I had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
I'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
A friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
I have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive -Formatting using Hiren's bootcd -Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install) -diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
I want to create a new partition to load Linux on it (on my Windows 7 system). Now I currently have a C-drive(Windows), a D-Drive(80GB) and an E-Drive(400MB). Now how do I create a new partition for Linux, without using the windows cd and booting from it? Can I use Virtual Hard Disk(VHD)?
I've done a clean format to my OS . But at the partition creation part , some of my hdd couldn't be used to make a partition of it . I'll give you a screenshot to explain my problem better s you can see after the process tells me that creation of a new partition has been completed i end up seeing this error
I've been trying to set up a 2nd partition to put a 32bit windows 7 on, but I can't.But it's not letting me edit how much I want to shrink my drive by. Even if I manually put in a number, the "Shrink" button is gray and I cannot click on it.
i am using lenovo y510 laptop which comes with an hidden OEM partition which can be used for "one key recovery" process to restore original settings or to format the pc without any cd or dvd or usb and it is a very nice feature a laptop can have...
now my question is...
my laptop has vista home basic in its OEM partition...is there anyway to change it to Windows 7...so that it can format Windows 7 whenever i press recovery key ?
when I'm formatting a HDD that is completely clean (no partitions or volumes) should I create a partition or some kind of volume to format the drive, which will format the whole drive, I don't know which one to go with.
If partition, what kind, primary extended etc. If volume, what kind of volume RAID, stripe etc
I have an odd problem - I have 2 drives - one SATA one IDE on the motherboard to choose from. Both blank. The install program sees them, apparently can partition them (let's me into advanced options), but when i select either one to install to, gives an error that it cannot create the partition.
i got a new hp laptop which already as 3 partitions. C:, Recovery (D) and Local Disk (Q). Since iam very new, i want to know can i take a Backup of the Recovery(D) in DVDs and restore the space (capacity) to C drive? Or is it necessary to have it in the system? When i try to make a partition from C drive, the same old prob of getting Dynamic disk conversion comes up...Now dat i got back all the unallocated partition back to C, how do i create another new partition? I tried checking with other posts but was unable to understand..
kay I am trying to make bootable USB so I can reinstall my Windows 7, but when I get to the step to create partition primary, it tells me there is insufficient space to do so. What's up with that? I really need to get my laptop back working before the 14th, because I am going up to my grandparents' house for the summer and would like to bring my laptop with me. I also don't want them to find out I broke it so...heh.Also, I've tried burning the ISO to a 4GB DVD disk with ImgBurn but every disk I do gives me an error, and I only have 3 DVDs left and I don't want to try again because I don't want to waste them. I actually just went out to buy this USB so I'm really upset that I'm having issues with it
Here is the link to the old foru:am trying to figure out if I should just go ahead and do a clean [re]install or create a partition first. I am not good with partitions.
Recently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
I'm preparing a fresh install of Win 7 Pro on a 2 disk system (90GB SSD and 1TB HDD). I'll be placing the OS/Apps on the SSD and Data and image restore files on HDD.Qs:1. If I allocate ~60GB for the OS/Apps partition, and actual storage of the OS/Apps is 35GB...what size partition do I need on the HDD to save this image file? I assume the compressed file will be 45-50% of original. Will I want to store multiple image files created over the course of time as apps are added and system is further optimized, and hence need a partition that is a multiple of the OS/App partition size? What do you do?2. Also, an 8GB RamDisk will serve as scratch disk space for some apps (RamDisk +) which can save an image of the session's writes upon shutdown. I plan to save this image to the 2nd HDD. Is it recommended that I save this to same partition that stores the OS/App image in Q #1 above,
Ive bought A lenovo g580(?) with 7 pre installed. There is four partitions preinstalled on the hdd. I've understod that You can not delete any of these, in order to keep the recovery system working. Four partitions is the Max number of such.Is it possible to Get an extra data partition?If not, should i store my user data on c? What if win7 crashes,then i Will loose everything on c
Ive bought A lenovo g580(?) with 7 pre installed. There is four partitions preinstalled on the hdd. I've understod that You can not delete any of these, in order to keep the recovery system working. Four partitions is the Max number of such.Is it possible to Get an extra data partition?If not, should i store my user data on c? What if Windows 7 crashes,then i Will loose everything on c
Here's the scenario: I have a 1TB disk with several partitions on it.
#1: Primary partition with Vista on it.
#2: A 500GB primary partition used as storage/backup.
#3: A 50GB partition encrypted with Truecrypt, Logical drive
Now, I want to create a new Primary partition at the end of the drive, so I can install another copy of Windows 7. Notice my 500GB storage partition does not need to be Primary, but it is, and I cannot create any more Primary partitions. How can I change the storage partition to a logical drive, and have my new partition be Primary?
whenever i try to install win 7 rc1 64bit on a freshly "formatted" partition (as windows doesn't seem to fully format them prior to selecting them) i get the above error message
i am running on a GA-M55plus-S3G
2 samsung spinpoint sata hardrives and an athlon x2 64 4200+
edit: okay so what i did now was to install an older IDE hard drive and create a new partition on there
it created 2 partitions in total
one was 100MB in size and labelled as system partition the other was the rest of the disk size (it's a 200GB WD caviar) i could start installing win 7 on the larger partition without problems
it's not the best solution as i wanted to run Windows 7 with a raid0 sata array with a new drive i am about to buy but i guess i'll have to bear for now.
I have Intel X-25M 80 GB SSD. I want to install Windows 7 Pro x64, MS Office and other application on it.Should I create partition primary align=1024 or Create partition primary size=100 align=1024?
I'm getting this error when trying to install windows 7 rc x64:
"Setup couldn't create new system partition"
Then it asks me to check the setup log, but I don't know how.
Trying to install onto the 2nd partition of a 160 gb drive, split in half. It's disk 0, the first partition is active primary and has XP. The second partition is formatted ntfs primary and when I select it in windows setup, that's when I get the error message. I let windows 7 delete it and create a new partition and formatted it, but when I select it to install windows onto, it give me the above message.
It's a SATA drive running in native IDE mode on an AMD790GX board with a Phenom II X4 940 and 4 GB RAM.
It doesn't seem like it would be a drivers issues, since Windows sees the drive and both partitions, allows me to delete, create and format partitions, just won't let me install onto it. Any ideas?