From last two days my laptop is not working whenever I turn on my laptop it show me the messege of setup repair automatecally then it start processing and after few min it show me finish option and when I click on finish it shutdown automatecally this happens again and again. If I try to start on safe mode I can't it againg start that process again.
View 1 RepliesI installed my graphics card into my optiplex 755 and it gives me a picture but it keeps sending me to a setup repair screen and says something is wrong with the hardware and when I try to just use the original vga no screen will show.
View 1 Replies View Relatedmy laptop shows display only at certain tilts...most probably at 45 degree....& at other entirely dark..
View 1 Replies View RelatedFujitsu Siemens laptop, Intel dual core, 1.75g ram. When I restart it, fails to load and doesn't even show to startup screen, nothing, just a black screen. so, I must shut it down from the power button. And if I start it rapidly, it's possible to not start from the first try. I made a fresh install of the OS, nothing. Can this be a hardware problem?
View 4 Replies View RelatedMy screen show box display rather than full screen size after downloading Microsoft Windows 7, how can I get Full screen size
View 1 Replies View RelatedWhen starting up get blue screen and says it is trying to repair problems. Was working fine when turned off a few days ago.
View 3 Replies View RelatedAs of about 3 days ago my Dell Inspiron N7010 (Windows 7 Home Prem 64bit) fails to boot up. It gets to the initial Windows screen before the login screen and freezes, then sends me into Startup Repair. [code] I've tried running the diagnostics and get no error codes. I've tried restore points, memory diagnostics.. pretty much everything except factory image, with no success. I have a lot of government programs installed on this laptop, so.
View 9 Replies View RelatedBlue screen and freezing. This is happening frequently but never has any regularity to it. Sometimes happens after a couple of days and sometimes after a couple of minutes. Also sometimes with only one browser window open and sometimes with 15 or more. Happens with both chrome and firefox. Has not happened with other programs as this lapy only gets used for surfing/email/forums etc. Sometimes happens while the computer is sitting idle right after boot. Very strange.
View 3 Replies View RelatedI have a problem when I open my notebook/laptop it always show the BIOS Setup, so what i do is I press "ESC" on keyboard the select "Yes" to discard the changes in BIOS and it loads the windows and works properly I tried to restart but when I restart same process the BIOS Setup always appear, how can I prevent the BIOS Setup showing in turning on my notebook/laptop?
[code]....
one day it suddenly crashed while i was watching a movie. it displayed random patterns on screen. kinda like part of the image from the video is on the screen then a black strip and random colors. I restarted the unit to safe mode and left it on and browsed the net and downloaded some big files for how many hours and nothing happened.. there are also times when windows is still loading with the windows logo on screen, it crashes. there are also times when the login screen is displayed and it crashes. it just crashes randomly! so i tried to reformat it. i deleted the partitions and created a new one, formatted it then fresh installed windows 7 ( my previous OS is windows 7 by the way) and started installing the basic drivers and after a few hours, it crashed again...thinking that the driver installed might not be compatible, i tried another fresh install of windows (same execution, delete partition, create, install OS) and this time, without installing the drivers, it crashed again after a few hours... sometimes it crashes immediately after turning it on from cold start!
View 7 Replies View RelatedI have been trying to clean install Windows 7 ultimate (DVD is fine, have installed on my friend's laptop successfully) since last week, but with no luck. Everything is fine during the installation; I can see the welcome screen, and then shut down. After my pc restart, passes the self-testing, it would reboot right before windows logo shows up. It turns into rebooting loop stopped every time before windows logo shows up. Also tried with Sapphire HD 3650 512MB (Dual DVI) graphic card, the results were the same.
System Spec:
CPU: AMD 3200
MB: Abit NF7-S2 V1.0 (Socket A, AGP 8X)
GIC: Gainward GF6800u 256MB (Dual DVI)
Memory: Corsair PC3200 Pro 2x512 twinx
HDD: WD SATA 500GB
Monitor: Samsung SyncMaster 923nw connect with DVI-VGA adapter
Starting a few hours ago out of nowhere my computer screen will only enlarge to about 90 percent regardless of the browser (Firefox and Internet Explorer) and even software programs such as music editing or anti virus.I have a Toshiba Dual Core Windows 7 with Norton 360/C Cleaner/Spybot that are run daily.
View 21 Replies View Relatedi only see a blackscreen until the logon screen shows up.
View 4 Replies View Relatedi've windows 7 professional RTM and it work very well ... i'm really happy for this os
but i've a small problem. i'have 5 local user and i want to see all user in logon screen but windows show me only the last one logged in ...
how can i set up my os for show me all user?
notes:
1) no user have password
2) administrator account is disable
3) all user are administrators
4) i not do anything before for change settings of my logon screen
someone can help me ?
When I turn my pc on, it will let me sign in, but won't show my start up screen. ,It shows a windows screensaver picture only. I then turn it off and try again..Sometimes it works fine but not often.
View 1 Replies View Related I recently updated my os to win 7 in my sony laptop(vgn-cs17g). I have loaded a 64bit version and i have a problem finding the nvidia drivers.
i have another problem also when i play a game the sides of the screen ar black i mean i am not able to get the full screen mode...even the drives in the sony website ar not upto the mark..
I have a problem with installing a fresh copy of Windows 7 Pro on a Shuttle XPC SN27P2 and was wondering if anyone else had seen the same thing?
Problem:
When I boot from the Windows 7 DVD the installation screen comes up in 8 colours only and the screen res looks like 640x480 on a screen that normally runs at 1600 x 1024 (this is what the original Windows XP installation ran).
Windows XP ran fine and did not have any of these problems (with the installer).
I am reluctant to proceed with the installer as I would prefer to iron out this problem before pushing on with the complete install.
Has anyone else seen this?
I have some problem after install ubuntu alongside my windows 7.After I installing ubuntu, when I want to use my windows 7, when came to login area (because I place password on my account), it dont show nothing, just black screen with cursor, I tried it with safe mode and I can login but its dont work in normal mode. My friend said its maybe driver problem, then I try repair using my Windows 7 DVD and also start my windows with setting "Start with last known good configuration (i dont remember full) but the problem dont solve.
View 9 Replies View Relateddespite the fact that i have been trying to boot up win7pro64 in normal mode in my vaio for the past one month, all of my endeavors have failed so far. i am left with nothing else other than going for recovery resulting the loss of all of software (hopefully, i can backup my data by using ubuntu which is present as dual-boot and/or by safe mode which are booting fortunately). i have tried the following so far in safe mode:
# HDD/RAM tests; passed
# malware check by malwarebytes; passed
# reinstalling the graphics driver as i have a doubt that the video driver is not working since screen goes blank instead of getting blue logon screen with user name/icon/password after windows initial boot (the cursor appears on the screen and i can make it move by using touchpad); passed
# start-up repair; failed
# going back to last good config; failed
# restore point; none exists!
# manual update by downloading recent patches from windows update catalog (using a different computer as this did not allow for some weird reason) since the problem started only after recent windows update that failed during installation; failed.safe mode does not allow me to fix anything, windows update does not work here in addition to some other important functions that could be done in normal mode.couple of windows updates and loss of the system? i will absolutely hate to go for the recovery.
My home pc (Windows 7 Ultimate) is part of my business domain, but I also have local user accounts for my wife and kids.
At the login screen there is a icon for the last user that logged in and another labeled "Other Users" for the rest of the users, so that if a different user needs to login they have to select "Other Users" then enter the DOMAIN/USERID and password to logon.
Is there a way to have it show all three users with their icons at the login screen so they can just click their icon and enter their password (all have passwords) to logon. Getting them to enter the DOMAIN/USERID correctly everytime is a challenge since the slash has to go the correct way and the domain name is somewhat long.
After setting up a new install of Windows 7 Professional 64bit on a Samsung laptop (previously had home premium installed). I am having these issues that I am not sure of how to resolve:
1) when clicking on the start button the programs screen pops open but NO recent programs or pinned programs show up in the list without going to ALL Programs.
2) Laptop monitor and 20" LCD Desktop monitor both are running and the neither one will go above 1366 x 768 resolution setting. I have reinstall the latest Nvidia Gforce drivers with no change.
is it possible to show date/time on login screen
View 5 Replies View RelatedMy webcam show green screen in windows 7
View 1 Replies View RelatedI have a saumsung lap and it came with windows home premium I shut down the computer like I always do but now it does not show anything from windows exept the internet show ?
View 3 Replies View RelatedOne day my computer decided not to load windows 7, and instead whenever i open my computer it gets to setup repair, which checks for problems automatically, and then gives the following message:Setup repair cannot repair this computer automatically
Problem Event Name: SetupRepairOffline
Problem Signature 01: 0.0.0.0
Problem Signature 02: 0.0.0.0
Problem Signature 03: unknown
Problem Signature 04: 0
Problem Signature 05: unknown
Problem Signature 06: 1
Problem Signature 07: unknown
OS Version: 6.01.7600.2.0.0.256.1
Locale ID: 1033
I have toshiba satellite P205D-S7438?
I have read many threads but they all contain ability to access start-up screen and I do not. I also do not get the pop up box to install windows 7. I literally only get "resuming windows" for 2 seconds, then straight to setup is starting services screen. I cannot pull up task manager or anything else. It is my nieces computer and I have no idea what she has been doing with it so I have no additional information for you. It is an Acer brand with windows 7, which is why I posted in this forum.
View 7 Replies View RelatedI was working in Outlook 2010 this morning.I clicked on an e-mail and the mouse was disabled.I was unable to do anything and then the BIOS setup screen came up.I escaped and did a normal startup from the Windows screen that came up and was able to work normally and shut down normally. How should I diagnose and address the problem? I was using a Pentium 5 Toshiba laptop running Windows 7 Home Professional.
View 1 Replies View RelatedI have scanned control panel items and cannot find where or how to change the login screen setup. Not the background, but witch users to show and when to skip and go straight to a specific user without login?
Windows 7, Core2 Duo CPU.
Trying to install windows 7 on a different partition to multi-boot with windows xp sp3.
Downloaded the "7600.16385.090713-1255_x86fre_client_en-us_Retail_Ultimate-GRMCULFRER_EN_DVD.iso" file and burned a DVD.
Booted from the disc and all went well with the "press any key to boot from CD or DVD" / "setup is copying files"..
Post this screen, the windows logo appeared and it took about 3 minutes for the screen where you choose your language,etc to appear.
Then comes trouble The screen remained idle for about another 3 minutes before the "Setup is loading" appeared and it stops here forever.... pls help!
Note: I tried installing from my pen drive as well..., but the same exact result.
Setup (Windows 7 ultimate 64bit) went fine until its first restart, then it took 10 minutes or so from bios to black screen to login.
After login, everything is fine and smooth. Installed latest nvidia driver for 8800gt Windows 7 64bit, installed antivirus and spybot s&d. restarted.
Again with the 10-minute-black screen. I can't have this.
I have winxp 32bit on the same hard drive but different partition.
I use two monitors but tried using just one and still have the same problem.
I have updated my bios (gigabyte motherboard), still have the same problem.
What is causing this problem? I'm not willing to upgrade/downgrade/change video card, motherboard, cpu or hard drives. Does not make any sense. I only want to try Windows 7 since it's "faster" but I'm perfectly content with winxp sp3. Why is winxp not having this problem? geez.
Can anyone help or should I just give up on Windows 7?
My father's girlfriend is giving this Toshiba laptop to my father, and I'm charged with setting this up.Starting off, the only (non-Guest) account has been:
[HerName]
Administrator
I created:
[HisName]
Adminsitrator
So when you boot up Windows 7, it lands here:
[HerName] [HisName]
Administrator Adminstrator
1) To put [HisName] first, on the left?or better yet, 2) Remove [HerName] from the logon screen, keeping the account so it can be switched to?