EASEUS Partition Master Won't Create New Partitions?
Apr 2, 2010
want to let you know that EASEUS Partition Master Home Edition v 5.0.1 will not create partitions out of the unallocated disk space I made in my hard drive using this application. When I put the mouse pointer over the unallocated disk space, the feature for creating partitions does not get availableI am starting to think that the OS i'm using doesnt allow any more partitions. It's Win 7 Home Basic. The machine is a HP pavilion dv4 laptop computer. The partition master 5.0.1 shows me a display more or less as follows, indicating that I have four partitions:[CODE]
I need to create a new partition for Ubuntu, but I have the maximum number of partitions. I have tried converting the disk to dynamic, but it says that there is not enough space available for that. What should I do? (The 75 gb unallocated space is where Ubuntu should go)url...
After I used "Acronis Disk Director" in a HirenBoot CD to cut some space from my D drive to my C drive (boot drive), I've got this "Windows is checking the D drive" then "Corrupted master file table. Checkdisk is aborted" on my D drive. After doing some homework, I've tried corrected it by using testdisk's Fix MFT function but "Both of the MFT files are corrupted. Can't fix". I did not back up the whole partition. I do not really want to buy $60 + commercial software that TestDisk recommends just to fix this possibly once-in-a-lifetime issue. However, if recovery softwares is the only option left, then I have to use them.
One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs Partition 2: home partition for himself Partition 3: home partition for his mother Partition 4: home partition for his sister Partition 5: home partition for his other sister Partition 6: shared partition for some photos.
I installed Windows7 Ultimate from scratch, and it warns that it might create a 100MB partition before creating a second one where the real stuff lives. This makes imaging more complicated.
Code: # fdisk -luDisk /dev/sda: 320.1 GB, 320072933376 bytes255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0xf1f75308 Device Boot Start End Blocks Id System/dev/sda1 * 2048 206847 102400 7 HPFS/NTFSPartition 1 does not end on cylinder boundary./dev/sda2 206848 30722047 15257600 7 HPFS/NTFS/dev/sda3 172908544 254828543 40960000 83 Linux
Does someone know why Windows7 needs two partitions, and whether it's possible to have a single partition?
I'm also interested to know if any steps are required before imaging Windows7 (sysrep, etc.) where the image will be reinstalled on the same host (own test machine).
I'm trying to partition my 500 GB hard drive into 3 drives total. Right now, there is only a C Drive, but I want to divide that.
When I go into the Windows 7 installation, this is what I see:
Extend and new are grayed out, and even in disk management, there is no unallocated space.
Can somebody please guide me into partitioning this hard drive. I've searched and the only answers I find are for dual boot setups. Partition Magic is not supported by Vista (.: 7 as well).
I had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
I'm here with 8 hd's all blocked, formats need them but I'm not getting or creating a partition because they are blocked, HDD Unlock saw the program but is expensive and is paid
I'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
I'm thinking of installing the RC of Windows 7 when it is released tomorrow. But there is one thing that is worrying me. When I go to install 7, i have read that it creates a 200mb partition. On my Acer laptop, there are already 4 paritions, a 9.76GB which does not show up as a drive, a 69.77GB which is labeled as 'ACER', a 66.27GB which is labeled 'DATA' and then a 3.24GB partition which again does not show up as a drive.I know that there is a recovery partition built in, will this 200mb parition affect them? I will be installing (using the upgrade) on to 69.77 Partition, or will it just spilt the 69.77 partition into two?
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
A friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
Noticed on their website, that you cannot hardly discover the link to the "Free" version of the software anymore.For the time being, if you hit their website, and type "Free" in the search box at the top you can still find this link, which has the copy of the software still available for download; Best free backup software. Hard drive backup and recovery, image and clone freeware - EaseUS Todo Backup Free
I have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive -Formatting using Hiren's bootcd -Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install) -diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
I want to create a new partition to load Linux on it (on my Windows 7 system). Now I currently have a C-drive(Windows), a D-Drive(80GB) and an E-Drive(400MB). Now how do I create a new partition for Linux, without using the windows cd and booting from it? Can I use Virtual Hard Disk(VHD)?
I've done a clean format to my OS . But at the partition creation part , some of my hdd couldn't be used to make a partition of it . I'll give you a screenshot to explain my problem better s you can see after the process tells me that creation of a new partition has been completed i end up seeing this error
I've been trying to set up a 2nd partition to put a 32bit windows 7 on, but I can't.But it's not letting me edit how much I want to shrink my drive by. Even if I manually put in a number, the "Shrink" button is gray and I cannot click on it.
i am using lenovo y510 laptop which comes with an hidden OEM partition which can be used for "one key recovery" process to restore original settings or to format the pc without any cd or dvd or usb and it is a very nice feature a laptop can have...
now my question is...
my laptop has vista home basic in its OEM partition...is there anyway to change it to Windows 7...so that it can format Windows 7 whenever i press recovery key ?
when I'm formatting a HDD that is completely clean (no partitions or volumes) should I create a partition or some kind of volume to format the drive, which will format the whole drive, I don't know which one to go with.
If partition, what kind, primary extended etc. If volume, what kind of volume RAID, stripe etc
I have an odd problem - I have 2 drives - one SATA one IDE on the motherboard to choose from. Both blank. The install program sees them, apparently can partition them (let's me into advanced options), but when i select either one to install to, gives an error that it cannot create the partition.
i got a new hp laptop which already as 3 partitions. C:, Recovery (D) and Local Disk (Q). Since iam very new, i want to know can i take a Backup of the Recovery(D) in DVDs and restore the space (capacity) to C drive? Or is it necessary to have it in the system? When i try to make a partition from C drive, the same old prob of getting Dynamic disk conversion comes up...Now dat i got back all the unallocated partition back to C, how do i create another new partition? I tried checking with other posts but was unable to understand..
kay I am trying to make bootable USB so I can reinstall my Windows 7, but when I get to the step to create partition primary, it tells me there is insufficient space to do so. What's up with that? I really need to get my laptop back working before the 14th, because I am going up to my grandparents' house for the summer and would like to bring my laptop with me. I also don't want them to find out I broke it so...heh.Also, I've tried burning the ISO to a 4GB DVD disk with ImgBurn but every disk I do gives me an error, and I only have 3 DVDs left and I don't want to try again because I don't want to waste them. I actually just went out to buy this USB so I'm really upset that I'm having issues with it
