I have a compaq laptop cq62 255nr with win7 home. I made a bootable USB stick iso of win7. I have 4 partitions on my hdd. 1st is system. 2nd is C. 3rd is D/recovery. 4th is hp tools. Should I format the entire thing first or just parts of it or leave it be and let the installation program handle it? This is the first time I've done this. I actually ran the setup.exe from the USB stick after the computer was already running. It asked where to put the OS. I specified "c" and left everything else in place, but I wanna know which is better...what I did or full format followed by booting from stick.
If I use a commercial software like Drive Scrubber to clean my HD, will a Win 7 Upgrade Discboot ? I want to eliminate any possible virus/malware. Is there any advantage to using commercial software to format, or is the reinstall format listed in the tutorials as effective? My concern is that Kaspersky Internet Security 2012 (KIS) had corrupted data bases and after removal and reinstallation did not perform well. I could not download anything, e.g. CCleaner and received Certificate Error questions on certain websites. Also, I would like a fresh registry to insure previous programs like Chrome, Firefox, KIS, remnants are eliminated.
I recently discovered I had a zero access rootkit virus on my laptop. I now need to format/reinstall my windows7.o I do not make any mistakes and to make sure I get rid of that virus.
my mothers computer got a few trojans and a bunch of other stuff so i downloaded the windows 7 iso file from microsoft site, mounted it onto a USB, deleted the partition, formatted it and successfully installed windows 7 again. Or so i thought...
- The only thing on the desktop is the recycle bin. Not that it matters too much, she wasnt using all the BS programs that came with the computer
- All the icon sizes real big, like an old school safe mode desktop
- Most important so far: Cant connect to the internet. The computer cant detect the wireless router as it dont have the drivers installed. Now the network of course works because im using it on my (Pardon my swahili right now) macbook.Now im old school (tried to find DOS to format type old school) and maybe i should have gone with the "restore to previous computer settings" option, but the bank that detected the trojan said format everything so i did. This option cant be used anymore.
I have a new laptop on its way and my friend suggested for me to to a clean wipe/format and then reinstall Windows 7 so that all the useless softwares that comes with the laptop can be deleted and I can have a fresh start with the laptop. So my questions are considering my situation, which would be better, to wipe or format? And what are the procedures for the doing so, and also reinstalling Windows 7?
I can't recover or install a fresh copy, error !disk is write protected or not enabled in bios ! i have checked and double checked , i can not find no password or any thing in the properties
I have 2 hard drives, an SSD for my OS, and a 2nd drive that I store all my files on. I had to do a reinstall this morning, and since I understand Windows 7 has issues installing sometimes when there's 2 discs connected, I disconnected the power and sata cable from my 2nd drive. So I install Windows 7, and it goes fine. I turn off the computer, plug the 2nd drive back in, turn the computer on and see the drive letter, but when I click on it, I get a message "You need to format the disc before you use it". I go into disc management and it's listed there as well, but the File System is listed as Raw.
Since Windows 7 only takes 15 minutes to install on the SSD I use, I decided to install it once again but leaving the 2nd drive connected this time. My BIOS recognizes that the disc is there, as does windows. It's just telling me it's in RAW right now, and I have no clue how that happened. Oddly enough I even made an UBUNTU disc and booted to that...but from UBUNTU that 2nd drive doesn't even show up, it only recognizes the existence of my primary hard drive.
who are skilled in Installing and Formatting Windows 7 Pro,My Computer is running in Windows 7 Professional 32BIT,after many months that I used my computer, I feel that my computer is in risk because some error/appcrash etc appear.Some .dll files can't be found when i open my PC.Even the antivirus is affected,my antivirus wont start in the startup when i open my PC,even if I try to scan my Hard Disc ,the antivirus wont run and it is not responding,even if I reinstall my antivirus or install new antivirus same problems are occuring. Because of this I decide to Format my PC and reinstall it again,My Hard Disk is a 500GB and it separated in two(Partition) The Local Disk C:and the Local Disk D:, The Windows 7 Pro installed in Local Disk C:,I decided just to format the Local Disc C: where the Windows 7 installed,I choose not to format Local Disk D:because my Important files are there. how to format the local disk C:and reinstall Windows 7 Again..
So I have Windows 7 RC installed on my computer still, and as we all know.What I want to do is simple, I want to reformat my hard drive, and install Windows XP Pro...which I own and have a product key for.When I put my CD in the drive and restart, I get the "Press any key to boot from disc" screen, I press a key, and it'll take me to the blue Windows Setup screen, and it begings to inspect my hardware.. and this is where the problem is (I haven't even began to install or make any changes to my hard drive and I get this lovely blue screen of death-type error: A problem has been detected and windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:Check for viruses on your computer.Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated.Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Now, I haven't have any changes to any hardware on my laptop ever.I ran chkdsk and it didn't find any errors, and it ran both a quick scan, and full scan. And I also ran some type of scan within Window 7 (right-click drive C, then "Properties", then "Tools", then something like "Scan drive for errors/bad sectors") and it also said everything was fine.Last night I sat down, backed up all the necessary data from my hard drive, and was looking forward to having a clean installed OS, and I can't even get it to install.
I have a Toshiba laptop that came with a preinstalled copy of Windows-7 (64 bit) version purchased in July 2010. No setup disk came with the laptop, but there is a "Toshiba recovery media creator" utility.
[1] What is the better option for formatting my drive? Should I use the Toshiba media-creator or install a clean version of Windows-7 from an ISO download (am I allowed to do that? If so, what is a good site to download?) There is a "sticker-certificate" on the bottom of my laptop with a product-key. Will it work with the new install?
[2] Do I have the option of installing a 32-bit version of Windows-7 instead of 64-bit with the above license? The reason is that most applications I use are 32-bit and hence a 32-bit OS is better suited for me. But does the license allow me to do that?
[3] (The tricky part) - Since I have a good 320GB HDD, I want to dual-boot by creating two partitions - with a linux distribution (Ubuntu/openSuse) running on the second partition? Assuming I don't have the option of clean-install, will I be able to create the extra partition for linux using the Toshiba utility?
I have an HP G62 laptop which came pre-installed with Windows 7. I would like to fully remove all data on the HDD and reinstall Windows 7.The 'Computer' section of the Start button shows the following HDD (not sure if these are partitions or not, but I'm assuming that they are!):
Local Disk ( C: ) Recovery ( D: ) HP_TOOLS ( F: )
I had a quick look at the D: drive and it showed a few setup files, all of which seem to be related to MSOFFICE. :-?I have been reading about data destruction programs that will absolutely wipe the drive and remove all data; I would like to do this and then reinstall Windows 7 so that the laptop effectively becomes a 'new' one.
1. How do I go about formatting the HDD with a data destruction program and then reinstall Win 7, since I do not have a bootable disc?
2. How reliable are such data destruction programs? Is there any margin of error? (I am a bit concerned about all the sensitive information that I have saved on my laptop such as bank details, family photos, etc.)
I am trying to format my hard drive and reinstall windows 7 as my hard drive is running out of memory tried removing some programs but is not doing much my hard drive is 232GB I only have 28GB left, how to format my hard drive.
My first install of Windows 7 was the update version. Now I'm having freezing up issues and want to do a fresh install. So my first thought was to format the hard drive, but it say that it has too big of volume. How do i get around that and do a fresh install? Any help is welcomed.
I have an HP G61 which was purchased from Pc World and having had 2 new hard drives with the later having software installed and now been given Recovery Disks.I want to remove/wipe everything on the hard drive and then use the HP G61 Recovery Disks to install the HP factory stuff and I presume Windows 7.I have read a thread which states you need to alter BIOS, I cant even find this on my PC.Then I want to install Windows Word & Excel etc, can anyone advise how I can install with no cost, hopefully downloadable.
I reinstalled Windows 7 here recently and when I did I formated my HDD do I need to reinstall my motherboard drivers? I have been having video stuttering ever since I reinstalled Windows and formatted my drive?
I recently reinstalled my windows 7 professional on my laptop after it began behaving strangely. I had backed up most of my files but I realised there was one folder residing on my desktop which I had forgotten.
It's time to format my hard drive. It hasn't been formatted since 2008 when it was bought and it's having some major issues.I made a system image. when i was installing it, I couldn't check the option to "get rid of the partitions and format the hd". It requested the drivers, asked me to insert the disc, but I don't have any disc with the drivers
Can I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
how i can format my pen drive if window 7 and XP is unable to format it. they are saying files are in use. i have kept window xp, photoshop and some other software in it. Now please tell me how can i delete these items or format it.
I have a few questions and one of them is, what is the difference between an unconditional format and a diskpart's Clean All in the command prompt. When I read their definitions online I don't know what they differ in.
