I recently purchased a new computer with operating system Windows 7. I had sound until I downloaded the drivers for Logitech wireless keyboard and mouse. I am at a loss as to how to get my sound back and continue using the keyboard/mouse.
View 7 RepliesI have lost my usb dongle of wireless mouse and keyboard.
View 1 Replies View RelatedI just set up a new build with Asus P8Z77-V mobo and windows 7. Not knowing better I tried to install Al Suite from Asus and it didn't install correctly. Anyway it was giving me error codes and I could not uninstall all of its files. So I then used AutoRun to delete the files. Well I must have deleted something I shouldn't have because now my mouse and keyboard don't work in Windows. They do work in bios and I set bios to defaults. I also started in safe mode but nothing. I tried a PS wired keyboard and still nothing. Since its new I have no back-up or recovery disk. I can't even install a disk because I can't click run. The only thing I can think to do is disconnect everything from mobo even the battery then reconnect and see what happens. If all else fails I guess I'll have to format everything and start a clean install again.
View 4 Replies View RelatedI usually dont beg, however, I have lost all keyboard and mouse funcitons in my computer and this happened directly after I installed my new Keyboard by Kensington PilotBoard. I have other 2.4Ghz wireless by Logitech as well as ps/2 and usb wired keyboards and mice by microsoft and logitech. It all was ok, the kensington mouse was not smooth so getting the buttons or whatever was recommended and went to the website for the 'most up to data' software. that was the end. after a reboot i have been lost. The computer boots up and actually functions in its serverlike capacity with its internet cable and for the center of the little home network. i just can not make the cursor arrow move. no keyboard input, I tried safe mode, nothing. I tried Safe Mode with Command Prompt, cant write a command even if i knew what to put in there. NO Safe Mode operation of usb, wired mouse or keyboard. I went to cmos and made all changes to basics , no good. but the only time the keyboard will work is directly in the bios . But not any Bios change I made had any impact on the lost functions.Since I built it myself, I have a back up or restore disc but can not access that. i can not roll anything back , cant get to device manager. or at least I havent been able to make it do anything but a boot. i do the reset to give me the options of another start in safe mode but it still has no key or mouse functions .
View 5 Replies View RelatedLost the CD to my wireless HP 2.4GHz Optical Mobile Mouse. Can i install it to my laptop some other way?
View 1 Replies View RelatedI am thinking of getting a wireless keyboard and mouse, probably a Logitech, and wonder if, when I power off the computer, the mouse and keyboard will also turn off? It seems like a setting in Power Setting should offer the choice to do so.
View 8 Replies View RelatedI have recently build a new system , windows 7 ultimate x64 and purchased a microsoft natural ergonomic desktop 7000 keyboard and mouse to use with it , I started it up yesterday for the first time , installed windows useing a wired key/mouse , upon completion shut down and restarted with the USB reciver in place , both worked fine , I then shut down and moved the PC into my office where it was to be used , fired it up , didn't work , tried instaling the drivers no joy , reseting , change batteries , no luck (strange thing though when i install the batteries the battery light glows for a few seconds then fades out , that is on both the mouse and keyboard )I then did a reinstall of windows 7 downloaded & installed the latest x64 drivers but nothing , I have tried it on my other PC (WINDOWS XP SP3) Nothing , i also took the pc back to the other room thinking there may have been interferance from the router etc , but the same nothing .
View 6 Replies View RelatedI have a custon ASUS m48A89GTD MOBO runnin windows 7, and a apple wireless keyboard and magic mouse with a cheap generic USB bluetooth dongle, which runs on a "broadcom 2.0 + USB dongle driver" .The keyboard and mouse pair with no problem, i can restart the pc and re-pair the devices perfectly.However, if i manually remove the dongle and reconnect it, all pairing info is lost and have to re-pair,
While the pc is shut down, the dongle remains lit with a "standby" power supply, If i remove the dongle and reconnect it, even if the pc is off, the problem repeats itself.same goes if i disconnect the pc from the wall outlet.Apparently the dongle has to remain "powered" for it to remember all the pairing and devices info.this is quite annoying, because i have to whip out my wired keyboard to re-pair every time this happens.
I've just gotten done backing up all the data I want backed up, uninstalled iTunes and all of it's components, ran Windows 7 advisor and am ready to proceed with the custom install but I just wanted to make sure that I would be ok using my existing wireless mouse and keyboard during the install. I have a Logitech S510 keyboard and a Logitech LX8 mouse....would I be alright to begin the installation process with these or should I connect hardwired versions instead
View 5 Replies View RelatedCan you tell me the best wireless mouse and keyboard to use with WoW?
View 5 Replies View RelatedI have read many threads on this, but I cant seem to get my laptop to wake using the wireless kboard/mouse. I have a HP pavilion dv4 with windows 7 x32, and a logitech LX710 Kboard/mouse. I am beginning to think that I will not be able to wake on this laptopAllow this device to turn on computer is greyed out in device manager. I have accessed the bios, but did not see anything that looked like it pertained to this issue. I am far from a computer expert
View 3 Replies View RelatedI have the Microsoft wireless desktop 6000.
When I leave my computer on for a bit and walk away, the screen will turn off by itself (this is not standby!!!) and sometimes, the keyboard or mouse seems to have lost its connection to the computer, and will not respond to anything, I have to hit the reset button.
I need help to undertand if is possibile resolve this possible issue.I have an ACER Revo 3610r,Atom 530 processor, I'm using it with a wireless Enermax Aurora micro keyboard (with trackball included).I would use RDP from my work pc Unfortunately after I've taken the control from my work pc I'm not able to use the wireless keyboard on the host (Acer revo ) so I've to restart with the shutdown /R command.
View 5 Replies View Relatedhow can I connect my wireless keyboard and mouse to msi desktop core i5
View 3 Replies View Relatedi installed windows 7 and now I lost my sound and wireless connection
View 3 Replies View RelatedI have a modified Hp vp17 desktop, that has had an upgrade rebuild including replacing the motherboard etc.I am not very good at explaining the system info. but here goes;The CPU is an Intel Core 2 Quad Q9450 @ 2.66 GHz.The OS is Windows 7- 32 bit.RAM is 3.00GB.I am currently using a Wireless Logitec S520 keyboard and mouse however the key labelling is coming off, which doesn't help other members of my family who are not touch typing familiar.I am looking to replace the Logitech keyboard and mouse to a compatible HP Wireless keyboard and mouse or Microsoft Wireless keyboard and mouse combo but don't really know what to look for?
View 2 Replies View Relatedhave tried several times to solve my HP dv 6700 series, but all my effort prove abortive. Can you please help me out by sending me some information on how to rectify the problems. Whenever I start the computer, I dont hear any sound from window and if I try to play music from my media player, no sound at all. I can only listen to music or sound via headphone only. I have downloaded different driver on sound and still no sound.
View 1 Replies View RelatedI use the MS Wireless Keyboard 1000 and MS Wireless Optical Mouse 2000 with my HP HDX 16t (dual core) notebook running Windows 7 x64.
I installed both Intellipoint 7.0 and Intellitype 7.0. About 50% of the time when I boot, the mouse driver fails ("This device cannot start"). I have to manually uninstall the driver and then search for new devices. It re-installs the driver and then the mouse works fine.
Windows update had 3 recent files--update to Intellitype and to Intellipoint I think. Also a MS Mouse and Keyboard Detection Driver (USB), Driver ID = 20305405. It fails to install after many attempts. I've tried turning off all start-up programs without success. Error code 80070103. I think if this could get installed it would end my mouse driver problem. Any help?
i cant click on my desktop. i had downloaded something to do with dj-ing and then clicked on it. but it started loading.. (my mouse) and it hasnt loaded. i cant click on anything on my deskptop.
View 3 Replies View RelatedWindows 7 driver for PD910P micro innovations wireless mouse?
View 1 Replies View RelatedSo ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 2 Replies View RelatedLately I have been having an annoying problem with my wireless mouse. For some reason the pointer will lag, and be very sluggish and jumpy. I've had this mouse on this computer for about a year and I've had no problem. Out of nowhere this problem is happening. I've tried re installing drivers with no luck. I tried uninstalling intellipoint and re-installing it, but when I tried I got the BSOD, and then it completely disabled my mouse and keyboard so I had to use wired peripherals to go in to safe mode and do a system restore. Now everything is working again, except my mouse is still jumpy.
View 3 Replies View Relatedi'm trying to order something from a website and the cursor want open my cart for me to look at it and finish my order. this is happening in several sites not just one.
View 1 Replies View Relatedlost the keyboard keys suddenly, some letter keys give me numbers.
View 9 Replies View RelatedMy middle mouse button doesnt work anywhere anymore. this mouse uses microsots own drivers so there is no software for it to change middle mouse button settings. after firefox updated it stopped working everywhere. and i mean everywhere even in games. like it isnt in there anymore at all. i have even opened my mouse and cleaned it so problem aint in there. tried replug the mouse. and cant find anything what says middle mouse button in windows 7 32bit settings
View 14 Replies View RelatedOk not sure how to explain this but my mouse/keyboard occasionally freeze up for few seconds and mouse will become very very slow and beeping sound come from speakers when I try to press keys on mouse or just move it, not the standard error sound its different beep. In shooters i sometimes find my self unloading a gun in the air after the lag passes please someone help.
Specs
-Windows 7 32bit Ultimate
-Wave wireless keyboard/mouse set
-CPU 2220 @ 2.40 Ghz
-4G DDR2 RAM
-Sapphire 5750 1G VRAM
I tried googling but I couldn't find exact same problem but most of answers were pointing towards overheating I installed SpeedFan I alt tabbed out of stalker to look at the reading at my cores were at 60 not sure if thats enough to cause something like I described.
My keyboard on my laptop is not working, as well as the mouse. I pluged in a usb keyboard and a usb mouse so that i may use my laptop. how can i fix this. i ran a system report and this is the outcome.Error Symptom: Device is not present, not working properly, or does not have all of its drivers installed. Cause: A device has a configuration problem that prevents it from working properly.Details: The device, PenMount Keyboard Device Filter Driver, is reporting "tv_ConfigMgrErr24"This device will not be available until the issue is resolved. The Plug and Play ID for this device is ACPIPNP03034-75450AE-0Resolution: 1. Verify the correct driver is installed. 2. Try updating the drivers using Windows Update. 3. Check with the manufacturer for an updated driver. 4. Attempt to uninstall and then reinstall the device using Device Manager. Related: Explanation of Error Codes Generated by Device Manager Manage Devices in Windows
View 10 Replies View RelatedWas playing Left 4 Dead before and noticed whenever I hold down any key on my keyboard (Logitech G15), and try to move my mouse (G9), the mouse moves, the suddenly stops for a split of a second, moves to where I want it, then stop, etc.
Almost as if the MOUSE had latency issues.
Opened up Autodesk Maya afterwards, spun my scene around using Alt + Mouse, and it's all fine.
Anyone else got anything weird like this? Running 64-bit Windows 7.
FIXED. I verified game cache and restarted computer as well as swapping my USB slots.
Yesterday I got on my computer everything is running fine. Today got on it for awhile and suddenly the USB keyboard and USB mouse lock up. I've tried restarting it and I can't get past the first screen. It says keyboard not present or something around those lines.I plugged in a ps/2 keyboard and it works but my USB mouse will still not work. I've tried going into BIOS and making sure USB was enabled. Tried a system restore but for some reason it wont complete.
View 1 Replies View RelatedI have a Dell Zino HD. After some Windows updates (may or may not be relevant) the mouse and keyboard have stopped working completely. They work for the BIOS and for F8 options but once Windows has started to boot properly, they stop. I therefore cannot log on.
View 1 Replies View Relatedi've been experiencing some issues with mouse and keyboard lately. Both of them randomly freezes for a couple of seconds and then just come back normal. Anyway, i tried to ignore this for a couple of days but now when they freeze, they won't come back and i have to reboot the computer manually.I've tried starting windows through safe mode. It still freezed but for a second this time. I'd be so glad if you guys could show me to fix this problem.
View 2 Replies View Related