Ok so I was trying to install dell quickset which doesn't work no matter what I do since I upgraded to 8gb or ram and installed a ssd. The main problem is I don't have the pagefile turned on so windows won't boot and safe mode boots but only has 240MB of ram and it so full you can't run anything.I have no system restore points. All I need to do is undo the max memory setting. Tried last known config, running msconfig in safe mode, bcdedit.
I have a videoediting software that I am runing on 32 bit Windows 7 with 4 Gb RAM, the company that makes the software suggests to set the Virtual Memory/PageFile Size to double the RAM amount.I looked and mine is set to auto, I have many drives and all say none and are grayed out under paging file size for each drive. Which drive should I double the paging file ? the drive the software is installed on ? what about all my other drives, once I take it off auto they will not be managed. Should I set them all to double the RAM and if so how will it affect my system?
I have a dell dimension 9200 and the motherboard can handle a maximum of 4gb of ram, but is there a limit per slot? In other words does it have to be 4 x 1gb sticks of ram or can I use 2 x 2gb sticks? The reason I ask is that I've had lots of bsod and crashes recently and after performing lots of tests using memtest it seems that 2 of the ram slots on my motherboard are bad meaning I only have 2 good ones to use.
just have a simple question here, is the maximum amount of ram memory determind by motherboard hardware or by os? one website said win 7 64 bit home premium can have up to 16g and if you go ram website to test how many can you have , it say only 8g. so which one is true and why?
I'm running Windows 7 x64 with a Quad Core and 4GB of RAM. I've enabled Readyboost on two USB devices of 2GB each I had laying around: a SanDisk Cruzer Micro, random read speed is 5341 KB/sec, random write speed is 3068 KB/sec. And a Kingston FCR-HS219, random read speed is 3412 KB/sec, random write speed is 3739 KB/sec. Not much, but should suffice to give it a try.
While booting, I saw and improvement. But the thing is I have my computer on 24/7 so I don't care that much about boot time. And I don't see a lot of activity of these devices once is turned on. Specially over the pendrive.
Is it because I have > 2GB RAM? Or is it because they are too small?
Would I benefit if I create a pagefile over one of these devices instead of Readyboost?
How can I "measure" this?
Is there a guide regarding Readyboost and USB devices?
I heard that the pagefile uses a lot of space on the ssd and they were right, I reduced it to 800-900mb on my C drive and kept it at system managed on secondary drive. What is the recommended minimum page file size? I have win 7 ultimate x64, 16 gigs ram and my C drive is a 240 GB Kingston HyperX 3k
I don't fully understand how all this works yet, and I'm not sure if I can disable this and still expect it to run smoothly! Some places I looked said that with anything over 4gb of ram, I really wouldn't need it, but others said keep it for sure..
I was wondering what's a good size for a Windows 7 pagefile partition? I have Windows 7 installed on my primary drive (OS) and decided to make a 7GB pagefile partition on my secondary drive as I heard it is better to have the pagefile on a different hard drive. I have 6GB of memory installed if it makes any difference.
Is 7GB enough? I noticed the partition already gets filled up so I had to disable that annoying "hard drive disk space is low" balloon notifications that kept popping up.. people are getting away with having no pagefile so I figured 7GB would be more than enough?
I should add that I am not experiencing any blue screens of death or any problems despite the notifications popping up.
Ever since I changed my RAM modules, Windows always allocated more space to the pagefile. When I had 4GB of RAM, the advised size of the pagefile by Windows was 6GB. I now have 8GB of RAM and Windows recommended size for the PF is 12GB. So I set a fixed size of 12GB for the PF and didn't let Windows manage the file by itself. I'm about to get 4x 4GB of RAM for a total of 16GB. And I think it would be really exaggerated to allocate 16GBx1.5=24GB for the pagefile, especially because my system is on a 60GB SSD.
I want to keep a pagefile so please don't advise me to disable it. This is my workstation and believe me I will use all of the 16GB of RAM. My question is: what is the size I should give to the pagefile to avoid any problem (like app crashes)? Is there a way to see in Windows how much MB or GB is currently used by the pagefile? --> That would be a good way to assess my needs.
how much ram I would need to buy to turn off the windows virtual memory? And should I buy ECC or non registered memory? Would 8 gigs of dual channel memory be enough? Also,is it ago to have to sets of dual channel memory (4 x 2 gigs DDR3-1600mhz)?
I run Windows 7-64 bit Home Premium and work on encrypted containers with TrueCrypt. I'm afraid that such sensitive information (including passwords) may be unencrypted on pagefile.sys or hiberfile.sys. How can I securely delete both of these files? I know there's a method in Windows 7 to delete pagefile.sys at shutdown but I heard from different sources on the net, this is unreliable and does not in fact SECURELY delete the content inside pagefile.sys.
My biggest folders are seemingly Network Service and AppData. My OS is on an SSD with 60GB, I have another 1TB SATA and a second 60GB SSD as well. If I were to create these two folders in the second SSD, and make them point there, would this cause any issues? I am trying to re-enable my pagefile because it is currently set to 16MB and I can't create a full memory dump unless I set it back to the original 8GB. I only have 4GB free on my SSD, and it is not enough. The other SSD is empty and entirely available.
I bought a PC with a quad-core system with 16Gb RAM, a 128Gb SSD C: drive and a fast 1Tb D: drive. I just discovered that I have an 18Gb C:pagefile.sys and started wondering about the pros and cons of having this paging file on my SSD C: drive. Given that I have 16Gb RAM, I could probably get away with no page file at all. I could certainly manage with the pagefile entirely on the "traditional" D: drive. Are there any guidelines on pagefile placement in the SSD era?
I had an additional Windows installation for testing purposes, on a different partition and now I want to delete everything associated with it because I need some free space.
Although I managed to take ownership and delete the Windows folder and few others, I can't delete System Volume Information and the pagefile.sys file.
System Volume Information - I can't get "ownership" of the files in the directory. Although I'm listed as an "owner" of the directory with "full control", when I check "Replace owner on subcontainer and objectes" I get "Access is denied" and then "Stopping propagation of the owner leads to an inconsistent state..." I think I came across this before, but I have no idea what to do. I also get "access denied" when I try to change the read-only attribute of the directory.
pagefile.sys - when I right click on it, the security tab says "The requested security information is wither unavailable or can't be displayed"
In my first partition I have windows xp, and in the second partition windows 7.Is it safe to use only one swap / pagefile from only one partition (first one where resides windows xp)?My pagefile size is set to be in the first partition and at fixed size (minimum 4096 Mb maximum 4096 mb).Or should I make/move/user a swap file from the second partition (windows 7 partition). Far as I know from my benchmarks the hardisk is faster in the first partition (first 20 GB), that would be the xp partition, fast in the second one (from 20 to 50 gb) after this the speed is decreasing.I am using windows xp because Photoshop and some games seem's to be far more resposive and faster than in windows 7, and I use windows 7 for internet related & other stuff
I'm trying to optimize performace of my SSDs.Can I move Pagefile, TEMP and TMP files to my Ramdisk? I already moved interenet cache.I have 32GB of memory available and an 8GB ramdisk. Memory allocated to ramdisk is dynamically managed by software (Primo Ramdisk Ultimate) so only the used portion is used and not the full 8GB.
How can I stop Windows from swapping the VirtualBox application's memory to disk when it's idle? It's a performance issue when my guest OS looks for data and it's not available - also since it makes use of its own sawp partition.
I recently had a problem with reformatting a partition. It was solved by relocating the pagefile.sys.
Now whenever I boot upon login it says the system has made a temp pagefile system. I try adjusting the size of the pagefile system to much more, less, or equal to amount of ram (4gb). Doesn't seem to solve it.
dropbox has stopped working too; it seems like that malfunction may be related to the pagefilesys
I'm using Windows 7 ultimate 512MB of Graphic Card Pentium 4 3.0 GHz I wanted to upgrade my RAM as high as I can. So my computer will work fast when I'm playing games or when I'm working on something else. So, what's the highest RAM I can use? By the way I'm using 1GB RAM.
I'm using Corsair SSD as Windows 7 x64 boot drive, and I moved both User & System Variables TMP/TEMP directory to a new common TMP directory in another hdd (Drive D) & also disabled pagefile on my boot drive (but enabled it for Drive D).
Question is, what happens if I take off my hdd (Drive D and Windows 7 / applications need a temporary directory which doesn't exist anymore ? Will Windows 7 be smart enough to create a new temp dir in the original location ? I wonder if the dependancy on the hdd as TMP directory becomes critical.
About pagefile, I understand Windows 7 needs a min pagefile of 400MB on boot drive to allow memory dump. What happens if I disable pagefile on boot drive & enable it on another drive ? Will memory dump work ?
I'm running windows 7 and recently download IE 9, now when I open my browser to web page, the top and bottom of the screen is not filled but showing part of my screen saver. Is this a shortcoming of IE 9?
I was just wondering about the 32bit RAM range, if im not mistkaen a 32bit system can recognize up to 4GB of ram right?
If so how much does Windows 7 have reserved? because i have 4gb ram installed but windows only reveals 2.99GB RAM useable in the control panel. Anyone can clear this up?
