I have been getting these BSOD errors about 5-10 minutes after logging on to Windows. I have Blue Screen View and it says the BSOD was caused by ntoskrnl.exe.
CRITICAL_OBJECT_TERMINATION
Stop code: 0x000000f4 (00000000`00000003) (fffffa80`047b9220) (fffffa80`047b9500) (fffff800`04584510)
I have Windows 7 Home Premium 64-bit
emachines ET1831
8Gb RAM
Intel Celeron CPU 420 @ 1.65GHz
320Gb Hard Drive
When I tried logging in this morning I got a BSOD saying "PAGE_FAULT_IN_NONPAGED_AREA". It kept happening after rebooting so I used system restore and that went away. But then I got a BSOD saying "a clock interrupt was not received on the secondary processor". This happens either right when I log in, or within about 10 minutes. I've been in safe mode for about an hour and it's been okay. I ran memtest86 for a few hours but there were no errors. I also cleared the CMOS.
View 1 Replies View RelatedI get these random BSODs when I log into my PC, it doesn't always happen but it happens alot. Also in that time my PC runs as if it were opening 50 Programs at once. I have my Minidumps attached. (Also the crash does not occur in safe mode, just in normal mode).
View 6 Replies View RelatedI have a HP Pavillion DV6 laptop. Whenever I turn my laptop on and log on, a few minutes after logging on it freezes. Cant access anything, have to restart it. When turning on I gave it a scan by pressing escape and on the HP checks, the hard disk check it failed. Tried going into command prompt and doing chkdsk /f but get what's shown below.Checking file system on C:The type of file system is NTFS..One of your disks needs to be checked for consistency. You may cancel the disk check, but it is trongly recommended that you continue.Windows will now check disk.Cannot open volume for direct access. Autochk cannot run due to an error caused by a recently installed software package.Use system restore feature from the control panel to restore the system to a point prior to the recent software package installation. I can get into safe mode but that's all I can do.Would it be a good idea to reinstall windows, although I did it not that long ago (in the last two months or so) ? Or is there any programs that could save a hard drive. I really don't want to buy a new one. I've bought the laptop in Summer 2010 so its not too old. Although I think the vans sound quite loud and it overheats quite often, but I cannot take it off to get to them.
View 4 Replies View RelatedI have Windows 7 on my laptop and after I start it up and enter my password to login to windows I have to wait another 10-15 minutes for my desktop to appear. It's just a black screen, but the kicker is that I can move my mouse and see it on screen.
View 1 Replies View RelatedI built my computer about 1.5 years ago and I've never had a problem with it until yesterday. When I was playing a computer game my Windows 7 Ultimate x86 froze for 1 sec (during that 1 sec the display on screen turns all "glitchy"). Imminently after the Blue Screen pops up and I have typed out what the it says beblow. Now everytime I start up my computer and log into windows (my computer takes a little longer than usual to boot up now) the computer shuts off 5-10 minutes and shows the blue screen again.
View 5 Replies View RelatedI keep getting BSODs when using this computer. Often it would crash right after logging into windows and this is fairly consistent. Other times, it would crash while using windows. I am using an SSD with a HDD as a mass storage.
View 9 Replies View RelatedMy Laptop recently can't load start-up applications and getting multiple errors as I log in. Most of the time before I can do anything, the Laptop goes BSOD or just restarts because of system failure and does the same thing again. Mostly the error occurring is 0xc0000185. And explorer.exe crashes everytime as the taskbar appears or try to do something. I already experienced this problem before but it disappeared when I repasted my CPU and GPU.
View 4 Replies View RelatedI keep getting a BSOD every time I log into my desktop and I'm not sure what the problem is. It works on safe mode, but that's about it. I think this folder may contain the dump files which I got by running the desktop on safe mode: Attachment 233731
View 1 Replies View RelatedI built my first computer almost two weeks ago, and it worked just fine for a while, but now it repeatedly gives me a blue screen whenever I try to log in. Sometimes it happens after I type in my password and press enter, sometimes while I'm typing it, and sometimes when I just hover the mouse pointer over my user icon.
I attempted the System Health Report like the BSOD thread instructed, but that generates an error: The system cannot find the path specified.
64-bit Windows Professional Full retail version System age and date of OS installation is 12 days.
I've been getting BSOD for a while now. I bought my computer a couple of months ago. It was fine for the first couple of months but for the past couple of weeks, usually when I'm playing a game, I would get randomPage Fault in Nonpaged Area BSOD. Some days I dont get it at all but others a few times. Today out of nowhere I got it while browsing the web. Now every time I boot my computer and log in I get the BSOD. Restarted about a dozen times, same thing. By no means am I a computer Wiz but I checked the hardware, it seems to be fine. Updated all drivers. Tried to even log into a different User. Used System restore.
View 9 Replies View RelatedWindows 7
4gb ram
gforce 470gtx
I tried to install Max Payne 3, but in the ending of installation my PC just freeze and restart. I didnt know what is wrong, so i tried to install new DirectX, newest GPU drivers and so. But problem was still same. After that all, my pc just start freezing after a few minutes on desktop and begin autorestarting.I tried to uninstall GPU drivers in Safe Mode, but theres same problem. Also I tried to use "last good known condition" but problem is same.I also used MemTest, 2x pass, no errors, and also no errors in HD Tune..
Almost as soon as I log in to my laptop it crashes. I can use safe mode and I keep my malwarebytes updated so I am unsure as to what could be happening. Here is the data dump:
Bug Check String- KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code- 0x0000001e
Parameter 1- ffffffff`c0000005
Parameter 2- fffff800`03506045
Parameter 3- 00000000`00000000
Parameter 4- ffffffff`ffffffff
Caused by Driver- ntoskrnl.exe
Caused by Address- ntoskrnl.exe+7cd40
Windows 7 x64 Fully updated. System has passed 8 hours of memtest with no errors. Have run CHKDSK /F on all the drives. When I hit shutdown or log off about once every 3-5 days I get this BSOD ntkrnlmp.exe
View 9 Replies View RelatedI keep getting the system I just upgraded from originally using Vista home premium 32 bit to Windows 7 Home premium 64 bit, Yes I did wipe the hard drive and I have reinstalled the OS multiple times to try and navigate around this problem.
Specs:Processor: Intel Core I5-2500 3.3 GHZ
MOBO: ASUS P8H67-V
Ram: 4-gb Crucial (2x 2gb)
PSU: Antec 650 watt earthenwatts
HD:ST3360320AS ATA device 326 GB
OS: Windows 7 Home premium 64 bit, Brand new disk just got yesterday
I just bought a new Dell laptop 6 weeks ago. The laptop is running Windows 7 Home Premium 64bit, Original Install, OEM.
About two weeks after purchasing the laptop Windows startup recovery would run every time I turned on the laptop. Just a few days ago the I started getting the BSOD after logging in to the desktop. If I try to start an application immediately after logging in, I won't get a BSOD. If I log in and leave the latptop unattended I get a BSOD.
I've just installed the full retail version of Windows 7 64bit and am having regular BSOD crashes and 'Recovered from a serious error' messages. Hardware is 1 year old (Intel DH67GD) i2500K, 12 GB RAM).
View 9 Replies View RelatedI have recently built a computer with the following components:
Asus 990fx Sabertooth motherboard
Zambezi 6-core Am3+ cpu
16 gb g-skill ram
180 Gb SSD
1 TB 7200 rpm HDD
2 MSI GT 560's
Every time I go to install Windows 7 it seem to be getting a different error. It will get to various stages of the install (ex, i can click on the language settings and the install button and then crash, or it will get to expanding files and crash, or it wont even get to the language settings page) The BIOS runs fine and recognizes my RAM and my CPU. How I can install windows 7.
Just kind of confused about the BSOD errors. Just installed Windows 7 last night to this laptop and I immediately started getting them. I tried getting debugging tools to read the .dmp files, but that just wasn't working. Then I tried working with BlueScreenView and I accessed all the .dmp files that I've acquired, six in total. Each seemed to have different files highlighted red, though I noticed one file that all of them had been highlighted red; NT Kernel & Systems. My only guess to fix this problem would be to just reinstall Windows, or would there be an easier way to fix this problem?
View 2 Replies View RelatedMy laptop is BSOD'ing at random times and seems to throw up different reasons. The most popular seems to be Memory Management & Driver IRQL Equal or Less errors. My laptop is an Acer Aspire 5750 Running windows 7 64bit.
View 9 Replies View RelatedWife was playing Lord of the Rings Online on the PC while I was at work and got a BSOD twice within 20 minutes. In the past month I have installed an SSD and upgraded my RAM, but I'm REALLY hoping that's not the culprit. Could I get some help making sense of the minidumps (attached)? I'm currently posting from the affected computer:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, Intel64 Family 6 Model 15 Stepping 11
Processor Count: 4
RAM: 6074 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 60954 MB, Free - 18691 MB; D: Total - 715402 MB, Free - 123497 MB; E: Total - 715402 MB, Free - 233996 MB;
Motherboard: Intel Corporation, DP35DP
Antivirus: Microsoft Security Essentials, Updated and Enabled
PSU: LOGISYS Computer PS650U12 650W ATX12V / EPS12V SLI Ready CrossFire Ready Power Supply
Getting this BSOD when starting it up in the morning. Afterwards the computer runs normally.I've tried to enable creating minidumps, but 3 days in (and 3 bsod's) it hasn't created one yet.I've copied info from the BSOD and Event Viewer below. Please let me know if any more info is needed.-Technical Information from the BSOD below: Code: *** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA00E399B30, 0xFFFFFA800E399E10, 0xFFFFF80002F935F0)
View 9 Replies View RelatedI have recently been experiencing a BSOD everytime i startup (in normal or safe-mode) around 40-50 minutes after startup. It seems to just shut down every program then go to BSOD while is able to create a dump file but never automatically restart.I've also used spy-bot and Malwarebyte to find any corruptions or viruses and nothing fixed the problem. I've google'd and couldn't find anything to my predicament from other BSOD's. I personally think it's the RAM going bad (this is a built computer by a friend about 8 months ago, top of the line gamer computer, windows 7 ultimate).
View 7 Replies View RelatedWindows 7 Home 64 bit2010 original software on latoI keep getting the BSOD in normal mode after a few minutes of starting my laptop. It is giving me the error PAGE_FAULT_IN_NONPAGE and it is saying that it is caused by driver "ntoskrnl.exe" I have attached the dump and system report
View 1 Replies View RelatedHappens no matter what I do, tried a fresh windows install and I still get it. This started happening after a lightning storm so Im guessing they're connected
View 1 Replies View RelatedI am facing this error after every 5-10 after restarting pc.I am attaching files created by SF Diagnostic Tool - Using for Troubleshooting..
View 1 Replies View Relatedi've been having bsod on win 7 for over a week, i have had these problems previously, win 7 32bit to 64bit reinstall worked last time. this time i have tried installing win 8 pro 64bit to separate ssd drive. clean install, also having similar issues. i've started debugging some of the dumps. a few have pointed to avg and the gpu. i uninstalled avg and used driver sweeper to remove video, sound and ethernet drivers. this had only made the bsod take slightly longer to happen. sometimes the are happen under load (utorrent and playing bangbang racing), other time just Internet, and even while idle(just utorrent). i have stress tested the gpu, cpu, and run check on ram and hdd. i am leaning to faulty motherboard but i don't want to fork out for a new one until i cam be 100%.
View 2 Replies View RelatedI've tried updating drivers and such. My next step is a full reinstall.After the initial crash it seems to randomly BSOD unless I attempt to run windows update which nearly always kills it.
View 8 Replies View RelatedI have a fairly new computer (14 months) that never gave me any problems until recently. My computer will 100% freeze after roughly 10 mins of use (doesnt matter what i do in the 10 mins). I'm running windows 7 home 32 bit, i5 quad core (cant rmb alot of details, will dig up more soon), asus p8p67 mobo, wd 1tb green and 4gb ram.
The only way to "unfreeze" my computer is to restart it, if i leave it as it is without restarting I'll get a BSOD that says "KERNEL INPAGE DATA ERROR"
error code: STOP: 0x000000F4 (0x00000003, 0xA16DE4E0, 0xA16DE64C, 0xE3060200)
I continue to get random BSOD just after start up (usually within 10 minutes) then they come occasionally after that. I have reloaded Windows and still have this issue. I believe this is a driver issue, but I'm lost. Have tested memory several times - no problem detected.
View 2 Replies View RelatedThe system seems stable just being on, and the minute I turn it on, I get the BSOD.This is a Gateway T-1631 laptop that use to have Vista. I upgraded to seven, but wiped the computer out to have a fresh install. Ever since the fresh install, it hasn't been working right and crashes consistently.
View 4 Replies View Related