Computer Says No Bootable Devices?

Oct 10, 2012

my laptop when i turn it on says no bootable devices??? what should i do??

View 1 Replies


ADVERTISEMENT

Computer Hangs After Post (unless There's A Bootable CD In Tray)?

Jun 12, 2011

Computer posts, then checks hard disk RAID status (Healthy), then a white blinking cursor appears on upper left corner on black screen, and hangs there forever, UNLESS i put in a Windows bootable CD, then based on my boot priority order (CD ROM, HD) it reads the CD, then it displays "Press any key to boot from CD or DVD...", for which i don't press anything, and the computer proceeds to boot Win 7 OS correctly. So basically it doesn't boot unless i just have a bootable CD in tray.

View 10 Replies View Related

No Bootable Device Error, Can't Start Computer

May 29, 2012

My Toshiba Satellite L755 is receiving the following error at startup:

Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key

This occurred after I used Toshiba Wizard to clear the hardrive. I was attempting to get everything back it's original state.

So far I have gotten into setup by holding f2 at startup. The boot tab reads:

1. HDD/SSD Hitachi HTS545050B9A300 (S1)
2. USB
3. ODD TSSTcorp CDDVDW TS-L633F (PM)
4. FDD
5. LAN Atheros Boot Agent

I have also tried disconnecting the battery and harddrive and then reconnecting them.

View 9 Replies View Related

No Bootable Device Error, Can't Start Computer?

Nov 7, 2012

NO BOOTABLE DEVICE--INBSERT BOOT DISK AND PRESS ANY KEY FOR REALTEK RTL8102EPCI-E ETHERNET CONTROLLER v1.07 (080320) media test failure, check cable

View 2 Replies View Related

Computer Not Responding To USB Devices?

Aug 2, 2010

for awhile I was constantly getting a message from windows saying my USB bandwidth was exceeded when I had my usb devices hooked up. So being the idiot I am I disabled the USB reserve or whatever that windows has in its USB devices section. Now when I plug any USB device in my computer windows doesnt notice it or do anythingIm not the most tech savy person ever, but does anyone know how to fix it?

View 3 Replies View Related

Getting MTP Devices To Connect To Computer?

Aug 30, 2011

I am having problems getting MTP devices to connect to my computer.Originally I had this problem with my Canon T1i, so I bought a memory card reader.Now the problem is occurring with my Google Nexus 7 Tablet.Other USB devices like keyboard, USB drives, mice... work fine?I plug the USB device in, it attempts to install and then I get a "Device driver software was not successfully installed" for MTP USB Device.Typical error message in Device Manager:Quote :This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

View 9 Replies View Related

Always Show Portable Devices In Computer?

Sep 6, 2012

Such as a mouse, a mobile, or an external drive.I mean make them visible (in My Computer) even though they're not connected so it's easier to remember what devices I use. My memory is awful, don't ask.Obviously I know I wouldn't be able to access the files unless the devices were connected, but the point is to make their icons show up as if they were connected even though they won't actually be of any use.

View 2 Replies View Related

Computer Not Recognizing New Devices Through Usb Connection

Sep 6, 2012

i have an acer aspire 7745 laptop and when i use the usb connections my computer does nothing it doesnt recongise that any device has been plugged in. troubled shoot installed new drivers and check devices everything says its fine?

View 1 Replies View Related

Apparently No Audio Devices On Brand New Computer?

May 16, 2011

I've just bought a new computer and put it all together, installed drivers etc but no sound is working.If I go to Control PanelHardware and Sound it says "no audio devices are installed".However, if I go to Device Manager, under "Sound, video and games controllers" there are 4 instances of "NVIDIA High Definition Audio"Now I guess thie Nvidia drivers might work through the HDMI connection on the GPU, but my soiund setup is with the old audio jacks that plug in to the back of the motherboard.I tried uninstalling the nvidia audio drivers in device manager but when I rebooted they just installed themselves automatically!

View 4 Replies View Related

Computer Drops Internet Connection - Other Devices Do Not

Jun 18, 2011

So I went to my event viewer, and this is what it says whenever it's happened the last couple of times:

Name resolution for the name dns.msftncsi.com timed out after none of the configured DNS servers responded.

The client was unable to validate the following as active DNS server(s) that can service this client. The server(s) may be temporarily unavailable, or may be incorrectly configured. 68.94.156.1

And I went back through older logs of when the same thing would happen, and those two were the ones that popped up the most. However, this also popped up from time to time:

Name resolution for the name www.microsoft.com timed out after none of the configured DNS servers responded.

Name resolution for the name www.australian-charts.com timed out after none of the configured DNS servers responded.

Now, I know my way around a computer, but this internet talk is pure "gibberish" to me, for lack of a better word.

Additional information: The connection to my router is wired, not wireless. My PS3 and my laptop can stay connected/have never dropped a connection, while my desktop does it enough that it's beginning to bother me.

View 8 Replies View Related

Netflix-Computer Registering As Multiple Devices

Feb 1, 2011

When streaming Netflix, my computer is registering as a new device each time I play a movie. The Device ID is different when I check on all my registered devices (the only device that uses my account is my one computer). I have not changed any settings, reinstalled Windows, or made any drastic changes in the system. I do not use a router and am using Cox Communications as my ISP.

[URL]

View 1 Replies View Related

Computer And Media Devices - Network Categories

Oct 21, 2009

Does anyone know why in my Network screen, my actual machine is noted as a Media Device, whereas the other machines on my network comes under Computer?

The other machines's Workgroup is WORKGROUP, amd the actual machine's workgroup is Unidentified Network.

View 9 Replies View Related

Get Computer To Recognise External Memory Devices?

Mar 8, 2012

my brother used a mac lap top and i think he formated it to beable to copy movies to my terabite. it now does not recognise it on computer ore dvd which it did before

View 1 Replies View Related

Reinstall Cd And Dvd Devices On Windows 7 Home Computer?

Jun 3, 2012

Reinstall cd and dvd devices on windows 7 home computer

View 1 Replies View Related

External Hard Drive Shows Up In Devices But Not In Computer?

Jan 26, 2012

I got a problem, my external hard drive (westen digital 1.0TB) isn't popping up my computer. I can see it in devices (USB to ATA/ATAPI bridge) but i can't acces it.What i've done already:Computer Management-> Disk Management. Than ive to initialize the disk, i can choose between MBR and GPT. In both cases i got the error: Data error (cyclic redundancy check). I can't chance any letter Downloaded different programs but non of them worked

View 2 Replies View Related

Move External Drive To My Computer From Printers And Devices?

Dec 15, 2011

Some of my external drive find on the PC... Windows 7 and other external drives don't.. Those shows up in the printer and devices.. How do I get them to work as a letter drive in my computer....I have bought 2 floppy drives and don't work either... everything works on my laptop.... Just so much trouble to hook everything up..

View 3 Replies View Related

Can't Connect Wifi Devices To Wired Devices?

Jun 25, 2011

I have been unable to connect to anything on my wired network, for about the last week. I don't remember making any changes however, I just became unable to connect.I having done a little troubleshooting.1. I can connect to the shares of my Windows Home Server if I use the IP address. The name does not resolve.2. Flushed DNS and restarting DNS server. Flushing DNS works on one client, to allow browsing by the name & restarting DNS works on the other. However neither works after a restart.3. Only my Wifi clients are experiencing this issue. My wired clients, desktops, PS3, Xbox 360, and Boxee can connect perfectly.This issue is not limited to my server. I can't connect to shares on my desktop, nor print to my wired printer.Some network background:I have DSL through CenturyLink and have a Linksys E2000 router.

View 2 Replies View Related

Computer Says "no Devices Found" For Sound

Jun 7, 2012

We just built a computer yesterday and as we plugged in the speakers on the 7.1 audio on the motherboard, there was no sound! we checked control panel>hardware and sound>sound> and it says "no devices found". we downloaded sound drivers from "realtek", installed it, restarted, still a no go! but as we plugged in the usb headset, voila, there was sound! what we dont understand is why wont the 7.1 audio channel work on the motherboard?

View 22 Replies View Related

SSD To Bootable HDD

Jan 6, 2013

After I install the software I need on the SSD I would like to make a bootable copy of the SSD and install it on the HDD to have as a boot able backup. I have read many posts about this yet cannot understand what I need to do.

View 2 Replies View Related

Bootable USB

May 7, 2009

i'm looking into getting a thumb drive and i was wondering what you guys think would be best?

i know there are a million different brands but i was looking for something to load a Windows 7 build onto and install quickly.

i've been using dvd's and its cool to see all of them in order from 7000 to 7100 but after all the clean installs i'm doing i know dvd's aren't the quickest.

so! what type of USB should i get and how do i make it bootable?

View 2 Replies View Related

2 Bootable ISO's On 1 Pendrive

Aug 3, 2011

just got myself a 16GB Kingston Drive and what i want to do is put 2 or more bootable images on there create my own boot menu so i can choose what to use when i need it.

View 9 Replies View Related

2 Separate Bootable HDD And OS?

Aug 5, 2010

Have two HDD, one with Windows 7 professional 1TB SATA and other older win XP sp3 160gb SATA. To keep working environment separate, I use one HDD at a time, disconnecting other HDD. It used to work fine except 2 days back, when I had shut down winXP 160GB HDD with hibernation and after detaching that sata cord and reconnecting 1 TB sata cord, there was a major startup failure. With Windows 7 DVD RE, after opening system recovery dialogue box, no options were working including startup repair, system image recovery and system restore. In command prompt, c drive could not be detected. However, after bootrec.exe/fixmbr win 7 started but is a bit slower.How to avoid this problem? Does hibernation of one HDD interferes with startup of other HDD even though no RAM changes take place?. Does frequent change of HDD like this cause hardware/software damage?Specs - Core 2 duo 1.83ghz, 946gzis mb, 2gb RAM, ATI radeon 4850 512mb, VIP 600w smps.

View 3 Replies View Related

No Bootable Device?

Oct 7, 2010

when i turn on thers a blank screen saying f2 and f12,iv,e pressed both and nothing happens,just a other blank screen saying no bootable devices, i connected a external hard drive and put a windows disc in to try reinstall windows,but still nothing ,windows goes through the motions,and then says something about not been able to find a hard drive

View 9 Replies View Related

How To Make A Bootable ISO ?

Jul 16, 2009

Someone want to explain how the hell you make a bootable ISO from these leaked builds?

Everything I try is FUBAR.

Edit: Okay..nevermind..I Frankenstein it and figured it out finally..I just copied the install files onto my USB flash drive and rebooted and set to boot to USB drive.

No need for an ISO

Edit 2: ...Okay..I give up..I get an error during install saying Windows can't install the required files. The file may be corrupt or missing. bla bla

Anyone else getting this with the 32bit leaked copy that just came out?

View 3 Replies View Related

Making And Using A Bootable USB Key?

Nov 10, 2011

I'm using an HP laptop and made a bootable flash key with the Microsoft utility (which I downloaded from Microsoft) to make a Windows 7 installation. I(supposedly) changed the boot order in the bIOS to look first at the key. Didn't work - booted directly into Windows 7 (seemingly bypassed the bootable key)1. How do I tell if the USB key is bootable?2. What could have prevented my BIOS from remembering my new boot order?3. What might be the reason(s) why my laptop won't boot from the USB key?�HP Pavilion dv5t-1000 CTO Entertainment Notebook PCSerial Number: CNF84816H3 Product Number: kq573av

View 2 Replies View Related

Getting USB Formatted/bootable?

Mar 7, 2011

I am trying to make my 1TB eGo USB 2.0 Desktop Hard Drive bootable. I am running Win 7. The bios hardware supports booting from a USB drive, and I am able to select the USB drive from the boot menu. But when I choose the USB drive, I get: A disk read error occurred Press Ctrl+Alt+Del to restart I am able to read/write from the USB drive normally via Win 7 with no problems, but I am missing that something "bootable" - what is it? I used bootsect make the USB drive bootable.(the USB drive is formatted NTFS and could this matter � my computer is formatted 64 bit and the USB drive is formatted with whatever you get when you select NTFS -would that be 64bit in my case?)

View 9 Replies View Related

Bootable USB Not Seen By BIOS?

Jun 6, 2012

Whereas it was possible for my computer to boot from a USB key until now (there is the BIOS option to make it choose USB device in priority on boot), it does not work anymore : When I use a bootable USB, it goes directly on windows When I use a brand new and not bootable USB I don't even have the black screen with "missing operating system" I used to have.

View 6 Replies View Related

Windows 7 DVD Not Bootable?

Apr 24, 2011

the problem now when i restart my pc it doesnot read it and i made the dvd boot before the hard disk and it still not booting from it.I tried to search before posting this thread, but i amnot very good on these things and i didnot understand how to solve it, please give me the steps for doing it and don't tell me "burn the cd" or "do something" as i don't know how to do these things

View 8 Replies View Related

How To Make Win 7 Dvd Bootable ?

Dec 3, 2009

I have a new hdd and I got a dvd with Windows 7.

Unfortunately it isnt bootable, so how can I make it bootable?

I only have a laptop(with dvd burner) an empty dvd and the Windows 7 dvd.

So how can I make it bootable?

Rip the files off, and then?

View 3 Replies View Related

How Can I Make A Bootable DVD?

Mar 12, 2009

Maybe it's a stupid question,but I can't figure it out how...?

At this moment,I have Win 7 buil 7000 32 bit installed,and I want install x64 version,so I have downloaded Windows 7 build 7048 x64,but it's not a bootable ISO file.

I managed to make an ISO,but have never did and don't know how to make a bootable ISO file,I have already tried several programs(PowerISO,MagicDisc,ImgBurn,Nero 8),but every time I burn an image on disc,it doesn't work.

If there is someone who is willling to explain me correct way step by step,I'll be really greatful.

View 9 Replies View Related

How To Make W7 Bootable DVD ?

Dec 11, 2009

I downloaded OFFICIAL Windows 7, but there is no ISO file so how do I make it bootable? There is a setup.exe file but since i have VISTA 32 bit i cannot clean install to W7 64 . So what do I do?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved