I keep getting BSODs when using this computer. Often it would crash right after logging into windows and this is fairly consistent. Other times, it would crash while using windows. I am using an SSD with a HDD as a mass storage.
View 9 RepliesI built my computer about 1.5 years ago and I've never had a problem with it until yesterday. When I was playing a computer game my Windows 7 Ultimate x86 froze for 1 sec (during that 1 sec the display on screen turns all "glitchy"). Imminently after the Blue Screen pops up and I have typed out what the it says beblow. Now everytime I start up my computer and log into windows (my computer takes a little longer than usual to boot up now) the computer shuts off 5-10 minutes and shows the blue screen again.
View 5 Replies View RelatedI have been getting these BSOD errors about 5-10 minutes after logging on to Windows. I have Blue Screen View and it says the BSOD was caused by ntoskrnl.exe.
CRITICAL_OBJECT_TERMINATION
Stop code: 0x000000f4 (00000000`00000003) (fffffa80`047b9220) (fffffa80`047b9500) (fffff800`04584510)
I have Windows 7 Home Premium 64-bit
emachines ET1831
8Gb RAM
Intel Celeron CPU 420 @ 1.65GHz
320Gb Hard Drive
When I tried logging in this morning I got a BSOD saying "PAGE_FAULT_IN_NONPAGED_AREA". It kept happening after rebooting so I used system restore and that went away. But then I got a BSOD saying "a clock interrupt was not received on the secondary processor". This happens either right when I log in, or within about 10 minutes. I've been in safe mode for about an hour and it's been okay. I ran memtest86 for a few hours but there were no errors. I also cleared the CMOS.
View 1 Replies View RelatedI keep getting a BSOD every time I log into my desktop and I'm not sure what the problem is. It works on safe mode, but that's about it. I think this folder may contain the dump files which I got by running the desktop on safe mode: Attachment 233731
View 1 Replies View RelatedI built my first computer almost two weeks ago, and it worked just fine for a while, but now it repeatedly gives me a blue screen whenever I try to log in. Sometimes it happens after I type in my password and press enter, sometimes while I'm typing it, and sometimes when I just hover the mouse pointer over my user icon.
I attempted the System Health Report like the BSOD thread instructed, but that generates an error: The system cannot find the path specified.
64-bit Windows Professional Full retail version System age and date of OS installation is 12 days.
I get these random BSODs when I log into my PC, it doesn't always happen but it happens alot. Also in that time my PC runs as if it were opening 50 Programs at once. I have my Minidumps attached. (Also the crash does not occur in safe mode, just in normal mode).
View 6 Replies View RelatedI've been getting BSOD for a while now. I bought my computer a couple of months ago. It was fine for the first couple of months but for the past couple of weeks, usually when I'm playing a game, I would get randomPage Fault in Nonpaged Area BSOD. Some days I dont get it at all but others a few times. Today out of nowhere I got it while browsing the web. Now every time I boot my computer and log in I get the BSOD. Restarted about a dozen times, same thing. By no means am I a computer Wiz but I checked the hardware, it seems to be fine. Updated all drivers. Tried to even log into a different User. Used System restore.
View 9 Replies View RelatedAlmost as soon as I log in to my laptop it crashes. I can use safe mode and I keep my malwarebytes updated so I am unsure as to what could be happening. Here is the data dump:
Bug Check String- KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code- 0x0000001e
Parameter 1- ffffffff`c0000005
Parameter 2- fffff800`03506045
Parameter 3- 00000000`00000000
Parameter 4- ffffffff`ffffffff
Caused by Driver- ntoskrnl.exe
Caused by Address- ntoskrnl.exe+7cd40
Windows 7 x64 Fully updated. System has passed 8 hours of memtest with no errors. Have run CHKDSK /F on all the drives. When I hit shutdown or log off about once every 3-5 days I get this BSOD ntkrnlmp.exe
View 9 Replies View RelatedI keep getting the system I just upgraded from originally using Vista home premium 32 bit to Windows 7 Home premium 64 bit, Yes I did wipe the hard drive and I have reinstalled the OS multiple times to try and navigate around this problem.
Specs:Processor: Intel Core I5-2500 3.3 GHZ
MOBO: ASUS P8H67-V
Ram: 4-gb Crucial (2x 2gb)
PSU: Antec 650 watt earthenwatts
HD:ST3360320AS ATA device 326 GB
OS: Windows 7 Home premium 64 bit, Brand new disk just got yesterday
I just bought a new Dell laptop 6 weeks ago. The laptop is running Windows 7 Home Premium 64bit, Original Install, OEM.
About two weeks after purchasing the laptop Windows startup recovery would run every time I turned on the laptop. Just a few days ago the I started getting the BSOD after logging in to the desktop. If I try to start an application immediately after logging in, I won't get a BSOD. If I log in and leave the latptop unattended I get a BSOD.
I would like to know if there is a way, when you start up your PC, so that windows would log you in automatically without you having to click on your user account everytime. There surely must be some registry fix/tweak for that? Security is not an issue for me, don't use a password anyways.
View 1 Replies View RelatedI have tasks that I need to keep running while I am away from the computer and they are getting locked up and not running everytime Windows 7 logs me out after 10-15 minutes or so.
how to stop Windows 7 from automatically logging you out? So I can stay logged in?
I would like to stop or prevent my pc from logging me out when i connect to it with my android phone, is this possible? The application I am using doesn't require me to install anything on my pc and it works over wifi
Android phone: HTC evo 4g
RDP application: Remote desktop client
After I login my computer freezes. My mouse works but it looks like the CPU is thinking. Sometimes I can start in safe mode but others it freezes on the black screen as it is loading. When I stArt in safe mode everything seems to work fine. I have run a virus scan (avg free) and another with eset online scanner and deleted/quarantined found threats. I am running windows 7 premium 64bit.
View 8 Replies View RelatedI have multiple issues that have all cropped up in the past few days. I will try to list as much as I can and as much as I remember doing.I have Windows 7 Home Premium 64 bit running on a Toshiba Satellite L500-1WG. I have had no apparent problems until now. I used to run Kaspersky internet security (free package from online banking) but it wouldn't allow some facebook games to run so I disabled it and used Avast. Avast found a virus in a temp folder upon first quick scan (Win32:Malware-gen) and transferred it to the virus chest on 23.02.11 with a 'last changed' date of 21.12.2010 (was it on there that long and not found by Kaspersky?!?!)Anyway, all good until a boot time scan on 10.05.11 (first one I had run after figuring out what it was) and it found 2 viruses that I hit delete on rather than move to chest - Java:Agent-DI [Trj] and Java:Jade-A [Heur] both in LocalLow Java cache folders. Since then I have had nothing but problems, although I think my trying to do bits and pieces may have had a hand in it too.
I turned Kaspersky back on to do a scan and it didn't find anything except an android rooting thing that it deleted (downloaded but unused). I also tried Malwarebytes after seeing so many recommendations and it has found nothing (I disabled the other antiviruses as I know I had too many but not sure if that is enough or should they have been uninstalled completely?). My Event Viewer has LOTS of errors, warnings and possibly worrying information logs and then I tried turning off some unnecessary start up programmes. I think that is all I have done...When I tried turning it on the other day it kept stalling and freezing and so I turned it off for a day or so. Yesterday I turned it on, it started up fine to the log on screen and once I entered my password I got a black screen with only the cursor. It stayed like this. Today I tried again and it was the same. A few hours later I tried again and after about 5 mins of black screen it loaded up but the wireless wouldn't work. I started it in safe mode and it starts fine. I set it to start up in normal mode and it started but was running extremely slow.
I took my computer completely apart to clean it, put it all back together, fresh install of win 7 and now its giving me issues. when booting, it will hang right after the windows logo pops up, or it will let me login, then after a while either freeze, or the screen will go black and i will have to hit the reset button. it will either have me boot normally or go through the startup repair, that does nothing.
View 7 Replies View RelatedI would like to know if there is a way, when you start up your PC, so that windows would log you in automatically without you having to click on your user account everytime. There surely must be some registry fix/tweak for that? Security is not an issue for me, don't use a password anyways.
View 4 Replies View RelatedMy windows 7 hangs up after logging in. In safe mode with networking, it is running perfectly. I have had this problem intermittantly, and the last times I got a message that my video driver as stopped working and is recovering. My computer would work fine for about a month or so and then it would happen. I have downloaded latest drivers from nVidia, and have also disabled everything except Microsft items on Startup.The errors I get in the event log is as follows :DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server:{7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}DCOM got error "1084" attempting to start the service ShellHWDetection with arguments "" in order to run the server:{DD522ACC-F821-461A-A407-50B198B896DC}DCOM got error "1084" attempting to start the service EventSystem with arguments "" in order to run the server:{1BE1F766-5536-11D1-B726-00C04FB926AF}The driver detected a controller error on DeviceHarddisk3DR3.The following boot-start or system-start driver(s) failed to load:
discache
spldr
Wanarpv6
The following boot-start or system-start driver(s) failed to load:
AsIO
AsUpIO
discache
spldr
Wanarpv6
I performed a clean boot by disabling everything except microsoft stuff at startup. The item I eliminated was adobe reader speed launcher. I can not see it in my programs or features so I can uninstall it. With it disabled..my computer stopped hanging.
I am really curious how to disable Windows logging. I was reading something on Wikipedia about privacy and security; and came across something interesting that I cannot find much about on Google. It stated that "many programs and operating systems are set up to perform data logging of usage". For example, this might be recording the times when the computer was in use, or some applications we use on Windows. Whoever wrote the article stated that its possible to disable Windows logging - but my question is - is it?
View 1 Replies View RelatedI am tryin to add my windows 7 clients to windows 2008 server. I created the new user accoutns. I added the new user accounts to the domain and they added fine. ( first.lastname.domain).Our network admin then change the domain account first.lastname.domain2then went to local account 'firstname' and renamed it to match the domain went to log back in to domain account and it keeps logging m
View 1 Replies View RelatedSo I've been upgrading a few computers to Windows 7 Ultimate and after a fair bit of wrangling, managed to get them all taken care of (except who knew that Windows 7 Home couldn't access a simple network wtf?).But I've got my boss's brand new rig all set up and loaded with all the software necessary, but for some reason, I can't get it to log in to the server for the life of me.
View 3 Replies View RelatedTyping the user name "administrator" automatically sets it from domain to local. My question is, is there something I can change, such as the registry or user profile so that a different account (such as larry) does the same as administrator, which is automatically change from domain to local upon typing the name in the user field?
View 1 Replies View RelatedIs there any way to activate the Administrator account without being able to log into Windows 7?
View 1 Replies View RelatedI would like to know how to stop my computer from logging me off when idle. I have disabled all other power options. I am trying to see if the system Watchdog_timeout errors and other BSODs are caused by the power management portion of Windows 7.
View 1 Replies View RelatedI just bought this about two hours ago. If even that long. & it seems that when my built in webcam is turned on if I don't take pictures routinely it logs me off. It only happens when the cam is on. Is there a way to stop this? I'm trying to play around with the options and what not but its quite difficult to do when the computer keeps logging my account off. Its Windows 7 Home Premium 64 Bit. Its made by HP. The box says "Pavilion dv5. dv5-2074dx."
View 3 Replies View RelatedAfter turning on my computer today, I noticed that the "shut down" icon in start menu had the familiar triangle referring to updates. I closed things down and selected it to "Shutdown and install updates". I keep my Windows as up to date as i can, so this was a recent update.
The problem is that upon starting the computer, I could get to the log in screen with both the Administrator and user accounts visible, but when attempting to select either one to log in, the screen flickers black once for a half-second, then kicks me back to the user select screen. How can i undo this last update without logging in? I tried inserting the windows disk to use the system restore feature, but it claims that "No restore points have been created on your computer's system drive" yet as far as I've seen, each update has been initiated with a "creating system restore point" loading bar, so how can this be? I've attempted logging in in safe mode as well. The same black screen, it just took longer before I got kicked back.
Or additional information I can provide?
Edit - If possible, does anyone know of a program or command that can bypass the log in screen and immediately log in? Maybe if I could do that and get into the system itself, I could undo the upgrade on my user account.
Say my system freezes and I have to press the power button to turn it off... when I log back into windows, all websites have forgotten me
View 7 Replies View RelatedMy laptop getting logged off while taking internet, otherwise its working fine,
View 1 Replies View RelatedI have a new Desktop with Windows 7. After I start the computer and leave it running for a while, (10 to 15min), it will automatically revert to the password screen. Also it won't go to screen saver. I have the screensaver set to not require password after waking. Also I have my power settings set to high performance. Also i have my Nic card configured so that it isn't allowed to be turned off.
View 1 Replies View Related