that way. Every time I plug in my headphones, it resets back to having enhancements. The strange thing though is that it says the enhancements are disabled but when I reactivate the enhancements(No difference in sound quality) then deactivate it again, suddenly the sound through my headphones is back to normal.
Did the audio driver not install properly? Is there something I can do to permanently disable the audio enhancements?