As in win7 I got a super admin account, and a normal working account. When installing win8 I had to enter the username of the administrator (mine), then I created my working account (also mine). To distinguish betrween the 2 I would like to call my administrator account 'administrator'.
How to change the username of the super administrator?
just yesterday I bought a new desktop PC which run with Windows 8.At my first startup of Win 8, the PC asked me a registration on Microsoft website and a creation of administrator account.When I did the second startup, Win 8 asked me to write the administrator password, but my password doesn't run, and also the PC's name is the same of my e-mail address and not the name that I had chose with my first registration. So I think I made some mistake during registration and also now for me it's impossible even know the e-mail address used for the administator account registration.On Microsoft's website I haven't found information for recover account name (the email) and password.Before switch off the PC for the first time, fortunately I created a second account (user) on my PC, so now I have the access to the PC only like user and not like administator.How I can solve this situation?I haven't an important file of software on my PC (because is new and I have not had time for install nothing!).
View 6 Replies View RelatedJust got a new laptop with windows 8, not familiar at all with the OS, but accidentally misspelled the account name. Obviously, this has little impact on functionality, but I would like to change the name so any files I have from my other computer get put in the proper location without having to correct the username typo when switching back and forth. Basically, how can I go about changing the account name on my computer. There are no other users, I just set it up today.
View 1 Replies View Related(The following terms are translated from German, but perhaps not correctly)
At present I try to familiarize with Windows 8 with a new Toshiba Laptop.
There exists only one user with the name Helmut. I created a local account with the name "Helmut". But in the folder-display Computer --> xxx(C: ) --> users appear only the two folders "Public" and "TOSHIBA". I tried with execute --> control userpassword2 --> properties to change the name (from TOSHIBA to Helmut), but again in the folder-structure remains "TOSHIBA".
How can I change the display of this name to the name of the user (e.g. to "Helmut")? Perhaps in the registry? But where?
I do a lot of remote administration after hours and I often login as an admin user into client workstations to fix various issues. One thing that I do to eliminate confusion is to edit the registry of a Win7 machine and change the HKLMSoftwareMicrosoftWindowsCurrentVersionAuthenticationLogonUILastLoggedOnUser registry value back to the user's username.
That way inattentive users don't keep trying their password with the Admin username when they attempt to login the next day. I see that Windows 8 has the same key, but changing that value doesn't appear to "stick". It appears to be overwritten when you logout/reboot/shutdown. I've also tried deleting the SAM entries in the same key, but that seems to have no effect. I've seen several posts on how to show all users or none on the logon screen, but I'm trying to minimize the changes that end users will experience (complain about). I'm also hoping for a solution that will work with both domain and non-domain joined computers.
When setting up Windows 8 64-bit Pro on the page titled "Sign in to your PC" I choose the sign into my Microsoft account as opposed to "Sign in without Microsoft Account". Big mistake. It created a username called dwmad_000 which is part of my email address used for that Microsoft account.
To amend this username to one of choice, I changed the name in my online Microsoft account and also from C.Panel created a local account. I now have both in Windows Explorer but the default one is always dwmad_000.
How to get rid of dwmad_000 or change it permanently to First Name Last Name and sycn the 2.
I have a new dell and set it up with the administrator having no password. I would like to change it so that the administrator has a password. When I go to User Accounts then Manage Accounts there is nothing I can click on that will give any more responses.
View 2 Replies View RelatedI finally got Windows 8.1 on the system, but its super slow on my 840 evo, I have herd that there issue with upgrading from 8 to 8.1 and the account runs slow, but it isnt that, applications like Chrome are really slow to load up, Also web pages seem slower this time, I dont want to move from Windows 8.1 due to battery life,
View 8 Replies View RelatedCan I change or delete the Administrator Password? If so, how do I do it?
View 1 Replies View RelatedI have a 2-month-old Dell Inspiron 15 notebook running Windows 8.0, and trying to upgrade to 8.1. I have plenty of HD space and 4GB memory. I have 2 user accounts, one with admin designation. I want to change the admin to the other, but I cannot. When I try to change the user accounts, I get a message requiring the account with admin to OK any changes.
When I enter that account's password, I get a message that the password is incorrect. I changed the password in the "reset password" site online, but that password doesn't work in the change users part of the PC. So I am stuck. Right now, I cannot affect any changes to the system, because that requires the OK of the admin user account, and that in turn requires a password, which seems not to match the password that I entered for that account.
I have an administrator account created for Window 8.
How do i manage the Pop up for UAC? Everytime i run app/install app, it asks for username and password for admin. But i am sure, the account is an admin account?
How come come administrator account can change the password of the LOCAL ADMINISTRATOR account (default admin)?
I have gone into the control panel and tried changing the screen brightness but nothing seems to work. I am the system administer so I should be able to set all changes.
View 4 Replies View RelatedWhen I set up my computer, I accidentally made a typo in my email address. I'm trying to download some Microsoft software from the internet and this typo is causing me dramas because it's not a real email address and I can't go any further with downloads without verifying the email address by accessing a verification email in an email address that doesn't exist!!! Confused? Yup, me too.
It seems like such a simple thing but I cannot find a way to go back and change the administrator email address. I can't find an option to do so in account users. I have made a new account user using my real email address but... I just keep hitting brick walls.
I have win 8 when running apps in "run as administrator" and when running most of apps, windows give me this message:
"
do you want to allow the following program to make changes to this computer?
.
.
.
to continue, type an administrator, password and click yes.
"
but yes button in deactive and there is not any password field to fill it.
I dont know in which type is my user account ?? standard or administrator?now I can't do many of actions in windows for this reason and can't enable administrator account and switch to it.
i did it on my laptop without putting my ms account on installation but now ive put it
View 6 Replies View RelatedI just got a hold of a laptop thats using 8.1. It acutally came with it, but I'm viewing that as a good thing, so I can get some experience with this OS. My questions is a simple one, is there any way to hid either your last name, or your username when logging into 8.1?
I'm not a big fan of my last name being displayed when I lock my computer, or log into it. I don't mind having on my microsoft account, I'd just rather it only show my first name.
When I created my User Account I named my Self Jack B..... (end of last name) It showed as JackB_000 for some reason, I thought it was because my Account name was to long. So I changed my full name into just my first name, the user account stayed the same, only changing to what I set in Metro and Start8 (Start8 is an alternative to Metro bringing back the start bar).
View 1 Replies View RelatedI do not want to use a Hotmail.com or any similar MS account to create a Windows 8 account but my own user name and password to logon. How to do it?
View 9 Replies View RelatedI changed my username following the following guide ( microsoft account - How to rename user folder in Windows 8? - Super User ). Everything has worked fine so far apart for the the desktop version of Windows Update. My knowledge is pretty low about this things but for me it's weird that I can access the metro version of the Updater but I cannot access the desktop version. I receive this error -> View image: 2014 05 05 11 02 36 C Users user App Data Local
View 4 Replies View RelatedI have two Onedrive folders under my User files. One is uploaded to the cloud the other appears to do nothing. I started using 32 bit Windows 8.1 on the same machine then installed the 64 bit using the same microsoft username/email. Is it possible to determine which Onedrive folder is active and get rid of the other without losing any files both offline and online?
View 2 Replies View RelatedI have four computers running Windows 8.1
On three the User Accounts dialog box has the phrase, "Users must enter a user name and password to use this computer." I have deselected that box and entered the passwords and now I log in automatically.
But on one computer in the User Accounts dialog box there is no phrase, "Users must enter..." and there is not box to deselect.
My Internet Explorer is keep on asking for the User Name and Password.
Steps Taken :
1) Deleted the cookies and deleted the temp files too.
2) Reset the Browser and disabled all the Add-on's
3) Uninstalled and installed the IE.
Same URL is working in other browser's ( Chrome , Firefox )...
I have recently set up a Win 8.1 notebook and from a cold boot Win comes up with a confusion by showing part of my email address as user (a hangover from a MS account) but, after saying that the username is incorrect, then allows me to enter my local account / network creds.
I decided that, since the machine could go on the road from time to time, I would reintroduce the need for username and password. I would like to tidy up this mixed-up situation by having to enter my local account details and not have this 'error' message from dear old MS pop up. Having part of my email address appear on bootup is hardly useful in terms of security.
I had recently activated my Administrator's account on Windows 8. But I was tired of having to put in the password each time and I made it where it would bypass that by hitting the windows key plus the x key then clicking on the Command Prompt (Admin). I put in "control userpasswords2" and hit 'enter', then I unticked the box that says "Users must enter username and password to use this computer" then click apply and restarted my computer.
I need more privacy on my computer and I want to have it where people have to sign in with the user name and password to use my computer. But when I do all the same things and tick the box again that says users have to use the username and password etc... it doesn't seem to work. It still doesn't require my username and password.
My friend has Win 8 64-bit installed via his assembler.
In his C: drive (OS drive)..it shows as C:UserHome..unlike mine one which is C:UserTroy <my name>
He wants his user name to replace the "Home" user.
How to achieve this and hope this will not impact the already installed progs?
I like to make my own custom Username for any Windows installation. However, Windows 8.1 Pro will simply create a Username for me based on my Microsoft account and that Username is just not tidy enough for me with dashes and not something cool and it doesn't ask me whether I want to type one up myself. The only way I found to prevent that from happening is disconnecting from the internet or disabling NIC in BIOS. Is there another way of doing so?
View 5 Replies View RelatedI had a new Windows 8.1 Pro system installed. Was able to logon to it with no problem. The computer name was OWNER. Changed it to what my previous computer was named. Now during startup the Admin logon gives the following message:
The user name or password is incorrect. Try again.
When I click on 'OK' I'm presented with a signon screen with Admin as the user name. No password that I enter works. When I lookup the signon accounts Admin is NOT one of them.
Listed the user accounts and found the following item for Admin:
AccountType=512
Description=
Disabled=FALSE
Domain=JAMESGATEWAY-PC
FullName=JAMES FLETCHER
InstallDate=
LocalAccount=TRUE
Lockout=FALSE
Name=Admin
PasswordChangeable=TRUE
PasswordExpires=FALSE
PasswordRequired=FALSE
SID=S-1-5-21-1214041905-3759206490-3728594358-1001
SIDType=1
Status=OK
While trying to share folders and files not within a homegroup, but with workgroup, I create 2 same accounts on my desktop pc and my notebook that have windows 8 installed on them. Then I share folders and when accessing dtPC or notebook windows does not ask for a password, just opens the files under the network group. However when i start windows and try to access shared folders right away, it gives me the message that the path was not found. Only a while after that it gives me the access.
If I try to do the same thing but with the notebook what has windows 7 installed it asks me for a password and username as expected and everything goes well.
Why can't I make windows 8 ask for credentials while trying to reach another pc with windows 8.
before installing any program or uninstalling in my system, my windows should prompt me to enter my password. How do I do this, using windows 8
View 3 Replies View Relatedis there an option to set default launching mode for all applications including any installed in future to run as administrator (identical to selecting Run as administrator from context menu)?
Although I can set up this permanently for an existing executable or shortcut, this is hardly possible doing for any installed program. I know this was possible somehow under Windows 7, all programs launch with admin rights and the superfluous option was removed from context menu.
I know of the basic way to make a program run as an admin (rightclick, Properties -> Compatibility - > Run this program as an administrator)
Prob I have found out, If I put the .exe on another site for someone to download, when they download it to their PC, or if I just simply move the .EXE to another part of the PC, the admin rights are taken off.
If there a way to keep the "Always run as an administrator" on there at all times.