Email Accounts Wont Register On Network, Yet Work From Home?
Jan 16, 2013
The office network all of a sudden stopped access to a few email accounts, although they still had the same @ domain.Other email accounts still work which is strange. I tested the accounts from home and they work?The office computers are running office 2003-2010 so its not a problem with versions.All computers run off the same network which doesnt have a server or any external firewall. They all run off a home style network.
View 1 Replies
ADVERTISEMENT
Jan 14, 2010
How to Set the Windows 7 Network Location Type ?
View 0 Replies
View Related
Sep 3, 2011
I have TWO computers on a "home" network (Work group, NOT Win 7 Homegroup).Computer A is new and runs Windows 7 Home Premium. Computer B is "old" and runs Windows XP Professional. Computer A has two printers attached; Epson Stylus Photo R200 and a Lexmark X3690. Both of these printers work well with Computer AComputer B has an HP LaserJet printer on the parallel port LPT1. Computer A can print documents to the LaserJet on PC B as well as photos and documents to the Epson and Lexmark printers. Computer B can print to to the laserjet and the Lexmark BUT NOT the Epson.When I try to "add" the Epson to the printers on PC B there is a message that computer A does not have the correct driver for the printer. The same message occurred when I initially "added" the Lexmark to PC B, but I was able using the CD supplied with the Lexmark to located the 32bit driver and load it onto PC A.
I tried to do the same thing with the Epson but failed to find the driver on the CD. I have tried downloading a 32 bit Epson driver from the Epson site, (using compatability mode) but even after doing that I cannot add the Epson printer to Computer B - the same message that PC-A does not have the correct driver.
View 9 Replies
View Related
Nov 8, 2012
I hope someone can help me with this. I work from home (office is 70 miles away), and my Lenovo T420 Windows 7 will not stay connected via WiFi to my Verizon MI424WR ver I router. I had this problem with my old router (MI242WR rev E), and I was able to fix it by turning off the Power Management option to "power off to save power" My Lenovo is using Centrino Advanced-N 6205 Wifi chip. It reads as "working properly".
It seem obvious that there is an issue between the Lenovo and the new MI424. I have 10 other devices connecting to the MI424 without a problem. I have shut down devices to ensure that their is not an over burdening the AP issue.
Specifically, the Lenovo successfully pairs with the MI424, tries to establish an Internet connection, fails, and drops the connection (or the router does - I assume it is the laptop.) It's worked great for about 4 hours this am, then it quit working. I:
- shutdown the laptop, pulled power and battery
- shut off the network, pulled the plug and let it sit for a while
- restarted everything and the issue will not go away
It works fine @ work with a Cisco Network.
My company uses some McAfee SW for laptop security. Since I was blissfully working for hours and this just started up, I do not think that has anything to do with it.
View 1 Replies
View Related
Mar 17, 2012
I have Windows 7 Home Preimium and use a Logitech g35 headset. I use the headset as default for audio and speakers, and actually broadcast a Internet Radio Show with it weekly for the past number of years, as well as using it for other high end audio recording and voice overs. I have gone through the Wizard for the voice recognition and it refuses to register or see the microphone when it comes to reading the script. I have tested the microphone on Audacity and it records properly. Sound is working properly, just not being accepted by voice recognition.
View 1 Replies
View Related
Oct 11, 2011
How do I eliminate any email addresses I have in Accounts in Windows Live Mail and completely start Fresh in Accounts.
View 2 Replies
View Related
Sep 25, 2009
Is there a way to have windows mail live have all 5 of my email accounts in one folder rather having them separately and if i get mail in each account i have to down the menu to each account and open them up? I would like to have all of them in one inbox when i get mail like outlook and windows mail?
View 9 Replies
View Related
Jan 30, 2010
While away from home, can a pop3 account be accessed by live mail? I am with Shaw (Canada) and their online e-mail access sucks. I need to be able to download to my computer when away from home for extended periods of time.
View 6 Replies
View Related
May 24, 2011
I did the SP1 update on the weekend. I don't know if this is why this has happened but Windows live Mail, when opened, is now empty. All of my emails, settings, contacts and accounts are gone. I can see all the folders when I look under C:Users... but I don't know how to restore all of it.
View 1 Replies
View Related
Nov 24, 2011
I am trying to get way from the nightmare of Windows Live Mail 2011, mostly due to two bugs that are still in the latest version of the program.
I'm trying to migrate from WLM2011 to Outlook 2003 and I have run into a brick wall on importing my email accounts. Microsoft has extensive help pages on migrating TO Windows Live Mail, but apparently they do't think anyone would ever want to go FROM Windows Live Mail.
There is a good article at Migrate from Outlook Express or Windows (Live) Mail to Outlook | HowTo-Outlook which covers migrating the messages and contacts, but no one seems to have found any way to get your account data from WLM into Outlook. WLM will export the account data as iaf files (just like Outlook Express did) but Outlook doesn't recognize the iaf files.
I found a couple of old Outlook help pages that talk about importing IAF files, but the procedure shown does not work because Outlook doesn't ever give you any chance to tell it where to look for the IAF files, it just says "No internet accounts were found to import"
View 1 Replies
View Related
Oct 23, 2012
I use Outlook 2010 to process several email accounts. I noticed a few days ago that a couple of the email accounts had vanished from the list. I also noticed that one still present was not sending or receiving. I tried re-entering the password and when that didn't work I deleted and re-entered the account. It tests fine but the test message never shows up in my Outlook inbox. It does show up immediately on my phone when I check my mail there.
View 3 Replies
View Related
Oct 22, 2012
The Intel(R) 82579LM Gigabit Network adapter works about 40% of the time. The other 60% it says there is a hardware issue and it cannot connect. I then generally fiddle around with the ethernet cable ie unplug it plug it back in move it around again and restart. This sometimes works and I have no problems. Then when I restart my computer its a whole game on whether I can get it working again or not.
I have the latest drivers, and it is not a firewall/security issue.
View 3 Replies
View Related
Oct 16, 2012
I cannot succeed to create a POP3 email account that will download mail from my work server and from my Yahaoo mail account. Both are POP3 account and the message I get is login failed even that the name and password are correct. The firewall is not blocking the login attempt...
View 4 Replies
View Related
Mar 17, 2011
I have Windows 7 64-bit pro with Outlook 2010 installed on a Dell laptop. Is there a way to configure Outlook email to sync with my work email? Activesync works perfectly on my phone so that portion of the network is open at my work. I have been doing some reaserch and in order to get Outlook to sync with Exchange Server without VPN, RPC over HTTP or Outlook Anywhere must be enabled on the network. I know for a fact that our IT department have that portion disabled.
View 3 Replies
View Related
Feb 22, 2010
I am setting up multiple machines to run Windows 7 on my home network. I would like the users to have the same profile settings regardless of the machine they log into. Can user profiles be synced between machines within the same homegroup?If not, during the setup of the user, can I copy user preferences/profile settings so when they log in for the first time they don't have to reset everything?
View 4 Replies
View Related
Oct 8, 2012
5 month old Dell XPS 8500 Win 7 64 bit Pro as main computer connected by Wired Adapter, Upgraded Gateway 5632E also running Win 7 64 bit pro as second connected by Wireless. Both running Kapersky successfully. no network problems for 5 mo.
Both were successfully linked using homegroup. Had to take Gateway to a remote location to do a business demo. While there had to link to a local public WiFi. While connecting made mistake and left homegroup.
When Gateway returned to homebase a few days later it was fine, had no problems finding wireless but could not see or rejoin Dell machine homegroup. It would let me set up a new homegroup.
Went to Dell box and found 1) homegroup no longer existed, 2) router and network and wireless printing no longer found - Red X on the taskbar) even though internet was still working fine.
Took nearly a week of trying differernt fixes, on adapter- off adapter- different adapter reboot network, router, even updated router firmware (Yes I went through every ipconfig reset, renew, redecorate etc. I've used netsh functions to try to get evrything to reset. Changes services.msc settings per other posts. Finally in desperation, deleted every sub key in the registry related to network locational awareness and got the Dell to find the network, let me set it up as a "home" network and then even see the invitation to join the Gateway's homegroup.
Then I hit a wall- when I try to join- Win 7 says I can't join the homegroup because the network is not a "home network". Of course troubleshooting is useless and goes into an endless loop. Have searched in desperation for any way to make Win 7 return to a clean slate so it can sense that it really is on a home network without success. Applied the fix-it and hotpatch for when Win 7 gets stuck in public mode. No joy. Deleted the hide wizard subkey as suggested elsewhere. No Joy. Gut feeling says problem must lie in the NLA or peer networking somewhere but where?
Does anyone know of a method or set of steps (short of a clean reinstall of Win 7) to completely clear every thing the OS knows about my network and force it to acknowlege my network is a home network? Is there a registry hack that will clear the problem?
I know I could abandon the homegroup and do conventional file/print share but I am concerned that using that solution won't last as whatever is screwing up the homegroup could eventually screw regular sharing and then I'm back to reformating/reinstalling. I'm just about ready to join the Apple folks so I never have to work on Windows again.
View 2 Replies
View Related
Nov 10, 2010
problem with self-registration of my dll.The dll fails with an error - "The following files did not self-register or unregister ---- Access is Denied". I am the administrator of the machine.I have turned off the UAC. I have registry rights too.The dll has been developed by us and it is working fine in XP. The installation package has been build using InstallShield_7.01 on a Windows 7 machine.The software has been working fine on Windows XP without any issue for years now but on Windows 7 it is having problem with registration of the dll components.Is it an issue of some protected registry keys of windows 7 on which i might not have permission.If so how to access those registry. On manually registering the dll using the regsvr32, we are able to register the dll and the software works fine.I want to know how can i correct this error without manually using the regsvr32.
View 3 Replies
View Related
Jun 12, 2011
I'm reimaging one of my home systems that I intend to use as a "sterile" system (I will visit very a very limited selection sites on it, such as banking sites). I'm considering establishing the network location as "Public" instead of "Home", rationale being this would help prevent cross infection from other computers on my home network if they get a worm or virus. I do have friends that come over and hop on my network sometimes and who knows what contamination their systems have. Is this being overly paranoid? Will it cause annoying problems for this sterile system or other systems in my home network? I don't intend to share anything on this system with other computers on my home network. Seems to me that this ought to be the recommended setting for any computer always ... you can always share files using a USB drive if you really need to. Thoughts? Again maybe I am being overly paranoid. Back in the day there used to be worms that would look for ways to hop from system to system over the network, maybe that's much much harder these days. I do have a router between the DSL modem and my home network and I do run Norton Internet Security on all my systems?
View 2 Replies
View Related
Aug 4, 2011
So, I cannot login with my real email adress on MSN, I have the newest version etc.. I tried reinstalling/restarting the computer and it won't work. I've tried using different accounts, they work flawlessly. I can still log on my email through the browser without a problem. The error message I get is : Signing in to Windows Live Messenger failed because the service is temporarily unavailable.
View 3 Replies
View Related
Aug 9, 2011
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
View 2 Replies
View Related
May 14, 2012
Unable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
View 4 Replies
View Related
Aug 30, 2012
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
View 3 Replies
View Related
Mar 25, 2012
How do I install e-mail for windows 7 home premium and which one should I use?
View 2 Replies
View Related
Jan 20, 2011
New windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
View 9 Replies
View Related
Oct 22, 2009
Okay so I've installed windows and everything is working okay except i can't connect my laptop to my computer via LAN because it won't let me change it to a HOME NETWORK. It is just gets set to an unidentified Network. any possible suggestions?
Also I've look at removing this from the services but its not running it when i go under task manager, unless it somewhere else.
"##Id_String2.6844F930_1628_4223_B5CC_5BB94B87 9762 ##"
View 1 Replies
View Related
Nov 5, 2012
I recently had Windows 7 Upgrade installed over Vista. Now my email program does not work. What do I do?
View 2 Replies
View Related
Nov 29, 2011
I'm setting up a vpn connection at home. I'd also like to create the client's connection and email to my frined, so he'd just download the attachment, enter user/pass and hit connect.I've seen that done before. My coworker once emailed me a an instance of a vpn client. type: "Dial-up Phonebook" extension: .pbkI'm trying to do the same, but I can't seem to make a copy of the connection and email it.
View 4 Replies
View Related
Apr 8, 2011
i have a quick question if someone knows this for sure. I have a legal Windows 7 home premium DVD OEM with a key. If I can get my hands of the same DVD but with SP1 included!!!Will my key for the non SP1 DVD work with the Win 7 SP1 DVD ?
View 5 Replies
View Related
Mar 31, 2011
Can I access my Home PC's Internet via the works pc as there is no active phone line? is this possible with a dongle or usb wireless adapter. Tried VNC and Teamviewer but need it only to update virus definitions and google on work pc not to access programs!
Both are running Windows 7
View 4 Replies
View Related
Oct 4, 2011
I have a HP netbook that connects fine wirelessly at home but when I try to connect at work I get a message saying "invalid ip configuration"
I have used the internet connection before but this has only just started happening and other people can log on including smart phones
View 2 Replies
View Related
Sep 18, 2012
at my place of work I have my own desktop PC which is running Windows XP, we are all using Windows Server 2008 and have the ability to connect from home using a VPN and RDP which is pretty pants due to how slow and choppy the whole experience is.ow, I have managed to establish the VPN and actually map the main shared drive on our service without the need to windows RDC however I cannot seem to do the same for my own desktop PC.I want to be able to map my desktop or the hard drive on my work PC but just cannot figure it out. I have tried mapping the IP address and then using my username and password however that doesn't work either.
View 7 Replies
View Related
