When I try to open it I get this: Could not load file or assembly 'CLI.Implementation' or one of its dependencies. The system cannot find the file specified. I have tried rebooting, reinstall several times and I have no idea what to do. I installed the latest drivers, but it still is not working. BF3 works, but crashes.
View 2 RepliesI've noticed that I've been having a minor problem recently. Whenever I play Skyrim, after I quit, my taskbar lags and AMD VISION Engine Control Center freezes upon loading and doesn't let me click anything, so I have to kill it by right clicking on the icon. The only fix to both of these problems is restarting, which is kind of annoying. I've tried killing explorer.exe and reloading it through Task Manager, but that didn't work.
I know that this is a pretty vague explanation, but do you have any advice? I'm using a Radeon HD 6850, AMD Phenom ii x6 1065T 2.9Ghz (with TurboBoost), 8 GB 1333 RAM, nothing overclocked, and I've got the latest Catalyst/AMD/ATI video card drivers. I launch Skyrim through Steam, and I run it at almost max settings at 1920x1080. No other game I've tried has caused this. Is it possible that my problem might lie in TurboBoost, my graphics settings, or is it merely a software glitch that might get fixed later?
I've played:
Killing Floor,
Half Life 2: Episode Two
Minecraft
Team Fortress 2
Counter Strike: Source
Garry's Mod
Portal
On this computer. No really recent games, since this is new and those were the only games my other computer could support.
i uninstalled or disabled amd vision engine center control without knowing what it did. i get a message saying amd vision control center is not supported by the driver version of your enabled graphics adapter please update amd graphics driver or enable your amd adapter using thhe display manager?
View 2 Replies View RelatedI got a Sapphire Radeon HD 6700 series, my monitor is a little wierd so i was adjusting it with catalyst control center, later i updated catalyst and now it wont even open.
View 1 Replies View RelatedI installed CCC recently. When I restarted my computer it started becoming unresponsive and locked up alot.
View 9 Replies View RelatedSo I wanted to install newest version of catalyst control center and it would install it but nothing would change. I formatted my laptop and still it wont install the newest version of ccc. I downloaded a driver from toshibas site it would install that but it seems like an old version (2010.0315.1050.17562).
This are my computers specs: windows 7, 6 gig dd3 ram, Intel core-i5-430m 2.260 MHz, ATI Mobility Radeon HD 5650
I get an error message when I first startmy computer saying, your Catalyst Monitor Control Center has stoppedworking. I don�t know what this is. Sois this something I should fix, or justforget about it? If it should be fixed
View 1 Replies View RelatedMy Graphic Card AMD Redeon HD 4600 Series & 11.8 Driver. Any recommended For CCC Setting ?
View 4 Replies View RelatedIve been trying to install this program on my computer because when i plug my laptop by HDMI cable to my Samsung TV, the resolution does not fit well and everything looks pixelated.My friend had the same problem but his laptop included the Catalyst Control Center and he made some adjustments and the problem was solved.I already installed the program but when i right click on my deskop the program doesnt show up on the options, on my control panel it says it is installed but it wont open for some reason.My computer is an HP Pavillion dv4-4068la with Intel HD graphics card.
View 2 Replies View RelatedThis is a little embarrassing, but I can't seem to find out what some of the on screen control are doing when watching live TV. That is, the small coloured button on the left hand side of the screen, to the left of the Text TV button. Also, the two button to the left of the coloured button, I am grateful for any advice. My TV works just fine by the way, jsut that I like to know what option there is to use.
View 3 Replies View RelatedWhat is the newest driver and how can I determine the current one?
View 3 Replies View Relatedsetting up ATI Eyefinity Catalyst
View 3 Replies View RelatedHow to start catalyst control center
View 1 Replies View RelatedI've been having this issue with multiple versions of Windows 7 (beta, RC, and now retail), so I'm wondering what the issue could be. I did a search for this but didn't find anything - if there is a thread, please close this and direct me to the right place!Anyways, I have a Radeon HD 4850 and am using Windows 7 Home 64-bit. I have been trying to install the Catalyst Control Center (CCC) for quite some time now, but it always ends in the same result - a blue screen. I've downloaded several different versions since the public release of Windows 7 (tried about 5 driver versions) and each has been an equal failure. The only way I update my driver is by extracting the files from the CCC downloader and updating them via the device manager which works fine.
View 17 Replies View RelatedI currently connect my LG Flatron W2361V Monitor & my HD 5830 GPU with a HDMI cable, however some times when I turn my monitor off & come back to turn it on it takes a long time to pic up a signal & when it does system feels slow. However after checking the Catalyst Control Centre is showed my GPU Activity was 99% & it stops like that until I reboot.
View 4 Replies View RelatedI get a red flag from the little ACTION CENTER icon at bottom once a week saying that my anti-virus, firewall, anti spyware is off. But my Norton 360 isn't off, just the ACTION CENTER on the Control Center SECURITY SETTINGS shows OFF.I have to turn my 360 off and on to reset it.Never happened before.
View 9 Replies View RelatedWhen I open up my control panel > System & Security then click "Windows Update" the control Panel freezes and stays that way. I have to ctrl+alt+delete to end it and wait a few seconds for windows to restart.
View 9 Replies View RelatedOrdered a new XFX HD5850 Black edition which is being delivered tomorrow , for the nice sum of 111.Will be running it in crossfire with my current 5850.Do I just plug it in and enable crossfire in the catalyst control center or will I need to install drivers for this card first?
View 7 Replies View RelatedI just bought an HP Pavilion dv7-6120sx equipped with ATI Mobility Radeon HD 6770 running Windows 7 home premium. I've been trying to remove the scaling option in the Catalyst Control Center, but it detects no monitor under the Advanced Display Settings
View 9 Replies View RelatedI bought a pre-built desktop a little over a year ago. It cam with integrated graphics, an ATI Radeon 3000. I installed an HD 6670 shortly after. I now have a two monitor setup. I have my primary monitor hooked up to the 6670 and the secondary to the 3000. After updating CCC to 12.6 from 12.4 the second monitor isn't detected. I've been going to device manager and uninstalling the 3000 drivers, then restarting, and my secondary monitor is detected, drivers auto install, and both work. Unfortunately when I check CCC it's back to 12.4.
View 2 Replies View RelatedCatalyst Control Center is nowhere to be found in my PCPlease tell me where is the CCC executable so that I can run it manually.
View 1 Replies View RelatedI tried to set up my windows 7 but it said that my ATI catalyst control center is incompatible with windows 7. what should i do? Also i cant get rid of it because it is used for my graphics card.
View 8 Replies View Relatedcatyalist control center stopped working
View 1 Replies View RelatedI can keep getting a message that the Catalyst Control Center has stopped has stopped working and Microsoft is searching for a solution.
View 1 Replies View RelatedI am getting my desktop ready for the launch of Windows 7 and I done a check with advisor and it said I I have to get a update for 'ATI catalyst control center' and my version which was installed onn the desktop when I got it is1.2.2113.53 but I cannot find the update and all it says is version 9.9.
Ken
I am operating with Windows 7 64 bit (6.1.7601); Intel Core i7, 8GB RAM.
My problem is pretty frustrating. I've just bought a Brother Printer (MFC-J6510DW) and have been trying to get Brother's Control Center 4 (CC4) to install to my laptop. The installation process works fine, and my laptop is able to 'connect' to the printer, yet when I try to open the CC4 application, nothing happens. The icon is visible, it is visible in my program files, and even shows as running in my Notification Area. Yet when I double click the icon, the mouse shows the spinning loading symbol, then nothing!
As the software is running without issue on my girlfriends laptop though, who is also operating on Windows 7 64 Bit, they have suggested that it may be an issue with my laptop as opposed to the software. That's why I came here! I have tried a multitude of solutions, and none have worked yet. Having scoured the web for similar situations, I have yet to find a similar situation or solution.
This includes;
-Running program as administrator
-Reinstalling the software (a lot!)
-Running the program in various other compatibility modes (XP and Vista - not really sure what I was doing here, so that still might be an option to try properly!)
-Updating the software with the latest update via Brother's support website, including updating the Printers firmware
-Installing the software entirely of Brothers website, as opposed to using the provided installation CD
I really need to get this software working. Without it, I am unable to scan over the network wirelessly, which is one of the reasons I bought the printer!
catalyst control center isn't appearing in catalyst install manager? i have uninstalled all ati stuff from my laptop and ccc simply won't appear, also, when installing the display driver, my screen resolution will always get ruined and becomes stretched and messed up. and i am having problems with battlefield 3, where my terrain becomes black and just a bunch of random boxes, similar to this - battlefield 3 graphics problem (black ground) (solved) - Internet but i'm trying to install catalyst bullshit and leads to my first question.
View 9 Replies View RelatedMy catalyst control center was bugged so i decided to just do a complete uninstallation, which was successful. When i went to do the fresh install, the install manager would not give me the option of install the catalyst control center even though i uninstalled it. i have been looking through various fourms for solutions, but i only found one that seemed appropriate but it failed. it was the solution of looking in windowsassembly and uninstalling the ATI related products with the public key code of 90ba70f846762.
View 1 Replies View RelatedI have a 8500 all in wonder 128 mb card. the machine is win 7. i can install the drivers, but cant seem to get the control center to install. when i do try to install it, the message tells me to install generic card drivers first. i have tried that to no avail.
View 2 Replies View Relatedi noticed that my PC had been using a lot of the SSD for information i felt should be saved on the HD. i read some forms and someone said that the C:USERS folder can simply be dragged to the HD so that everything is saved there. so i copied it onto my other HD and renamed it USERS2. unfortunately i noticed that this didnt and doesnt work and for some reason the USERS folder on my SSD has gotten renamed to USERS2 as well and the Catalyst Control Center application no longer works... i dont know how to fix it and im afraid that i might dig myself further into this mess.
View 7 Replies View RelatedAll of a sudden I cannot open CCC. The mouse flickers like it is loading it and then nothing occurs. I have uninstalled ATI 12.4 fully and drive sweepered it and reinstalled and still have the issue.
View 9 Replies View Related