I'm trying to debug a slow shutdown on my laptop with an SSD.I've done the msconfig to so non-microsoft services and other startups do not start at boot but this doesn't make a big difference.One thing is that although the shutdown takes 2 minutes, and the disk activity light is pinned solid in those 2 minutes, so something is going on, I can't seem to figure out how to get information about what is going on. The big problem is that 7 seconds after the shutdown command, the event log service shuts down. After that point there are no log entries.Is there a way to configure the event log service so that it doesn't stop right after the shutdown command?If there were log entries this would probably be quick debugging.Also while I am at it, here are my theories for what is going on (1) the disk is busy in those 2 minutes doing some sort of registry backup, or (2) also running through a journaling file system log to update disk blocks to a consistent state, or (3) or running the search indexer.What does Windows 7 do to the disks when it is shutting down?
I have a ASUS Laptop with Intel I3 processer and Windows 7 Home Premium. I recently had a forced shutdown during a Windows upgrade session. Ever since then the Boot and Shutdown times have increased to over 15 minutes. I have run the msconfig unticking all but the antivirus (Kaspersky) and it still takes >15 min to boot and Shutdown. Is there something I can do before I decide to reinstall Windows &. (I dont have a install disk.) The software came with the Computer and I have the OEM code (Bought at Best Buy)
I bought this computer with Windows 7 since about 8 months. Within the last two months ago, shutdown process has become very slow. It's take 1-2 minutes every time. Startup time seems normal.I have now licensed kaspersky Internet Security and Comodo free Firewall (Does this affect?)The operating system updates have automatically installing since the beginning of my use.Most of my use is surfing the Internet and web design programs.Asus A52F with 3gb memory.
Occasionally shutting down my computer may take thirty seconds longer than normal(which is 10 seconds). All the peripherals shut down, but the computer keeps "shutting down" for 30 more seconds. Normally peripherals shut down just a second or two before the computer itself shuts down, but here the shutdown is just really delayed.
i have windows 7 ultimate, I am now facing some wierd problem from last week when my expansion drive 500gb Seagate is connected computer takes too long time to shutdown. But i don't why my drive to be disconnected during shutdown
considerably slow on start up, shut down, loading and commands. scanned avg antivirus, malwarebytes & superantispyware which showed no threats; also ran ccleaner & defrag.
my laptop has recently started booting up and shuting down pretty slow, it takes about 3 mins to start up, and shutdown, but when it boots up, it runs perfectly. It yous to only take a few seconds. i'm not very knowledgeable about computer details, so if you need them, where do i find them? I do know i'm running Windows 7 and have Intel core i3. I run mcafee virus scan everyday, defrag and clean my disk everyday.
I went to restart after installing updates, and system was very slow to shut down, and very slow to start. I did run house call, and came up clean, also ran this one you download, but I can't find the shortcut to it, it was about 100 MB, the name was Kaspersky Virus Removal Tool, but came up clean as well.I did not time the shutdown yet, but did time the start up. If it matters it was broken down like this. It said "press escape for start up screen" for 40 seconds. Then "starting Windows" for 3 minuets.Then it said "welcome" for 40 seconds, Then a Black screen for 3 minuets. Then I got my desktop and start up sound. I was reading on line, where after a up date, something sometimes gets changed in the registry, where you have to change the Value from "1" back to "0" But that was OK. It was already at "0".I am trying to find the name of it, but of course I can not right now. Think it was "clear page file "I just now went to msconfig and the only thing new that was added was McAfee to start up, but I took it out of start up. I also have it disabled in my add ons (Firefox).Don't know if that could have been an issue, have not tried to shut down/restart yet. I have not installed any new hardware. I did put new batteries in my wireless mouse, that I don't use often. I am going to try and run CC cleaner next I guess.
I have recently started experiencing abnormally slow shutdowns (it will go to the windows login screen with the shutting down message and hang there for about ~5 minutes), and random freezes on my PC. The freezes happen from things as small as moving the mouse. I run a weekly virus scan, and have come up with no viruses, though it could be something not detected by my antivirus.
The PC is less then 2 years old.
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Professional , Service Pack 1, 64 bit Processor: AMD Phenom(tm) II X6 1090T Processor, AMD64 Family 16 Model 10 Stepping 0
This is something I have seen occur multiple times in 17 years of using windows, after a unexpected shutdown windows i/o performance slows right down and I still dont have the answer to it.
Today I accidently cut the power to my pc, so windows didnt crash it just lost power.
Windows took about twice as long to boot. After it had booted the system hdd was very busy doing I dont know why (wasnt superfetch or virus scanning). The i/o was used by the system process. Outlook took a looooong time to open. it then also took a very long time to close deleting the deleted emails which are usually way faster. Internet explorer took about 2 minutes to restore crashed tabs which was massive disk i/o. Opening tiny apps where the hdd light either flashes very briefly or doesnt come on at all have a noticeable 1-2 sec delay with the light on solid.
I expect after a manual defrag things will be back to normal. Dos all the prefetch data get trashed on a unexpected shutdown or something?
yesterday i was put my computer(HP Pavillion 6) into sleep mode it was working perfectly fun and i tried to wake it back up i moved the mouse and nothing happened so i did a hard shutdown i turn it back on and apparently windows 7 couldn't be loaded so i tried to do a system repair and restore to a previous point neither of those methods worked so i shut it down again and it loaded up just fine but now it takes an extreme amount of time to load up past the log in screen first the desktop is black and the toolbar shows up after a long time and then the background and programs on the desktop show up then i can use the desktop again but it takes a very long time to load up any programs and freezes alot as well what could have happened after the hard shutdown?
specs are im getting all this info right off the system info)
Processor: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00 GHZ 2.00GHz Installed memory(RAM): 3.00GB Sytem type: 64-bit operating system Hard drive - 80GB Motherboard: Desktop board media series intel DG33TL
I just clean installed windows 7 ultimate 64-bit i have tried 32 bit as well but i have had no difference in booting up i did not install anything yet as the boot up is very slow i have tried different hard-drive as well i have 2 80 GB hard drives one is maxtor and one is WD both are IDE...i disconnected everything extra that i had on my comp like Nvidia Geforce GTX 460 video CARD using on board video card i had a wireless card installed took that ooff as well took off the extra fans i had. Previously i had windows xp installed and it working very smooth so i have no clue what can it be as there is no virus before i installed it i had cleaned it up and installed it clean.
I just installed a retail copy of win 7 on my laptop and have been experiencing some issues. At first everything worked fine but out of the blue my desktop/folders have not been auto-refreshing. Whenever I try to delete or create a new folder I have to manually refresh to the folder in order to view it. When shutting down my laptop it takes 5+ minutes and when my desktop is loading after booting up the laptop it takes several minutes for everything to load and for the win 7 chime.
Finally, it won't allow me to update. When I try to use the windows updater it hangs for a while on "creating restoring point" (which may be normal) but then permanently hangs on installing update 1/16 at 0%. If I try canceling the update nothing happens and even when I try to shut down the laptop it attempts to install the updates but hangs on update 1/16.
From researching these issues I've realized that the auto-refresh problem is not uncommon and has something to do with a network. This may be unrelated but these problems only started to occur when I was transferring pictures via a USB stick.
i've just installed a new software called commview for wifi, it has a problem in slow capturing packets for a specific SSID & it stops at a certain amount of packets (10,000). I contacted their support & tried some solutins, at last they asked me to run it in debug mode & send them the log file, i'm not sure how to do it but i googled, when i try any command from the cmd it gives me that it isn't recognized as an internal or external command, operable program or patch file.
The problem is that when ill start my windows coming up some debug error and i dont know how to fix this. It comes up with notepad file windows will start and popup out.
i am using win 7 64 bit, i am getting this error though i am the program as administrator account.
Answer:-
Have you attempted to right click the install file for the application and select "properties," chose the "compatibility" tab and check mark the box "Run this program as an administrator?"
Also, Microsoft does have an official Windows 7 Support Forum located here:-
I am trying to install the software where I can be able to read the minidump files after the BSOD. I found info from google and downloaded Windows Development Kits 7.1 for Windows 7 Pro x64. After I have complete the installation including debugging tools.Now when I run the windbg.exe program, I receive a "windbg.exe - bad image error" saying:"C:Program filesDebugging Tools for Windows (x64)dbghelp.dll is either not designed to run on windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."I did uninstall then reinstall the software but receiving same errors.
I have for the last day had a notepad debug when starting my computer and getting to the desktop. I have no idea of how the debug has happened, or what it is or anything like that.
[1018/091835:ERROR:backend_impl.cc(2086)] Corrupt Index file [1018/091835:ERROR:cache_util_win.cc(43)] Unable to move the cache: 5 [1018/091835:ERROR:backend_impl.cc(134)] Unable to move cache folder
The last BSOD seen was at around 10:00 this morning (may have been earlier as the machine was found with a blue screen...), the problem I have at the moment is that the PC is not creating dump files - I have checked the settings (screen shot included) but it still won't create them.I have uploaded the output of the utilities as per the 'BSOD Assistance' posting?
When doing a disk cleanup I noticed that the items suggested for deletion included Debug Dump Files and System Error Memory Dump Files. Both were exactly the same size (>350MB), which makes me wonder if one is a duplicate of the other. It's a fairly new computer which has only had one BSOD, and I knew about the memory dump and minidump files and where to find them. However, I can't find the Debug Dump File, nor do I know why it needs to be there as well as the memory dump. Also, if there is another BSOD, will the Debug Dump File be overwritten like the memory dump file is, or will I accumulate more of these rather large files?
I have two windows updates that keep failing. When i go to shutdown my computer I always have an update icon attached to the shutdown key. The download is always 1of1. Then when i reboot, the update icon is still there. I'm thinking since the two updates are failing, it has something to do with the 1of1 update not downloading properly. I went to windows update to check for new updates, and the only one is the two that keep failing. My computer just blue screened on shutdown today, winch got me thinking i really need to fix this.
Im not sure if this is in the right category, but I think it could be Windows 7 related.My Powersupply died the other day so I purchased a new one and all was fine, except when I shutdown it either freezes or carries on for what seems like forever.The only thing is that on bootup my DVD Drive and SSD have changed ports so my dvd drive is now device00 and my SSD001.
I bought this Fujitsu laptop for less than a year. Its only for my school work. It takes forever to bootup, startup and it sometime hangs when I open up a program or typing.For the bootup, it takes very long time on the window logo, after that the black screen, followed by the welcome page with the loading cursor. Each of this process take a long time. For startup, its not so long but its still quite lag. For the opening up of program and typing, everytime I open up my visual studio, it will take a long time to show up and even if it showed up, it will be "not responding".So I will have to open it a second time before I can start using itWhen I am typing my codes, it will randomly hang and show that the program is not responding. I am still able to move my cursor though.
