Iiyama Vision Master Monitor Problem
May 6, 2009
since today I've got Windows 7 RC1 64Bit installed on my PC & I've got a cruel problem.
I have an iiyama Vision Master Pro 454 and a desktop resolution of 1280x1024 with 100hz - until today!
But, it seems to be, that this is not possible with Windows 7.
Every time if I try to want to set the hz value to more than 85, the monitor automatically turns the value back to 85.
In Counter Strike 1.6 it is the same. I've played with a resolution of 640x480 with 150hz. But now, everytime I start the game, it is in the window mode with 60hz.
In the Nvidia System control there was an option where you can configure user-specific resolutions to get higher frequencies (like in CS 1.6, 150hz), but it's impossible to change there anything.
I've already installed the latest Nvidia drivers for my 8800GTX and the monitor drivers as well.
I have found an tutorial, but it doesn't helped me as well: GF8800GTX / Vista 64-bit / refresh rates > 100Hz ?
Maybe someone has an another idea to help me?
View 1 Replies
ADVERTISEMENT
Nov 30, 2009
I've got an iiyama vision master pro 454 monitor and today i changed graphics card today from a radeon 4850 to a radeon 5770 but after doing it my monitor drivers seem to have reset to generic pnp monitor instead of iiyama ones. I've tried downloading the iiyama drivers but even when i point it at the drivers it tells me my driver is up to date and doesnt change. Strange since windows automatically found the right drivers for me when i installed it.
Any ideas how i might get it to work?
View 7 Replies
View Related
Jan 28, 2009
I have bad issues with the resolution settings under Windows 7. With a fresh install of Windows 7 I can't move up to 1600X1200. the native resolution of my monitor is 1920X1200. I started to try some others drivers but without any success. I tried to use the NV panel wich offers me the correct resolution but when I click on the apply button nothing change or kick me out of range. The exact same thing using the possible settings from the adapter properties.
The reason is that the refresh rate seemed to be lock @70hz which is too high for that resolution using VGA. Some of you may say to try with HDMI cable, but I don't want because I 'm also using an analog KVM. It reminds me a PB I had when I installed OSX on my PC, but we're talking about Windows 7 here, and of course it's not the same exact problem. It seems to be a common problem with many of you. Any solution to fix it ?
View 2 Replies
View Related
Jan 12, 2012
I am a bit interested in plaing 3d games...but as i have a tight budget i was thinking to buy a Nvidia 3d vision kit.Now my concerning is if i use the kit a plug my screen via HDMI will i still be able to play 3d games on my tv.I do have a hp pavilion dv6-1130sa and a samsung lcd!
View 2 Replies
View Related
Feb 26, 2012
When I try to open it I get this: Could not load file or assembly 'CLI.Implementation' or one of its dependencies. The system cannot find the file specified. I have tried rebooting, reinstall several times and I have no idea what to do. I installed the latest drivers, but it still is not working. BF3 works, but crashes.
View 2 Replies
View Related
Oct 6, 2011
I have windows 7 professional is there a way to unlock the preinstall game that on the computer with that vision of windows
View 3 Replies
View Related
Dec 6, 2011
I've noticed that I've been having a minor problem recently. Whenever I play Skyrim, after I quit, my taskbar lags and AMD VISION Engine Control Center freezes upon loading and doesn't let me click anything, so I have to kill it by right clicking on the icon. The only fix to both of these problems is restarting, which is kind of annoying. I've tried killing explorer.exe and reloading it through Task Manager, but that didn't work.
I know that this is a pretty vague explanation, but do you have any advice? I'm using a Radeon HD 6850, AMD Phenom ii x6 1065T 2.9Ghz (with TurboBoost), 8 GB 1333 RAM, nothing overclocked, and I've got the latest Catalyst/AMD/ATI video card drivers. I launch Skyrim through Steam, and I run it at almost max settings at 1920x1080. No other game I've tried has caused this. Is it possible that my problem might lie in TurboBoost, my graphics settings, or is it merely a software glitch that might get fixed later?
I've played:
Killing Floor,
Half Life 2: Episode Two
Minecraft
Team Fortress 2
Counter Strike: Source
Garry's Mod
Portal
On this computer. No really recent games, since this is new and those were the only games my other computer could support.
View 3 Replies
View Related
Jun 3, 2012
i uninstalled or disabled amd vision engine center control without knowing what it did. i get a message saying amd vision control center is not supported by the driver version of your enabled graphics adapter please update amd graphics driver or enable your amd adapter using thhe display manager?
View 2 Replies
View Related
Nov 30, 2012
I got a NVIDIA GeForce GT 540M grafical card in my notebook. However, most of the time I use the Intel integrated graphics (Ci7-2670QM processor). All NVIDIA drivers and NVIDIA applications are installed too.When I double-click any 3D picture file (*.jps file), the NVIDIA 3D Vision Photo Viewer is then called;however, the app doesn't seem to find the display adapter of nvidia and generates an error:"primary display's adapter does not support nvidia 3d vision".I tried to fix the problem using the NVIDIA's Control Panel by setting the gt540m as the preferred gpu, and rebooting the computer a few times, but it does not the error keeps on popping up. I've also associated the gt540m as the preferred gpu specifically for the /NVIDIA 3D Vision Photo Viewer/ app, but also that doest even after a few reboots.I read somewhere one should install the NVIDIA Optimus app but I prefer to solve the problem manually and not let the problem be solved in a hidden way by some other app---Optimus in this case
View 5 Replies
View Related
Oct 24, 2012
With the new pc parts I just got I also got a wd 1TB hardrive I want to use the whole drive as a single formatted drive can Windows 7 do this because I am told that XP can't handle that large of a single format.
View 4 Replies
View Related
Aug 11, 2012
how can re-master my original dvd video in hd
View 5 Replies
View Related
Jul 22, 2010
What is master boot record(mbr)? Could anyone please tell me about it and its function.
View 3 Replies
View Related
May 10, 2011
i got sata disk with windows 7 on it,and ide disk...i changed jumper on ide to master..?? now in bios,ide configuration ,onboard ide controller is enabled,serial ata devices are mark as "device0/1" .(i have sata dvd/rw and sata disk)..is that ok..problem is when starting pc ,after changing jumper from cable select to master,althought its only ide device ,my pc takes time about 30 sec to list all devices....what to do to solve it and still leave ide as master.
View 6 Replies
View Related
Feb 23, 2012
I was wondering if there was anyway that I could make like a master copy of an OS, particularly Windows XP, but also Vista and 7. If this is a lame question please forgive me as I am not the most computer savvy , but I'm looking to have a copy of each of the above mentioned OS's that I can use to trouble shoot my friends and families computers, but I'm afraid I'm going to run into issues with the product keys only being able to be used a limited number of times. Is there anyway around this? Is there a more expensive master copy type disk that you can buy for such a purpose?
View 7 Replies
View Related
Aug 22, 2011
Today I just used a removal tool by Symantec to remove the virus Tidserv Activity on one of my laptops. I restarted the computer and it wouldn't boot. Now I need to restore the MBR since the MBR was infected.It's a Dell laptop. I found that the laptop has System Recovery preinstalled. The instructions Symantec gave me to remove the virus says to use the Windows 7 CD-ROM to restore the MBR, which I don't have.I do however have a Windows 7 re-installation DVD, if reinstallation makes a difference.Can I use the re-installation DVD and is that safer? Or is it okay to just go to System Recovery since it's already pre-installed?My third question is after I decide which way to go about tackling this issue, how do I manually restore the MBR? I've faintly entered "fixmbr" command in the command prompt but it didn't work, basically saying it wasn't a valid command.
View 13 Replies
View Related
Sep 19, 2011
I install a new window 7 and forget to backup the EFS certificate and key form windows xp, then now i can't decrypt or open the data. someone can tell me how to decrypt or recover data , that data extreme important.
View 2 Replies
View Related
Aug 10, 2012
I purchased a 1 TB Seagate Hard Disc about four months ago.It has two Partitions One 50 GB with Windows 7 New and other a 950 GB with movies,music important documents etc.I also have two more Internal Hard discs with Windows 8 and another windows 7.For last one week or so had problems in booting into new Windows 7 got message that it should be repaired through Windows DVD.Did the needful and booted up.The next day same problem and my action the same. This happened about 7 times or so.Today same problem.My reaction the same.But while booting I got a message that the 950 GB partition cannot be accessed because MFT is corrupt.Browsed through Windows 7 Forums and as advised in one of the threads downloaded Testdisk.Ran the program but unfotunately the dreaded message that both MFT and Mirror MFT are corrupt.Have lot of badly needed Data and I really want to recover it.
View 3 Replies
View Related
May 8, 2011
I just received my external enclosure which I will use my FAT32 drive, do I set It to master or slave Setting? Just want to save a little time and be sure I'm not fighting with Win 7 Settings.
View 3 Replies
View Related
May 7, 2011
Have a PC with Windows 7 on it. First hard disk with Master Boot Record failed (had an install of windows xp on it) - have now removed faulty disk, but PC will not boot due to Master Boot Record not being on second disk.How do I go about re-creating the MBR on this Windows 7 install disk ?Tried googling, and as usual nobody seems to have a quick / easy fix - and tried Windows 7 repair options, doesn't work (doesn't even recognise Windows 7 is on the disk).So, I have a non-bootable PC... with access to other PC's and laptops around me (also with windows 7 on), so could plug the disk in to one of those via usb dock station etc...
View 9 Replies
View Related
Oct 2, 2011
I'm not sure where online to go (what forum) to ask this question, so I will just start here.I build and sell PC's to small businesses. Well configured systems. No junk. I use as much free software as possible. Liscenses permitting. Quality software.I want to make a master system(s), just one master if possible. Windows 7 with all the apps, ready to go. I want to migrate this master(s) to other PC's.Supplying new license keys when needed.Worst case scneario, dis-similar hardware.
View 9 Replies
View Related
Jan 11, 2012
Giveaway of the Day ( 16 hours left): EaseUs Partition Master Professional 9.1
View 3 Replies
View Related
May 5, 2012
how to unistall adobe cs5 master master collection?its not on the list in control panel?
View 6 Replies
View Related
Mar 20, 2011
Recent update installed was Itunes with a google toolbar.Started getting adware warnings and saw some kind of "adware/malware doctor" asking to update on the pc. When I went to deinstall it as I could see it in the programs list, all hell broke loose and now my machine doesn't boot.
View 4 Replies
View Related
Aug 30, 2011
I have annoying administrator pop up that asks for a code every time i open up a new download. I really need these downloads to run my computer the way i want it. I don't know how the administrator pop up got on here in the first place. Is there a master code i can use to type in the password bar when the administrator pop up appears?
View 3 Replies
View Related
Mar 14, 2010
The Master Boot Record, How do you protect this from being damaged or corrupted and even from a virus attack.Can you back it up in some way , or do you need a backup and recovery program for this.
View 6 Replies
View Related
Feb 12, 2013
Am trying to control the master volume programatically by C++/VisualC++ for indows7/vista... i have googled but didn't find any related solutions
View 1 Replies
View Related
Apr 2, 2010
want to let you know that EASEUS Partition Master Home Edition v 5.0.1 will not create partitions out of the unallocated disk space I made in my hard drive using this application. When I put the mouse pointer over the unallocated disk space, the feature for creating partitions does not get availableI am starting to think that the OS i'm using doesnt allow any more partitions. It's Win 7 Home Basic. The machine is a HP pavilion dv4 laptop computer. The partition master 5.0.1 shows me a display more or less as follows, indicating that I have four partitions:[CODE]
View 3 Replies
View Related
Jun 26, 2012
I downloaded EasyBCD 2.1.2, used it to recognize EVERY boot record, deleted the MBR on the old HDD, and rebooted.Now, the system boots straight to the new HDD without prompt from bootloader (which is good) but still requires the presence of the old HDD (I disconnected it, alas...)In the end: I called and told the customer that "I'd be happy to GHOST all her data and slap a fresh Windows 7 install on the new HDD (with a fresh/whole MBR) and then drop all her data back onto it. However, this would require more time; the other option being that she accepts the machine for what it is, perfectly functional minus the dependency on the old HDD."have considered this option, but I found ZERO indication of the old HDD failing, other than "BAD" written on the drive with Sharpie. The customer was happy yesterday and accepted the current state (she didn't want to invest more time/money into it) but today when she picks it up she isn't happy because she was told four months ago that the drive was bad and now I'm saying I don't see an indication of it. Other than pulling the data, installing fresh OS, then dropping data back on; or not installing OS with two drives present in the first place?
View 4 Replies
View Related
Jul 23, 2011
I'm using Win 7 Home Premium, 32bit. Recently upgraded from XP Pro. Now I can't get usable Greek fonts on Print-master 16, Calendar Creator 8.0 or Parsons Address Book Deluxe 6.0.
View 5 Replies
View Related
Aug 28, 2009
How to Restore the Windows 7 MBR (Master Boot Record) ?
View 0 Replies
View Related
Jun 2, 2012
I am using Asus UEFI M5A97 motherboard. I have GPT formatted WD30EZRX Caviar Green 3T. The OS is Win7 64-bit Ultimate. The system is working fine with that hd. I have another hd WD2002FAEX, a Western Digitial 2T Black edition. On it, there is also similar OS Win7 64-bit Ultimate. This one is formatted in normal MBR. It is also working fine on its own.The problem arise when I am attaching both the hds on the system. I want to boot on the 3T and to treat the 2T as secondary (slave). When I do that the system does not boot. So far I am not able to configure the BIOS to make it work. After a few trying with the BIOS settings, the system manages to boot on the 2T but that is not what I wanted.
The only way I could use all the hd is by 'brute-forth'. I think that's the term. I make use of hds hot swapable. Leave the side cover open at all times. Plug the power cables to all available hds (but not the sata cables - the cables are plugged onto the board only). Plug the sata cable to the 3T drive and boot the system. When the system is up, plug the other sata cable to the other hd that I want to use as secondary. Plug in more sata cables to other hds if you need. I tried with four and the system recognizes them all.
View 6 Replies
View Related
