Epson Photo R200 Printer Will Not Work On Home Network?
Sep 3, 2011
I have TWO computers on a "home" network (Work group, NOT Win 7 Homegroup).Computer A is new and runs Windows 7 Home Premium. Computer B is "old" and runs Windows XP Professional. Computer A has two printers attached; Epson Stylus Photo R200 and a Lexmark X3690. Both of these printers work well with Computer AComputer B has an HP LaserJet printer on the parallel port LPT1. Computer A can print documents to the LaserJet on PC B as well as photos and documents to the Epson and Lexmark printers. Computer B can print to to the laserjet and the Lexmark BUT NOT the Epson.When I try to "add" the Epson to the printers on PC B there is a message that computer A does not have the correct driver for the printer. The same message occurred when I initially "added" the Lexmark to PC B, but I was able using the CD supplied with the Lexmark to located the 32bit driver and load it onto PC A.
I tried to do the same thing with the Epson but failed to find the driver on the CD. I have tried downloading a 32 bit Epson driver from the Epson site, (using compatability mode) but even after doing that I cannot add the Epson printer to Computer B - the same message that PC-A does not have the correct driver.
I have just upgraded from XP to windows 7 x64, however windows 7 has no drivers for the epson stylus 830 printer. I am now unable to use my printer. I have been onto the epson website but no driver is listed there. I have also looked for vista drivers but the printer is only supported in XP.
Does anyone know of a workaround to get this printer working in windows 7? The printer used to work in XP x64 with the epson stylus 870 printer driver as there was no x64 drivers for the 830. There is not even a windows 7 driver for the 870 so I am really stuck.
Since I installed Windows 7, My Epson Stylus photo R220 shows all ink cartridges empty.
They are completely new cartridges. Also if I boot in to a different OS ( Linux ) It shows the cartridges are full! Is there a known problem with Epson ink monitors an Win 7 ?
I'm unable to install my Epson Stylus Photo 785epx printer program onto Windows 7 (64-bit) which is connected to a wireless home network. It hangs up and gives an error message that it isn't compatible by the OS. It worked on my Windows XP desktop fine.Epson.com doesn't NOT list any downloads for Windows 64-bit for my printer model nor am I able to find any useful links helping me with this issue on that site so please, no directions to go to the Epson web site.
New windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
Have been using Windows 7 RC 64bit system with no major problems except i cant get a driver for an Epson Photo Scanner. Epson have said no driver until the official release of Windows 7. Is there some way around this.
I reformatted my HD, and reinstalled Win 7 Home Premium, and Office 10. Before it happily printed with those programs; now they say that printer won't work with Win 7.
2 weeks ago my Ink Status Monitor for my Epson Stylus Photo R360 was working fine (Windows 7 Ultimate 64 bit),then suddenly it just stopped working (I'm not aware of any recent changes I had done that may have affected this). It still works on the printer display,but not on the PC. If I select "printer preferences" it is greyed out,but the box to disable it is unchecked. I have uninstalled and re-installed the drivers countless times now (Windows keeps wanting to install Epson ESC/P2 which does not monitor),but I have downloaded the up to date driver from Epson and still no joy.
My boss has an Epson P-7000 digital photo viewer. The other day, after he had taken the pictures off of it, he formatted it. I guess he thought that he was formatting the SD card, but he ended up formatting the unit instead. Now, when you turn it on, you get an error message that says "Invalid File System, please power off the device".I figured that the best way to fix this was to update the firmware. However, it won't let me get that far.
I have a canon mp480 and I'm trying to set up the printer so I can print wireless like I had on my old vista op system but it seems canon mp480 does not support win 7. Does anyone know where I can get a driver for this to rectify this problem.
Printer will not print. HP laptop Pavilion G7 and HP 7210 all in one printer home network. It keeps reporting printer off line. Contact administrator. I am the administrator. I changed the wire, replugged the computer and printer, contacted " system not communicting" What do I do?
My WIndows 7 decktop is part of a small home network. I can access files from the network form the Windows 7 computer but I cannot connect to the printer on the network. When I run the "add printer" wizard, it correctly lists the printers on the network, all of which are attached to one computer. Of the ones listed, only one is a real printer. The others are things like Adobe, or a fax printer. I successfully connected the Windows 7 to the "Adobe printer" but when I try to connect to the Lexmark printer, I get an error message, "0.0000000a".
Also when I try "view network computers" from the Windows XP where the printer is connected, it does not show the Windows 7 computer as part of the network. THe Windows 7 had been part of the network prior to installing Windows 7 when it had Windows XP and it had no problems. THe connection to the home network seems to have survived the upgrade to Windows 7 on the Windows 7 computer but not on the others.
I am on a Verizon FIOS wireless network. We have both a Toshiba and Sony computer. I downloaded the latest drivers for my HP Photosmart 6280 printer and was able to successfully install my printer wirelessly. However, no such luck with my Sony. I download the same drivers, and it goes through part of the installation, but at some point I get a message that 'the system cannot find the file specified', and then it rolls back the install, deleting the download.
The office network all of a sudden stopped access to a few email accounts, although they still had the same @ domain.Other email accounts still work which is strange. I tested the accounts from home and they work?The office computers are running office 2003-2010 so its not a problem with versions.All computers run off the same network which doesnt have a server or any external firewall. They all run off a home style network.
I hope someone can help me with this. I work from home (office is 70 miles away), and my Lenovo T420 Windows 7 will not stay connected via WiFi to my Verizon MI424WR ver I router. I had this problem with my old router (MI242WR rev E), and I was able to fix it by turning off the Power Management option to "power off to save power" My Lenovo is using Centrino Advanced-N 6205 Wifi chip. It reads as "working properly".
It seem obvious that there is an issue between the Lenovo and the new MI424. I have 10 other devices connecting to the MI424 without a problem. I have shut down devices to ensure that their is not an over burdening the AP issue.
Specifically, the Lenovo successfully pairs with the MI424, tries to establish an Internet connection, fails, and drops the connection (or the router does - I assume it is the laptop.) It's worked great for about 4 hours this am, then it quit working. I:
- shutdown the laptop, pulled power and battery - shut off the network, pulled the plug and let it sit for a while - restarted everything and the issue will not go away
It works fine @ work with a Cisco Network.
My company uses some McAfee SW for laptop security. Since I was blissfully working for hours and this just started up, I do not think that has anything to do with it.
Printer plugged into Win7 box - how to print from remote XP machine? describes an original difficulty I had getting remote computers (laptops and desktops) to print to a USB printer connected to my Windows 7 box. Read far enough and you'll see that I solved that problem using Networking issue - Win7 printer, XP remote machines.Fast forward 13 or so months. Since that time I have replaced the printer, I've had a motherboard and processor issue with my box (since fixed), and no interruption of things working as they should. My printer - Canon ip4800 series - is USB hardwired to my Windows 7 computer, and the other home computers - two Windows 7 laptops, an XP box, and an XP netbook - can print to the printer, and view files on my Windows 7 machine, over our wireless home network. And that's been constant through the changes described.
Then yesterday, for no known reason, my daughter's Windows 7 laptop stopped being able to print. She'd send jobs to the correct printer, but they'd just queue up, with the queue visible from her machine, but not when I looked at the printer from my machine (that is looking at the print queue from her machine shows the jobs, but looking at it from mine shows no jobs).Nothing I did would result in stuff from her machine, from any application, to go to the printer.I finally deleted the printer from her machine, figuring I'd just add it back.I try adding a printer to the laptop, it doesn't find the printer on the list of available printers. When I try adding it by typing the name - \mywin7canon ip4800 series - that fails.When I look at "network" from her laptop, my computer shows up, but if I click on it, Windows says it can't connect.
When I type ping her_computer from a DOS box, it can't find it - but when I type ping any_other_computer it finds those.Her laptop can get on the internet from our home wireless network. All the other computers in the house - Windows 7 and XP - can access shared files on my PC, and more importantly, print across the network to my USB printer.Please, patiently and precisely, guide me through stuff to check on my PC and her laptop, to get this working again. I've been through the network and sharing center on my PC and the settings are correct.Again, as it is right now, my printer is not defined on her laptop.Final, cro-magnon- level question here: If I did a system restore on her laptop, back to a point when it had been able to print, might that fix things?
