When installing my Windows 8, I put the PC name as "Usmaan" and the account name as "UsSy" but after the installation and having used the laptop a bit more.. I changed the account name to "Usmaan".
The problem which I have is that although the account name has changed to "Usmaan", I still see the name "UsSy" every now and then when doing some development or when I for example check the path of files.. it will says C:...UsSy...file.txt
I should also state that when I was installing Windows 8, I tried specifying the account name as "Usmaan" but it complained that I cannot have the PC Name and and the account name the same.... hence why I put it as UsSy.
How do I change the UsSy name to Usmaan permanently?
Just got a new laptop with windows 8, not familiar at all with the OS, but accidentally misspelled the account name. Obviously, this has little impact on functionality, but I would like to change the name so any files I have from my other computer get put in the proper location without having to correct the username typo when switching back and forth. Basically, how can I go about changing the account name on my computer. There are no other users, I just set it up today.
Bought a new laptop for my daughter with win 8 and got it set up. Being the newbie I am, every time my daughter starts her laptop my name appears on the user account. She wants thi changed. How I change the name of the user account. This is the only account on the laptop and it has administrator status (I did however get name of computer right) ?
I have a 2-month-old Dell Inspiron 15 notebook running Windows 8.0, and trying to upgrade to 8.1. I have plenty of HD space and 4GB memory. I have 2 user accounts, one with admin designation. I want to change the admin to the other, but I cannot. When I try to change the user accounts, I get a message requiring the account with admin to OK any changes.
When I enter that account's password, I get a message that the password is incorrect. I changed the password in the "reset password" site online, but that password doesn't work in the change users part of the PC. So I am stuck. Right now, I cannot affect any changes to the system, because that requires the OK of the admin user account, and that in turn requires a password, which seems not to match the password that I entered for that account.
I'm wanting to change the email address I use to log on to my system. Is there an easy way to do this or do I need to back up all my files and move them over to a new account?
When I installed Windows 8 I didn't use a Microsoft account, but to use Skydrive, I had to connect, and when I did this, it changed my username, is it possible to change my username instead of using my Microsoft.com account's name?
I recently sold my Gateway laptop and the Windows 8 software was already installed with purchase. I want to remove my info and myself as the primary user in windows 8 so the new owner can set themselves up. I tried on my own to figure out and was only able to set up a separate "User" for the new owner until we can resolve.
In this screenshot you can see what pops up every time this new user logs in to our local network domain. The server name is "goodbuddy" on "TRUCKERSREPORT" domain and it seems to be running some kind of setup right at login every time. I don't want to allow this user admin rights for program changes, but i need to make it so an administrator doesn't have to enter their credentials in this every time this user logs into their computer.
My Windows 8.1 machine has only one interactive account - the built-in "administrator" account. It is just an internal file- and media-server without a monitor, which is accessed exclusively through Remote Desktop.
I would like to change the "user picture" associated with that built-in admin account. Trying to do it the "usual" way - through Control Panel -> User Accounts - does not work. Apparently, user picture selection is handled by a Metro app. And Metro apps are not launchable from the built-in admin.
Most likely there are workarounds. I can try using that hack that enables Metro apps under the built-in admin. Or I can add another interactive admin account and try changing the picture of the built-in admin from that other admin. I don't know whether any of these will work, I haven't tried yet.
But is there a more straightforward way to set the user picture for an account? Like copy the picture file to some folder or something like that?
Is my windows corrupted. I cannot change or add or turn on guest account in windows 8. when I click on manage on account nothing happens. and when i click pc setting from the charm the user tab is not there. what happen fix this issue whithout resetting windows..
HP laptop with Windows 8.1 updated. I want to change my log in email and still keep everything I have in that account. Setting up an alias starts a new account and I would have to reinstall everything I already have installed. Is it possible to do to just change the email addie and keep everything?
I got this error message "Setting the account picture failed, please try again". I need to know how to fix this, i got this error after i browsed the pic i wanted to use.
Here's the screenshot, I'm not using a pirated copy of this OS.
I have a friend who keeps getting borderline malware (e.g. browser toolbars) installed on his computer. There is even an active antivirus on his pc (I believe norton). It comes with his new pc and is valid for 1 year.
After I clean his pc, if I change his account type from administrator to limited user, it should prevent any toolbars from installing, right?
Would this break any software or cause any file to become inaccessible?
When setting up Windows 8 64-bit Pro on the page titled "Sign in to your PC" I choose the sign into my Microsoft account as opposed to "Sign in without Microsoft Account". Big mistake. It created a username called dwmad_000 which is part of my email address used for that Microsoft account.
To amend this username to one of choice, I changed the name in my online Microsoft account and also from C.Panel created a local account. I now have both in Windows Explorer but the default one is always dwmad_000.
How to get rid of dwmad_000 or change it permanently to First Name Last Name and sycn the 2.
I have win 8 when running apps in "run as administrator" and when running most of apps, windows give me this message:
" do you want to allow the following program to make changes to this computer? . . . to continue, type an administrator, password and click yes. "
but yes button in deactive and there is not any password field to fill it.
I dont know in which type is my user account ?? standard or administrator?now I can't do many of actions in windows for this reason and can't enable administrator account and switch to it.
how to change my account type back to administrator but with no luck.
I have been running this laptop as my main machine for a few months now with no problems, however, I realised I had a problem when I wanted to change some networking settings on Friday when the UAC said I needed admin privileges and wouldn't let me enter a password or click "Yes", hence not allowing me to go any further.
I went to control panel > User accounts and saw my account type has been changed to Guest.
Now I have thought long and hard and I have not changed or had any need to change my account type to guest, nor has anyone else had access to my laptop, so I can only assume this has been done in the last week or so during a Windows update.
I'll tell you what I did to try to resolve this below:
First of all I tried to enable the hidden administrator account while in my account by running command prompt as admin (and then entering net user Administrator /active:yes) but as I don't have admin privileges I couldn't even open the command prompt so I couldn't get any further.
After reading around the net and this forum I found this thread and gave it a try. After restarting the laptop and booting into safe mode I was expecting to see and Administrator account next to my account at the log in screen, however, there was only the administrator account to choose from, so I clicked it and it went through the first time initialisation of the account and then showed me the start menu, I then went to run the command prompt as admin and it worked, I entered net user Administrator /active:yes which worked with no problems. I then went to the user accounts in control panel to "Manage other accounts" but my usual account was nowhere to be found. So I thought I'd restart the laptop and see what happens out of safe mode.
When it restarted I was still only presented with the admin account, so I logged in to disable the hidden by entering net user Administrator /active:no in the command prompt run as admin and then restarted.
After restarting again I was expecting to see my account but was still presented with only the admin account, but when I clicked on it it said it was disabled and I was completely locked out of windows.
Luckily I created a restore point so I managed to restore my settings, and was back at square one.
After a bit of testing it seems my main user account is being removed when I enter safe mode, but do nothing else. Why entering safe mode is removing my account.
I am at a bit of a loss as I can't seem to activate admin privileges on my account, but if i try to fix it I lose my account completely.
I bought a shiny new laptop yesterday with windows 8 pre-installed. After setting a few things up, i restarted the computer for the first time. At this time the computer downloaded many updates. On start up since my user account has been downgraded to a guest account. This is the only account on the computer, as such i do not have administrator rights and i am unable to log in as an administrator.
May I have to restore the computer back to factory settings but how to do this without being the administrator.
I am a system administrator in a large enterprise environment and we are doing a rollout of Windows 8.1. In our image capture we somehow captured a setting that is disabling users from setting up a connected account with their domain account. I am relatively sure that it is in my unattend and I can fix it for machines going forward but I really don't want to have to reimage the machines I've already deployed.
When I go to connect an account, the "connect to a Microsoft account" option is grayed out and the "some settings are managed by your administrator" message is displayed at the top. This is NOT a group policy object that is applying. The machines are in a test OU and there is absolutely no policy applied. I have searched all through local policy and even did a search through the registry for "account" (that took forever) but have been unable to find any registry key or local policy that would be causing this issue.
What setting might be causing this? I have 30+ machines already out in the environment and the user experience is going to be terrible if I have to reimage them all.
How can I connect my hotmail account to my Windows account? I have connected that mail to my account on previous installation. My OS is Windows 8 Enterprise x64.
How to correct user accounts in windows 8 Pro on new HP Pavilion g7 2246nr, I set notebook up using Microsoft account then called Microsoft when problems started, and we decided to switched to a local account. They created a new user account, then copied all my files to it. But I ended up with i administrator account that could not be deleted. That worked but my files are broken up between 3 other user accounts. I spoke with Microsoft to try and consolidate the accounts and they used a command line in cmd, run as an administrator, but it did not finish, or I may have cut it off by accident.
I am still working with the system but it has problems. I have reloaded the software 3 times so for. How to correct the problem without reloading all the software again? Also after setting up sharepoint in Office Pro Plus, it created another administrator account in UAC. I did not think this was going to happen? Right now in the UAC I have two administrator accounts with the sane name, In c:users there 5 with the temp file they created. What that command line they attempted to use was to correct and consolidate the user accounts.
How to correct the problem without reloading all the software again.
I have a user with a machine that was setup with Win 8.1 Home. The machine has been upgraded to 8.1 Pro and joined to a domain (WinSrv 2003). I need to get the content/configuration from their old local machine user profile to their new domain user profile.
I tried to copy the contents of their ../users/<name>/.. folder from the local user profile to the new domain user profile (after they had logged in once, and then logged off). This did not work. When I did the copy, I grabbed all files, including hidden...was that my mistake, or is the issue broader?
In the end....they want their old stuff and configuration under their new credentials/profile.
My PC is running win 8.1. The problem is I can't change my user account password. Whenever I try to change, I get this error: error.jpg
At the same time, I can't open Apps that require my password - such as Skype, People, Mail. But however, other Apps like Weather, Maps, Travel are running good. Is there a way to fix this?
this is a known issue and may users have been facing exactly the same problem with Windows 8 (source: Google)
Problem: I can't change my User Account picture. Whenever I click on the "Browse" button, nothing happens. Same goes for whenever I try to change the Lock Screen.
I read somewhere CCleaner removes some essential shortcuts which can prevent that, but I don't see that being the case coz I restored all the icons and even ran "sfc /scannow" just to be sure of that.
I have an administrator account created for Window 8.
How do i manage the Pop up for UAC? Everytime i run app/install app, it asks for username and password for admin. But i am sure, the account is an admin account?
How come come administrator account can change the password of the LOCAL ADMINISTRATOR account (default admin)?
yesterday I tried to disable User account in W8.1 pro rtm version WZT,after windows restart and I tried to Enable back change user account control settings can not be clicked again,I've tried a few click nothing at all resfone VR1ULKy.png
Yesterday I received and opened up new laptop with Windows 8. Without realizing what it was, I set up and then closed my Windows account. I realize now I need to keep it open. How to reopen the account?
I have just enabled the Guest account on my laptop with the idea that it is completely secure from my account but it isn't really working for me. It seems to act as any other account and remembers details of the previous log-on.
Is there some way I can allow a Guest user to access internet, print (and nothing else really but it doesn't matter) and then after they have finished whatever they have done is destroyed so next time there is nothing in downloads, nothing on desktop, no preferences or log-ins saved in browsers etc. Like the temporary profile you get on occasion.
Can I Remove User Accounts in Windows 8? - Windows 8 -
This is pretty insane because all I had to do was enter an email address; no name, no password, nothing. Now, all I have is an email address, and of course no name and no password. So, exactly how am I supposed to enter a name and password din SQL server, for the security to work, or whatever, when these things don't exist, and there's no way to create them.
I've been working on this project for weeks now, simply because every time I need to do something, I literally can't do what I need to do.
The REAL problem is that I have to use SQL Server to login to Windows. My Windows 8 works fine, and my SQL Server works fine, but they won't work together. That's the entire problem that I'm dealing with.
I'm having a problem setting up a PIN code to logon to Windows 8.1
I've linked mine and my partners MS accounts to Windows and as we use password generated passwords consisting of random characters, numbers etc, it would be so much easier to just use a PIN to logon to the computer. However, every time I click the option to 'Add' under PIN in the Sign-in options page of PC Settings, nothing happens. The cursor busy icon flickers but no new menus or options appear and I'm ultimately unable to access the settings.
I've tried logging off/on, rebooting and restart the credentials manager service but there's no change.
More info...
After clicking Add on the sign-in options page, I'm seeing quite a few of the following errors logged in the Application log: Faulting application name: CredentialUIBroker.exe, version: 6.3.9600.16384, time stamp: 0x5215f313 Faulting module name: DUI70.dll, version: 6.3.9600.17031, time stamp: 0x53086a1c Exception code: 0xc0000005 Fault offset: 0x000000000000277d Faulting process id: 0x110c Faulting application start time: 0x01cf5b36ca94bed5 Faulting application path: C:WindowsSystem32CredentialUIBroker.exe Faulting module path: C:Windowssystem32DUI70.dll Report Id: 084f9905-c72a-11e3-8270-c05ffa3ee80b Faulting package full name: Faulting package-relative application ID:
I've tried booting into Safe Mode with Networking and this time I see an error box appear.
It's not too useful though.
Windows Security Create a PIN First, verify your account info. The server threw an exception.
So I was selling my computer to my grandmother, and my dad took it over to her house to set it up. He somehow managed to completely lock everything down. He created an account for her, but we never once were able to log into it. But he also deactivated me as an administrator.
So now I have my computer back, and I am trying to set up the accounts, but I cannot do anything as I am no longer an admin. From what I have gathered, im up the creek without a paddle!
How do I create an administrator account without an admin accoutn already in place?
