How To Make A Data Partition With Windows 7 On It
Nov 18, 2010
I already know how to make a data partition but I wanna know how to make a data partition with windows 7 on it so in the case of an emergency i can use the data partition with windows 7 on it to reinstall the os so I wont have to use a disk im asking because my pc did not come with a partition that has a copy of the preinstalled os on it so you can reinstall the os if needed like with most pcs thats you buy from the store. Im currently useing a preinstalled version of windows 7 but I also have a retail disk with windows 7 on it
View 2 Replies
ADVERTISEMENT
Jan 11, 2013
I currently have a disc copy of windows 7 and I am currently running it as my main OS as well. I was wondering just in case my computer decides to have a few issues is there anyway I can make a data partition to store windows 7 or put it on a flash drive so that in the incident of a hardware failure I would be able to go into my bios and boot the recovery partition or boot it from a flash drive allowing me to reinstall the OS.
View 3 Replies
View Related
Jul 11, 2012
I have two hdds (500gb 7200rpm) in my laptop and have 260gb of data on the second one. I wanted to create a partition for games at the beggining of the 2nd drive (the left side) as i heard it increased performance to put games in anoher drive and at the beggining of the drive.Will it make difference to make a partition at the beginning or at the end of this drive when it comes to gaming performance?My cousin showed me one game in the same drive installed in the 1st of four partitions of a 500gb 7200rpm (the same i have) performing with 3-5 fps more than that game installed in the 4th partition of that same drive....
View 9 Replies
View Related
Jan 23, 2013
I install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies
View Related
Mar 9, 2012
I have my pc configured for music production. I have multiple drives installed (6 in total). The issue is this : the boot drive where windows 7 is installed is OK , but windows boot process freezes at the startup logo screen and does not go past this stage. After investigation I found out that when one of the other drives is faulty. Windows does not boot. If you disconnect the faulty drive .. then windows BOOTS normally.
No message is displayed during the windows startup phase. Is there a way to configure windows such that It ignores the bad drive at startup. It seems that windows waits for the drive indefinitely and jams there not timing up after some time.
View 7 Replies
View Related
Jul 2, 2010
I recently acquired a 60GB SSD and want to migrate my current system hard drive to the new drive. However, when I go to the Windows Backup manager to create a system image, it wants me to copy ALL of C partition and ALL of D, when it should only be C.D drive is full of a bunch of crap that I do not want included in the system image.If there even are system files on D, by no means is copying the entire partition necessary!Therefore, is there any way to make partition D NOT a system partition?
View 1 Replies
View Related
Feb 25, 2010
I have a system with two harddrives, one with Vista and one with Win 7. Vista drive was used to boot the system. Recently Vista drive dies, so I tried to boot from Win 7 drive. Since bootsector isn't there I can't. How do I make the remaining Win 7 drive bootable?
View 2 Replies
View Related
Dec 28, 2011
I accidentally deleted a partition in Windows 7 (dynamic disk) using the disk management tools. That partitions is full of works and photos from the last 2 years. Are there any way I can recover the data? The space left by the deleted partition are still un-allocated at the moment. Do I need to create the partition prior to data recovery? I am using Active Partition recovery to scan at the moment. No result yet.
View 6 Replies
View Related
May 2, 2012
Win7 64bit had separate partitions for data and os, after some bootup issues the windows partition is ok but data partitions show zero bytes - cannot lose valuable data!
View 1 Replies
View Related
Jun 23, 2011
I would like to make my PC dual-boot with Windows 7 Home Premium 64bit version & Linux Ubuntu. I know about Wubi to install Ubuntu within Windows, But would like more space than the 30gb limit that Wubi uses. How do I create an partition with Windows that can be used for a dual-boot. doctorwhovian11-24144041650249291689021989539000 has chosen the best answer to his/her question. Click here to view the answer that was selected.
View 5 Replies
View Related
Feb 1, 2012
I'm helping my brother to set up a dual-boot of Windows 7 & Windows 7. The reason for this strange setup is because my brother wants to have his own Windows 7 system, separately from his son who keeps causing trouble with trojans/viruses & online games. I have several questions before I do this. What is the fastest way of installing the OS twice with some basic applications on it? Is it possible to just re-image the first installation to the 2nd partition & make some changes on it to avoid reinstalling everything twice? It would save time a lot. But then, what changes should I make to the system to make it dual-boot? Will that be complicated or even possible?
View 5 Replies
View Related
Dec 2, 2012
0x8004240F. I encounter this error for the very first time and it happens when I try to make a new partition to install Windows 7 on it using Windows 7 installer (not disk management!) The hard disk has a legitimate Recovery partition of HP (which was active and primary) and another data partition. It has 40 gb of free space. Even if I select like 1 or 10 or 20 gb it still gives 0x8004240F error. I made several commands (after installing Windows 7) like bootrec /fixmbr /fixboot /rebuildbcd and they didn't detected the Win 7 I managed to install BUT I made it's partition in Acronis Disk Director suite. After each restart Windows 7 wanted to start chkdsk on drive C (the Win 7 drive) automatically.
Also the system thinks there is an older version of Windows but there isn't. The partition I created with Acronis was reported Primary in acronis, but in Win 7 installer it was reported as logical... Currently it is reported as Extended. Paragon partition manager reported that some partition overlaps another and this must be the key to solving the problem. But why fixboot and fixmbr didn't worked? I even tried them on the other data partition. I haven't modified the Recovery partition only made it hidden and not active. How to check the partition table for errors and fix them so Windows 7 won't get this error?
View 1 Replies
View Related
Jan 19, 2013
Though there is 200 GB space available in my C drive I cannot create a disk partition using disk management , i am getting the available shrink space to be zero when I click the shrink volume.. but I do have free space..My system is Dell Vostro 1440.. How should I make the partition now?
View 1 Replies
View Related
Sep 3, 2011
partition windows 7 home user without formatting the data?
View 3 Replies
View Related
Sep 11, 2012
I installed two new 120GB SSD drives into my system. Previously, I had two 1TB drives in a RAID 0. After doing a performance test to see if there was a speed increase, I also bound the two new 120Gb SSDs into a NEW RAID 0.The idea was to use the new, faster array for windows, and whatever programs I am currently using, and then use the old array for storage. I could install windows on the new drives with So, I proceeded to install Windows 7 on the new array, leaving the old array alone. Installation went without a hitch. I looked at my new drive under My Computer- 1.98 TB. NOT the 240GB partition I just made, and NOT the 1.74 TB partition I used before the new drives.It, for some reason I cant fathom, combined all 4 drives, encompassing BOTH arrays, new and old HDD and SSD into one partition, and had installed windows OVER TOP OF ALL MY DATA.I dont know WHY this happened, but what do I do now to get my data back? I tried starting the computer without the new array, but it wont boot. I need my data back, and I need to get windows installed on the new array, the way I wanted.
View 4 Replies
View Related
Jun 21, 2011
I am on my grandparents desktop, and they recently had me dual boot Windows 7 onto their Windows XP machine, and they now no longer need XP anymore. The XP partition is listed as a System, Healthy, Active, Primary partition. The 7 partition is listed as a Boot, Active, Healthy, Logical partition. How can I delete/format the XP partition and make the Windows 7 a primary partition? I have tried by using Disk Manager, and Eauseus Partition Manager, but it won't let me convert it to primary, or format the XP partition.
View 14 Replies
View Related
Feb 15, 2013
No install disks, no manual just letter telling me to protect customer data entire drive was wiped clean including Recovery partition. Checked disk management it shows all 4 primary partitions used: 200mb (boot), 169gb (C drive), 281gb (D drive), 16.5gb Recovery partition. I tried F9 when booting (nothing) just boots into OS. This setup is completely useless to me. Called Asus ($50.) for install disk they said call Microsoft, call Microsoft ($99. new disk) they said call Asus, I've already paid for Win 7 once and i'll be damned if I pay for it again. Typical corporation bullshit.What I want to do is install Win 7 on 1st part, 2nd (shared NTFS part), Ubuntu on logical partitions.
View 5 Replies
View Related
Oct 11, 2011
Is there any way, I can make data in Micro SD card not copiable and not transferable to other devices
View 3 Replies
View Related
Oct 26, 2011
I currently have a 500GB SATA drive with 2 partitions, C: has Vista Ultimate in it and most of my (Really Important) data is in D:- I do not have an external drive with enough space to back up both partitions, only C: -- If I install Windows 7 on C:, will I also lose all the data in D: (Partition 2)?I want to be 100% sure I won't end up with data loss on D: if I do a clean install on C:
View 11 Replies
View Related
Jan 16, 2011
I am thinking about dual-booting my system with Windows 7 as the main OS, and linux ubuntu as a secondary. I have a few questions:
1. How much space should I leave for ubuntu's partition?
2. How do I make a swap partition (or whatever it is called, for swapping files between OS's)?
3. Can I set it up to automatically boot into windows unless I am holding down a specific key, or something similar?
BTW, my HDD is ~500gb, but my current (factory) windows partition is 450gb.
View 9 Replies
View Related
Dec 2, 2012
I'm doing a clean install of windows, I want to know if it's possible to back up my data using a HD partition
View 4 Replies
View Related
Dec 30, 2009
I just installed Windows 7 Ultimate 64-bit and saw that the users private and public data are still saved in the C:Users of the system partition.
So, I'm looking for a specific guide for Windows 7 that separates the system partition from the users private and public data, saved in another partition on the same disk. In addition, private data created during the creation of new accounts (including the Administrator account) must be saved directly in the other partition.
In other words, in the C:Users directory, the All Users, Default and Default User directories must only remain and its must to be fully functional.
View 9 Replies
View Related
Aug 11, 2009
I have somewhat the same problem as this guy has:
http://windows7forums.com/windows-7-installation-upgrade/14819-c-drive-no-more-visible.html
I read that you guys might need the Diskmgmt information in his topic so here it is:
I had the RC which was dual-booting fine alongside XP. Then I got the RTM, burned it, booted up with it, deleted and formatted the partition on which 7 was (which was the C drive) and installed the RTM.
When I did this I noticed that the os selector had disappeared. So I installed EasyBCD to try to fix the boot-loader but I think I messed up in this stage.
Cause when I tried to boot in XP, I got the "Error loading operating system".
Tried some things to fix it, (which involved reinstalled 7 again just to boot up in it to try to fix the boot-loader), didn't work, gave up.
Put in the XP cd, deleted the XP and 7 partition, and created a new 100GB partition and installed XP on it. ( My 400GB Data partition was still visible and accessible in this stage).
Then I put in the 7 dvd, booted it up, created new 100GB partition out of the leftover unformatted space, and installed it.
No problems during installation, computer rebooted, I got the nice boot-loader screen with the "Earlier version of windows" and "Windows 7" option. Everything still ok, boot up Windows 7 and there I notice that my Third partition, with all my data had disappeared! =S
I'm thinking with is this, I reboot into XP, and there it has vanished as well! What should I do now? I want to get at-least the Data back, I don't care if I have to format my entire drive again and install XP and 7 all over.
View 6 Replies
View Related
Aug 19, 2012
i resized my my C: partiton and it is my main partiton usin Partiton manger and since then it is not bootable and windows is not loading although i didnt format
View 1 Replies
View Related
Aug 8, 2012
I was wondering if it's possible to make a restore partition in my HDD? Just like the laptops now that come with the restore already built into the drive, any way of doing this?
View 2 Replies
View Related
May 21, 2009
At the end of each semester, I typically restore my primary laptop (Asus G1S) to the factory default settings. I realize that this isn't technically necessary, but there's something psychologically pleasing about a freshly installed operating system. It's somewhat like returning to a hotel room in the afternoon after the maid has tidied up. The bed is made, the bathroom is stocked with clean towels, and the free water bottles have been replenished.
I'm currently downloading the Windows Seven installation files, and have been reading through various guides. Many writers recommend partitioning one's hard drive to permit a dual boot. However, since I've just restored my system completely, I would rather just turn the entire thing over to Windows 7 without any Vista remnants clogging up the machine. If things go south, I can always unpack the restore disks and revert to the factory default state.
Is this advisable and possible? Can I completely wipe out Windows Vista and turn my machine entirely over to Windows 7?
View 3 Replies
View Related
Jul 20, 2012
I want to make 3 partitions. The first one will contain Windows 7, the seond one xp, and the third ubuntu.
View 7 Replies
View Related
Oct 31, 2012
I have an HP pavilion dv6 that came with windows 7 64 bit. But I'd like to install Windows 8 on a separate partition. I tested this out on another computer and was able to successfully make a bootable partition and run both windows 7 and windows 8. But when it comes to my dv6 I'm having issues. At first I found online that a dynamic partitions can't install windows and that only 4 partitions max per drive. Did some more searching and found out that I could just delete my hp_tools and recovery partitions after I make a backup. And even though I did that, I still get dynamic partitions. Keeping me from installing any other os.
View 3 Replies
View Related
May 7, 2009
i have a netbook with 160gb.
Xp is pre installed on this machine.
I made a new partition of 25gb to install Windows 7 on (from a usb-stick).
The installation screen starts up oke, but when i start the install and select the 25gb partition i get the message that it's not a system partition.
So now my question, how do i make it a system partition?
View 2 Replies
View Related
May 14, 2011
i use window 7 Ultimate Edition , i have two Partitions in 320 HDD, d drive is encrypted by bitlocker. after some time i access this drive its give me wizard , drive is not formated. i formated the drive. after that my data is lost.
View 2 Replies
View Related
Oct 25, 2012
Ive bought A lenovo g580(?) with 7 pre installed. There is four partitions preinstalled on the hdd. I've understod that You can not delete any of these, in order to keep the recovery system working. Four partitions is the Max number of such.Is it possible to Get an extra data partition?If not, should i store my user data on c? What if win7 crashes,then i Will loose everything on c
View 9 Replies
View Related