Just got a new laptop with windows 8, not familiar at all with the OS, but accidentally misspelled the account name. Obviously, this has little impact on functionality, but I would like to change the name so any files I have from my other computer get put in the proper location without having to correct the username typo when switching back and forth. Basically, how can I go about changing the account name on my computer. There are no other users, I just set it up today.
When setting up Windows 8 64-bit Pro on the page titled "Sign in to your PC" I choose the sign into my Microsoft account as opposed to "Sign in without Microsoft Account". Big mistake. It created a username called dwmad_000 which is part of my email address used for that Microsoft account.
To amend this username to one of choice, I changed the name in my online Microsoft account and also from C.Panel created a local account. I now have both in Windows Explorer but the default one is always dwmad_000.
How to get rid of dwmad_000 or change it permanently to First Name Last Name and sycn the 2.
I do a lot of remote administration after hours and I often login as an admin user into client workstations to fix various issues. One thing that I do to eliminate confusion is to edit the registry of a Win7 machine and change the HKLMSoftwareMicrosoftWindowsCurrentVersionAuthenticationLogonUILastLoggedOnUser registry value back to the user's username.
That way inattentive users don't keep trying their password with the Admin username when they attempt to login the next day. I see that Windows 8 has the same key, but changing that value doesn't appear to "stick". It appears to be overwritten when you logout/reboot/shutdown. I've also tried deleting the SAM entries in the same key, but that seems to have no effect. I've seen several posts on how to show all users or none on the logon screen, but I'm trying to minimize the changes that end users will experience (complain about). I'm also hoping for a solution that will work with both domain and non-domain joined computers.
I had a new Windows 8.1 Pro system installed. Was able to logon to it with no problem. The computer name was OWNER. Changed it to what my previous computer was named. Now during startup the Admin logon gives the following message:
The user name or password is incorrect. Try again.
When I click on 'OK' I'm presented with a signon screen with Admin as the user name. No password that I enter works. When I lookup the signon accounts Admin is NOT one of them.
Listed the user accounts and found the following item for Admin:
When installing my Windows 8, I put the PC name as "Usmaan" and the account name as "UsSy" but after the installation and having used the laptop a bit more.. I changed the account name to "Usmaan".
The problem which I have is that although the account name has changed to "Usmaan", I still see the name "UsSy" every now and then when doing some development or when I for example check the path of files.. it will says C:...UsSy...file.txt
I should also state that when I was installing Windows 8, I tried specifying the account name as "Usmaan" but it complained that I cannot have the PC Name and and the account name the same.... hence why I put it as UsSy.
How do I change the UsSy name to Usmaan permanently?
Bought a new laptop for my daughter with win 8 and got it set up. Being the newbie I am, every time my daughter starts her laptop my name appears on the user account. She wants thi changed. How I change the name of the user account. This is the only account on the laptop and it has administrator status (I did however get name of computer right) ?
I have a 2-month-old Dell Inspiron 15 notebook running Windows 8.0, and trying to upgrade to 8.1. I have plenty of HD space and 4GB memory. I have 2 user accounts, one with admin designation. I want to change the admin to the other, but I cannot. When I try to change the user accounts, I get a message requiring the account with admin to OK any changes.
When I enter that account's password, I get a message that the password is incorrect. I changed the password in the "reset password" site online, but that password doesn't work in the change users part of the PC. So I am stuck. Right now, I cannot affect any changes to the system, because that requires the OK of the admin user account, and that in turn requires a password, which seems not to match the password that I entered for that account.
I'm wanting to change the email address I use to log on to my system. Is there an easy way to do this or do I need to back up all my files and move them over to a new account?
When I installed Windows 8 I didn't use a Microsoft account, but to use Skydrive, I had to connect, and when I did this, it changed my username, is it possible to change my username instead of using my Microsoft.com account's name?
I recently sold my Gateway laptop and the Windows 8 software was already installed with purchase. I want to remove my info and myself as the primary user in windows 8 so the new owner can set themselves up. I tried on my own to figure out and was only able to set up a separate "User" for the new owner until we can resolve.
In this screenshot you can see what pops up every time this new user logs in to our local network domain. The server name is "goodbuddy" on "TRUCKERSREPORT" domain and it seems to be running some kind of setup right at login every time. I don't want to allow this user admin rights for program changes, but i need to make it so an administrator doesn't have to enter their credentials in this every time this user logs into their computer.
My Windows 8.1 machine has only one interactive account - the built-in "administrator" account. It is just an internal file- and media-server without a monitor, which is accessed exclusively through Remote Desktop.
I would like to change the "user picture" associated with that built-in admin account. Trying to do it the "usual" way - through Control Panel -> User Accounts - does not work. Apparently, user picture selection is handled by a Metro app. And Metro apps are not launchable from the built-in admin.
Most likely there are workarounds. I can try using that hack that enables Metro apps under the built-in admin. Or I can add another interactive admin account and try changing the picture of the built-in admin from that other admin. I don't know whether any of these will work, I haven't tried yet.
But is there a more straightforward way to set the user picture for an account? Like copy the picture file to some folder or something like that?
Is my windows corrupted. I cannot change or add or turn on guest account in windows 8. when I click on manage on account nothing happens. and when i click pc setting from the charm the user tab is not there. what happen fix this issue whithout resetting windows..
HP laptop with Windows 8.1 updated. I want to change my log in email and still keep everything I have in that account. Setting up an alias starts a new account and I would have to reinstall everything I already have installed. Is it possible to do to just change the email addie and keep everything?
I got this error message "Setting the account picture failed, please try again". I need to know how to fix this, i got this error after i browsed the pic i wanted to use.
Here's the screenshot, I'm not using a pirated copy of this OS.
I have a friend who keeps getting borderline malware (e.g. browser toolbars) installed on his computer. There is even an active antivirus on his pc (I believe norton). It comes with his new pc and is valid for 1 year.
After I clean his pc, if I change his account type from administrator to limited user, it should prevent any toolbars from installing, right?
Would this break any software or cause any file to become inaccessible?
I have win 8 when running apps in "run as administrator" and when running most of apps, windows give me this message:
" do you want to allow the following program to make changes to this computer? . . . to continue, type an administrator, password and click yes. "
but yes button in deactive and there is not any password field to fill it.
I dont know in which type is my user account ?? standard or administrator?now I can't do many of actions in windows for this reason and can't enable administrator account and switch to it.
how to change my account type back to administrator but with no luck.
I have been running this laptop as my main machine for a few months now with no problems, however, I realised I had a problem when I wanted to change some networking settings on Friday when the UAC said I needed admin privileges and wouldn't let me enter a password or click "Yes", hence not allowing me to go any further.
I went to control panel > User accounts and saw my account type has been changed to Guest.
Now I have thought long and hard and I have not changed or had any need to change my account type to guest, nor has anyone else had access to my laptop, so I can only assume this has been done in the last week or so during a Windows update.
I'll tell you what I did to try to resolve this below:
First of all I tried to enable the hidden administrator account while in my account by running command prompt as admin (and then entering net user Administrator /active:yes) but as I don't have admin privileges I couldn't even open the command prompt so I couldn't get any further.
After reading around the net and this forum I found this thread and gave it a try. After restarting the laptop and booting into safe mode I was expecting to see and Administrator account next to my account at the log in screen, however, there was only the administrator account to choose from, so I clicked it and it went through the first time initialisation of the account and then showed me the start menu, I then went to run the command prompt as admin and it worked, I entered net user Administrator /active:yes which worked with no problems. I then went to the user accounts in control panel to "Manage other accounts" but my usual account was nowhere to be found. So I thought I'd restart the laptop and see what happens out of safe mode.
When it restarted I was still only presented with the admin account, so I logged in to disable the hidden by entering net user Administrator /active:no in the command prompt run as admin and then restarted.
After restarting again I was expecting to see my account but was still presented with only the admin account, but when I clicked on it it said it was disabled and I was completely locked out of windows.
Luckily I created a restore point so I managed to restore my settings, and was back at square one.
After a bit of testing it seems my main user account is being removed when I enter safe mode, but do nothing else. Why entering safe mode is removing my account.
I am at a bit of a loss as I can't seem to activate admin privileges on my account, but if i try to fix it I lose my account completely.
(The following terms are translated from German, but perhaps not correctly)
At present I try to familiarize with Windows 8 with a new Toshiba Laptop.
There exists only one user with the name Helmut. I created a local account with the name "Helmut". But in the folder-display Computer --> xxx(C: ) --> users appear only the two folders "Public" and "TOSHIBA". I tried with execute --> control userpassword2 --> properties to change the name (from TOSHIBA to Helmut), but again in the folder-structure remains "TOSHIBA".
How can I change the display of this name to the name of the user (e.g. to "Helmut")? Perhaps in the registry? But where?
As in win7 I got a super admin account, and a normal working account. When installing win8 I had to enter the username of the administrator (mine), then I created my working account (also mine). To distinguish betrween the 2 I would like to call my administrator account 'administrator'.
How to change the username of the super administrator?
When I created my User Account I named my Self Jack B..... (end of last name) It showed as JackB_000 for some reason, I thought it was because my Account name was to long. So I changed my full name into just my first name, the user account stayed the same, only changing to what I set in Metro and Start8 (Start8 is an alternative to Metro bringing back the start bar).
I like to make my own custom Username for any Windows installation. However, Windows 8.1 Pro will simply create a Username for me based on my Microsoft account and that Username is just not tidy enough for me with dashes and not something cool and it doesn't ask me whether I want to type one up myself. The only way I found to prevent that from happening is disconnecting from the internet or disabling NIC in BIOS. Is there another way of doing so?
On three the User Accounts dialog box has the phrase, "Users must enter a user name and password to use this computer." I have deselected that box and entered the passwords and now I log in automatically.
But on one computer in the User Accounts dialog box there is no phrase, "Users must enter..." and there is not box to deselect.
just yesterday I bought a new desktop PC which run with Windows 8.At my first startup of Win 8, the PC asked me a registration on Microsoft website and a creation of administrator account.When I did the second startup, Win 8 asked me to write the administrator password, but my password doesn't run, and also the PC's name is the same of my e-mail address and not the name that I had chose with my first registration. So I think I made some mistake during registration and also now for me it's impossible even know the e-mail address used for the administator account registration.On Microsoft's website I haven't found information for recover account name (the email) and password.Before switch off the PC for the first time, fortunately I created a second account (user) on my PC, so now I have the access to the PC only like user and not like administator.How I can solve this situation?I haven't an important file of software on my PC (because is new and I have not had time for install nothing!).
I have recently set up a Win 8.1 notebook and from a cold boot Win comes up with a confusion by showing part of my email address as user (a hangover from a MS account) but, after saying that the username is incorrect, then allows me to enter my local account / network creds.
I decided that, since the machine could go on the road from time to time, I would reintroduce the need for username and password. I would like to tidy up this mixed-up situation by having to enter my local account details and not have this 'error' message from dear old MS pop up. Having part of my email address appear on bootup is hardly useful in terms of security.
I had recently activated my Administrator's account on Windows 8. But I was tired of having to put in the password each time and I made it where it would bypass that by hitting the windows key plus the x key then clicking on the Command Prompt (Admin). I put in "control userpasswords2" and hit 'enter', then I unticked the box that says "Users must enter username and password to use this computer" then click apply and restarted my computer.
I need more privacy on my computer and I want to have it where people have to sign in with the user name and password to use my computer. But when I do all the same things and tick the box again that says users have to use the username and password etc... it doesn't seem to work. It still doesn't require my username and password.
I bought a shiny new laptop yesterday with windows 8 pre-installed. After setting a few things up, i restarted the computer for the first time. At this time the computer downloaded many updates. On start up since my user account has been downgraded to a guest account. This is the only account on the computer, as such i do not have administrator rights and i am unable to log in as an administrator.
May I have to restore the computer back to factory settings but how to do this without being the administrator.
I am a system administrator in a large enterprise environment and we are doing a rollout of Windows 8.1. In our image capture we somehow captured a setting that is disabling users from setting up a connected account with their domain account. I am relatively sure that it is in my unattend and I can fix it for machines going forward but I really don't want to have to reimage the machines I've already deployed.
When I go to connect an account, the "connect to a Microsoft account" option is grayed out and the "some settings are managed by your administrator" message is displayed at the top. This is NOT a group policy object that is applying. The machines are in a test OU and there is absolutely no policy applied. I have searched all through local policy and even did a search through the registry for "account" (that took forever) but have been unable to find any registry key or local policy that would be causing this issue.
What setting might be causing this? I have 30+ machines already out in the environment and the user experience is going to be terrible if I have to reimage them all.
How can I connect my hotmail account to my Windows account? I have connected that mail to my account on previous installation. My OS is Windows 8 Enterprise x64.
